BEHR Premium

Model # 95036

Internet # 203938253

1-gal. #PFC-14 Iron Ore 2-Part Epoxy Garage Floor Coating Kit

This item has been discontinued.
The Home Depot no longer carries this specific product.



Model # 95036

Internet # 203938253

The BEHR Premium 2-Part Epoxy Garage Floor Coating is a decorative high-performance, water-based concrete floor coating. It provides long-lasting protection against motor oil, gasoline, antifreeze, brake fluid, salt, and hot tire pick-up. This durable semi-gloss finish is easy-to-clean and also resists scuffing, fading, cracking, peeling and blistering. It requires no priming and once mixed, is ready for use, allowing up to 4 hours of working time (pot life). It is formulated to withstand the harsh elements common to most interior concrete floors, new and old, while maintaining an easy-to-clean, showroom quality appearance. Ideal for use on garage floors, basements and other interior concrete floors.

California residents: see  Proposition 65 information

  • Ideal for interior concrete floors
  • Resists scuffing, fading, cracking and peeling
  • Resists motor oil, gasoline, antifreeze, brake fluid, salt and hot tire pick up
  • Epoxy acrylic formula
  • Available in custom colors
  • Up to 250 sq. ft. of coverage per kit
  • Durable Semi-Gloss finish
  • Easy clean-up with soap and water
  • All inclusive project kit
  • Kit includes: cleaner/etcher, color flakes, 3/8 in. roller cover, 2 in. brush, stir stick
  • Actual paint colors may vary from on-screen and printer representations

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.


Container Size 
1 GA-Gallon 
Coverage Area (sq. ft.) 
Application Method 
Application Method 
Chemical resistant 
Color Family 
Browns / Tans 
Iron Ore 
Dry to touch (min.) 
Mildew Resistant 
Number of components in formula 
Paint Product Type 
Interior Paint/Stain 
Paint/Stain Base Material 
Epoxy/2 part 
Paint/Stain Clean Up 
Soap & Water 
Paint/Stain Key Features 
Chemical Resistant,Prevents hot tire pickup,Skid Resistant 
Paint/Stain/Waterproofer Product Type 
Basement, Floor & Garage 
Primer required 
RGB Value 
Skid Resistant 
Substrate/Surface Use Type 
Time before recoating (hours) 
Warranty / Certifications
Manufacturer Warranty 
Limited Warranty 


Color Family: Browns / Tans
Brand: BEHR Premium
Coverage Area (sq. ft.): 250
Container Size: 1 GA-Gallon
Review Rating: 2 & Up
1 Question2 Answers

Customer Questions & Answers

1-gal. #PFC-14 Iron Ore 2-Part Epoxy Garage Floor Coating Kit
1-gal. #PFC-14 Iron Ore 2-Part Epoxy Garage Floor Coating Kit

Ask your questions. Share your answers.

Clear Search Term
2 answers

can this product cover old paint, or does old paint need to be removed

This question is from 1-gal. #PFC-14 Iron Ore 2-Part Epoxy Garage Floor Coating Kit
Asked by
Buda, TX
August 7, 2013
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

Asked by
Read all my Q&A
August 7, 2013
Dear Ruthless,
Thanks for your interest in our Behr Premium 2-Part Epoxy Garage Floor Coating. Our Behr Premium 2-Part Epoxy Garage Floor Coating is suitable for use on previous coated surfaces in good sound condition. Listed are the recommended steps,
Option 1. If the majority of the floor has loose or peeling paint, it may be necessary to completely strip the entire surface with Behr Premium NO. 992 Read More
Dear Ruthless,
Thanks for your interest in our Behr Premium 2-Part Epoxy Garage Floor Coating. Our Behr Premium 2-Part Epoxy Garage Floor Coating is suitable for use on previous coated surfaces in good sound condition. Listed are the recommended steps,
Option 1. If the majority of the floor has loose or peeling paint, it may be necessary to completely strip the entire surface with Behr Premium NO. 992 Concrete & Masonry Paint Stripper.
Option 2. If the majority of the floor is in good sound condition then you may only need to remove any loose or peeling paint and scuff sand any glossy surface areas. Any previously coated areas in good sound condition can be coated over.
3. Use Behr Premium NO. 990 Concrete & Masonry Degreaser & Cleaner to clean previously coated surfaces in good sound condition.
4. If necessary, use Behr Premium NO. 991 Concrete & Masonry Cleaner & Etcher to clean and etch any bare smooth concrete areas.
5. Spot prime all bare concrete areas with Behr Premium NO. 880 Concrete & Masonry Bonding Primer to increase adhesion of topcoat to the surface.
Read Less
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

August 7, 2013
Hello Ruthless,
You do not need to remove the paint that is already on the surface. Just make sure that it is not flaking or peeling. If there is peeling or flaking paint, sand the surface to smooth it down. If the paint on the surface is shiny, sand the entire surface before painting.
- Christine
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
1 of 1
  • 2016-07-01 T20:58:13.026-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_203938253, prod, sort_default
1 of 1
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 528ms


Rated 2.8 out of 5 by 13 reviewers.
Rated 1.0 out of 5.0 by pure fantasy i can guarantee you the picture on the box is of a floor immediately after the coating was applied, and perhaps before it has even fully dried. there is no way any garage floor coated with this product would look like that after a vehicle has parked on it even just once, no matter how closely the instructions are followed. the etcher is a joke as far as prepping a real garage floor to accept a coat of any product. don't bother with it. if it isn't a new garage floor, lightly grind off the very top surface to prep it for whatever you put down. this epoxy is product VERY THIN (most will evaporate) and there is BARELY enough to cover a 1-car garage, so as soon as it dries it will be like the thinnest layer of paint you can imagine. no matter how long you let it dry, it is a magnet for hot tire marks. you will have thick black treadmarks the first time you drive around and park on this surface, and odds are your tires will pull up this covering where you park within a week even if you follow all the instructions. it is money down the drain and a waste of time and effort. January 26, 2016
Rated 2.0 out of 5.0 by Love product hate shipping I have bought nine of these and of those - three had half of the paint leaked out of the still sealed container when they arrived and they would not refund because they consider it a custom item - great product - really bad return policy February 14, 2015
Rated 4.0 out of 5.0 by Cement Floor covering Product went on fairly easily and looks good so far. We will see how it holds up over time. Certainly a big step up from the cement floor that was there before with multiple paint colors on it from previous painting jobs on the walls.. September 23, 2014
Rated 1.0 out of 5.0 by Terrible Results The product has fairly easy to follow instructions, and looks wonderful when finished but....., after soon after driving on the product it picks up even when the tires are not hot!!!!. I prepared the surface with a cleaning agent, muriatic acid and then the kit supplied cleaner/etcher, rolled on the epoxy and 3 coats of their recommended wet look sealer. I looked amazing, came out better then I was expecting. My friends thought I had it professionally done. I had a plenty of time to look at the empty garage because I waited the recommended 14 days before driving on the floor. I bought a laser temperature gun to make sure the tires were always cool before driving in for the evening, my neighbors even commented on how I would always come home and wait till night to pull my cars in. Now it has only been a few weeks and the area under my tires are pulling up like crazy. Looks terrible and not sure what to do. I know most people get in a hurry and do not follow the recommended instructions from the manufacture so I was not in a hurry and followed them to a tee, I even made a few phone calls to the Customer Service for clarification but all for not, crummy product that I believe is inferior and should not be on the store shelves. My friend has one of Behrs competitors products in his garage and 6 years later its comparable to mine in less then 3 months. October 29, 2015
Rated 5.0 out of 5.0 by eye catching upgrade, easy application! We just finished off the floor of our garage with this wonderful product. Three of our neighbors have already come by to comment on how beautiful and spacious the new epoxy floor makes the space look. We no longer feel embarrassed leaving the garage door up on the weekends while we do our yard projects. We love that in just one weekend we have a whole new and improved look to this space. It was a very simple process too. The directions are laid out clearly, the only part that took a bit of time was the drying. We have already recommended the kit to friends and family. Everyone notices the improvement! December 12, 2014
Rated 1.0 out of 5.0 by Garage floor ruined by this product Purchased this product about 2 years ago. Followed the instructions for proper preparation as I wanted to look really nice. Did not park on the floor for several days per instructions. After a couple of weeks the epoxy started pulling up where car tires were parked. later started having spots bubble up in spots. Now the floor looked bad and was faced with how to fix it. I wanted to put a second coat in hopes of fixing it but was afraid of throwing good money after bad but could not come up with another solution. Went to Home Depot to purchase more but was told the product was discontinued. Call stores and found a store 80 miles away that still has some. Put a second coat on it. Same thing. Now after 2 years my floor is ruined as over time more spots peal on real humid days. I am not only out a lot of time and money but will have to spend more to get this product off. My floor looks worse than it did before I did any thing to it. I see this product is back on the market. Do not know if it is different than what I purchased. I am an engineer and do a lot of home projects. Followed the instructions for proper preparation but this defective product has ruined my garage floor. Have always used Behr products because I thought it was quality. March 10, 2015
Rated 1.0 out of 5.0 by this is enough for 250 sq ft, Our garage s 400sq f We had to buy 2 of these because our garage is 400 sq ft and we had to throw away the left overs. March 12, 2015
Rated 1.0 out of 5.0 by product has problems We hired a contractor to apply a custom color to our garage floor. He prepped the floor with a sander and acid. Black showed through the color. He waited two days and then applied a second coat of the epoxy to our 2 car garage. About 10 days later, there was a rapid temperature change and the floor was slippery and slick. Behr Technical support was helpful and explained that it was due to surfactant leaching. On Christmas Eve day we washed the floor with Dawn/water, rinsed and allowed it to dry. This seemed to work. We kept the car out of the garage for two weeks to be sure the floor was dry. When we drove the car in the garage, tread marks appeared. And with the next rapid temperature swing, the slippery floor returned. We are now searching for another product to apply to our floor. January 22, 2014
  • 2016-06-25 T18:54:30.811-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_13, tr_13
  • loc_en_US, sid_203938253, prod, sort_default
2 >>
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 282ms