0000346341270
Discontinued

Bosch

Model TS2000

Internet #202349470

Gravity Rise Table Saw Stand

This item has been discontinued.
The Home Depot no longer carries this specific product.

  • Includes stand, tires
  • Easy to setup
  • Durable and strong

Frequently Bought Together

Product Overview

Take the backache out of setting up and breaking down your table saw with the revolutionary new Gravity-Rise Wheeled Saw Stand from Bosch. Designed for general contractors, trim carpenters, woodworkers and remodelers, this portable and rugged stand is easy to use. Setup is a snap. Simply turn the release lever, put your hand on the tabletop and the stand raises or lowers relative to your hand pressure until you find just the right height.

  • Gravity-rise, wheeled table saw stand measures 24.5 in. H x 29 in. W x 42 in. D
  • 8 treaded, pneumatic wheels for tough terrain
  • Heavy gauge, 1-1/2 in. steel tubing supports more than 250 pounds of force
  • Equipped with universal mounting slots to accommodate most portable table saws

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

14 Questions18 Answers

Customer Questions & Answers

Gravity Rise Table Saw Stand
Gravity Rise Table Saw Stand

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
This question is from Gravity Rise Table Saw Stand
 
4 answers

Looking for a rise table saw stand for my ryobi table saw...what do you suggest. It's a 10" saw. I see the bosch one and wonder if it will work.

This question is from Gravity Rise Table Saw Stand
Asked by
Judie
Barre, VT
December 7, 2011
Model # TS2000
Internet # 202349470
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (4)

Asked by
Rhinelander, WI 54501, USA
Read all my Q&A
March 11, 2013
Answer: 
Yup, the Bosch should work great. It comes with pre-drilled holes for some saws and drilling instructions for the others. So you may have to drill four holes through aluminum, but it comes with easy to follow instructions.
Assembly is required, but well worth it as there is no better stand on the market that I am aware of. I love mine!!
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Denver, CO, USA
Read all my Q&A
February 19, 2013
Answer: 
Funny. Just wrote my review of the Bosch stand. And I mounted my 10" Ryobi on it. The stand did require drilling a couple holes, but it went well once I established how I wanted the saw to sit on the stand. Be aware that some mounting holes line up with the legs of the stand and will not work well.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Staten Island, NY, USA
Read all my Q&A
January 30, 2012
Answer: 
The Ryobi shares a lot of the characteristics of Craftsman which this stand does accomodate. overall this is a great stand
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Asked by
Read all my Q&A
December 9, 2011
Answer: 
The list of tools that fit the TS2000 stand does not show your make or Model of Saw. There are two plates on top of the stand and as long as your saw will fit on those two plates you should able to drill the four holes you will need to mount your saw.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
This question is from Gravity Rise Table Saw Stand
 
2 answers

This would be great for me; however, the 24 1/2" height seems rather low. Seems like it should be at least 30-35 inches. or am I reading it wrong?

This question is from Gravity Rise Table Saw Stand
Asked by
Michigan UP
Read all my Q&A
October 10, 2013
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

Asked by
Read all my Q&A
October 11, 2013
Answer: 
Thank you for your question. The TS2000 Gravity Rise Stand is 24-1/2 inches tall.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

October 10, 2013
Answer: 
Hi Marber,
Remember the saw will sit on this stand and when it is attached the saw table height will be in the 34-36 inch range.
Mike,
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
This question is from Gravity Rise Table Saw Stand
 
1 answer

will the bosch cm12 fit on this stand

This question is from Gravity Rise Table Saw Stand
Asked by
Spring, tx
Read all my Q&A
December 4, 2015
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

Asked by
Read all my Q&A
December 7, 2015
Answer: 
Thank you for your question. The TS2000 is designed for our Bosch Table Saw models 4000 and 4100. The CM12 would work with our Gravity Rise miter saw stand T4B:
http://www.homedepot.com/p/Bosch-Gravity-Rise-Miter-Saw-Stand-with-Wheels-T4B/203899895
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
This question is from Gravity Rise Table Saw Stand
 
1 answer

Dust Collection

This question is from Gravity Rise Table Saw Stand
Asked by
Wilmington, DE
Read all my Q&A
December 3, 2015
Would it be difficult to fabricate a box underneath the stand to collect the dust from the saw and attach to a vacuum? There is an opening, so I wonder if something might be slid into place below the stand.
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

Asked by
Read all my Q&A
December 4, 2015
Answer: 
Thank you for your question. You could put a box underneath the stand to collect the dust however it would be in the way if you needed to fold up the stand to move the table saw. We do offer the TS1004 dust collection system that connects to the dust port of the table saw and would not interfere if the stand would need to be folded up for transport.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
2 »
  • 2016-08-24 T12:39:47.140-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_202349470, prod, sort_default
2 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 105ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 4.5 out of 5 by 22 reviewers.
Rated 5.0 out of 5.0 by Dewalt Table Saw Stand The stand is light weight easy to use and extremely portable. The mounting options seems to be able to accommodate a variety of portable saws, I mounted a 10" Bosh saw to the platform and it works great. The ease of setup is amazing, from the transport position to setup ready to work in less than 10 seconds. August 14, 2015
Rated 5.0 out of 5.0 by Quality Saw Table This saw table is a very sturdy and easy to use saw stand. March 22, 2016
Rated 5.0 out of 5.0 by Superb Design The Bosch gravity rise table saw stand is robust and very well designed. It makes moving and storing the saw a snap. I give it my highest recommendation. Prospective buyers should also know it will easily accommodate some non-Bosch brands of saws. March 5, 2016
Rated 5.0 out of 5.0 by What an improvement to my table saw. I've owned a Ryobi BT3000 for years, love this saw but very difficult to move around and transport. Thought about getting new portable saw but didn't want to give up my Ryobi. Wasn't sure if it would fit, couldn't find any information on internet. Purchased knowing that Home Depot would take it back if it didn't fit. Had to drill four holes but worked out great now have a saw that is portable and easy to store. April 22, 2013
Rated 5.0 out of 5.0 by Great item The item was alittle confusing to assemble, but I have had worse. The holes didn't line up for my particular saw, but thats just my luck and I was able to drill the needed holes. Once done the table is exactly what I was looking for and I am very pleased with the product. December 15, 2015
Rated 5.0 out of 5.0 by Bosch table saw stand I wish I had bought this a while ago, it's the perfect addition to the Bosch table saw. It really makes moving the saw a breeze. December 22, 2015
Rated 4.0 out of 5.0 by Bosch TS2000 Table Saw Stand I had an older Ryobi table saw with a stationary base. My Saw didn't fit this Bosch base which had a lot of holes to fit many other saws, but not a big deal, I just drilled holes to match and was good to go. This base is built to withstand a nuke! It is quite heavy, heavier than the saw itself! In other reviews there were problems inflating the tires, not on this one though, the wheels are solid. I have raised and lowered this base and all works well. When you get the base there is quite a bit of assembly to do, but not too difficult. I haven't tried to bring the combo (saw & base) up or down stairs, but wit the weight it will not be an easy task. It will take some muscle to handle the weight and taking it one step at a time carefully. At least I can fold this up and tuck the saw away for storage now. I think they could have engineered this to be a lighter weight assembly. At $200 it is a bit pricey but I caved in because there really wasn't any competition out there to buy. July 7, 2015
Rated 5.0 out of 5.0 by Great This stand is every thing it claims its easy to put together and I have been using it on the job site and it works great, it beats setting up saw horses and plywood May 12, 2015
  • 2016-08-20 T11:40:56.773-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_22, tr_22
  • loc_en_US, sid_202349470, prod, sort_default
2 >>
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 54ms
  • REVIEWS, PRODUCT