Model # D180005 V

Internet #203261579

DEWALT Master Hole Saw Kit (14-Piece)


Master Hole Saw Kit (14-Piece)

  • Contains 11 hole saws and 2 mandrels
  • Includes rugged carrying case with latches and handle
  • Diagram depicts proper placement of each piece in case
$92.99 /each

Frequently Bought Together

Product Overview

Hole diameters common to carpentry, plumbing and electrical work are included in this 14-Piece Master Hole Saw Kit from DEWALT. The durable bi-metal drill bits make exacting circular cutouts in plastic, metal and wood materials, aided by double-tooth construction that’s designed to cut clean and fast. It includes a carrying case, two mandrels and 11 hole saws deep enough to bore through 2-by lumber in a single pass.

  • Includes 3/4 in., 7/8 in., 1 in., 1-1/8 in., 1-3/8 in., 1-1/2 in., 1-3/4 in., 2 in., 2-1/8 in., 2-1/4 in. and 2-1/2 in. hole saws
  • Deep-cut design saws through 2-by lumber in a single pass
  • Double-tooth construction produces sharp, clean cuts
  • 30-day money-back guarantee




More Products With These Features


Customer Questions & Answers

Is this used with a Dewalt drill?

Asked by: Cheri
It can be used with any brand of drill
Answered by: Blair
Date published: 2016-08-16

Is this kit compatible with other drills other than Dewalt, like Hitachi drill?

Asked by: Gordon
Answered by: Blair
Date published: 2016-08-16

Per GSA Military requirements, what is the Country of origin?

Per GSA Military requirements, what is the Country of origin?
Asked by: hdshopper
Answered by: SBD_Product Expert
Date published: 2017-01-12

Should this item be used with treated wood?

I used 1 bit to drill multiple holes in treated wood and after a few the bit was completely smooth. The teeth wore down completely. I'm very surprised and unhappy with this purchase.
Asked by: Amo
Yes it can be used o on metal treated wood is an acceptable application
Answered by: twright
Date published: 2016-07-21
  • y_2017, m_3, d_25, h_5CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_6
  • loc_, sid_203261579, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 15ms

Customer Reviews

Master Hole Saw Kit (14-Piece) is rated 4.4 out of 5 by 9.
Rated 5 out of 5 by from One of the most complete hole saw sets I really like this Dewalt hole saw set. It has some of the best options in various sizes I have ever seen. The set is holding up very good. The case works really good to hold all the saws and arbors. It cut though a stainless steel sink with ease. They hold up incredibly good to average use and a little abuse. I like how the arbors hold the hole saws. The system is a must have for the do it yourselfer.
Date published: 2016-11-27
Rated 3 out of 5 by from Double Trouble Purchased this master kit for a large variety of sizes, but was displeased when I discovered a second 1 3/8 in place of the 1 1/2". This seems like a lazy error on manufacturing's side that is pretty obvious. No me gusta lazy mistakes. Otherwise a quality product, I will purchase the 1 1/2" separate.
Date published: 2015-06-09
Rated 4 out of 5 by from Great hole saw set Great set....they are sharp, they hold up well and they are in a compact case. My only wish, I need a 2 larger bits..
Date published: 2016-08-16
Rated 5 out of 5 by from Great Dewalt the number one in tools am a electrician and Dewalt is the name with go for.Thanks Dewalt
Date published: 2016-05-10
Rated 5 out of 5 by from Good bits First impressions: Very nice looking kit with a blade "map" in the case that tells you the size of each blade. The photo in the ad doesn't clearly show all sizes so I have attached a better photo of the map. Nice latches on each side of the case. Two impressive looking mandrels (one for each general size). Analysis: The saws seem to work well, but I was only able to test with wood, not metal. The results were a bit mixed. The blades stayed sharp throughout the process. The holes were good enough but the yellow paint came off very quickly and easily, not that it matters much. For a while I could not figure out the mandrel for the smaller blades. It has a "quick release" indicated on the box instructions (no printed manual is included). I could not easily determine how to operate the release even though there are two numbered arrows on the part. It did not seem to do anything. Then I tried tightening the blade as if it had been used for a difficult job. The operation of the collar became clear as it released the saw just enough to be able to remove it by hand. Nothing very noticeable happens, and that fooled me into thinking nothing was happening at all. Just try it, it will work for you. The mandrel for the larger saws works in an obvious manner. Release the pins, screw down the saw by hand, and then engage the pins into the holes in the saw blade. Most of the holes I made were using the 1" blade and none of the material was left stuck inside the blades. So none required "prying" them out. Inside the case, in a small compartment below one of the mandrels, is a kit of 2 spare bits, 2 set screws and an Allen wrench. The case is sturdy and has two nice metal latches to hold it closed securely. The case hinge has a metal pin for strength and will not wear away like some plastic "flex" hinges. I made sure that all of the blades were the correct sizes, so did not have the same issue as "MockUpGuy" Summary: Nice blade set. Good mandrels that are easy to use without any special tools. Sturdy well-designed case.
Date published: 2015-07-15
Rated 4 out of 5 by from These work very well. The small case makes it easy to store and carry around on the jobsite. All the common sizes you need.
Date published: 2016-03-01
Rated 5 out of 5 by from Hole saw I like the quick change for hole saw changes with no tools needed. cut is excellent
Date published: 2016-02-10
Rated 5 out of 5 by from Exceptional The kit comes in a hard plastic tool box, with metal clasps, inside you'll find the 11 hole saws with a diagram that shows placement. Putting on the hole saws couldn't be simpler, tool free. Check to see which mandrel will fit the holesaw, the bigger the holesaw you will use the mandrel with the locking pins, needs 1/2” drill. I found in using this mandrel the brushed chrome piece fits perfectly in the web in the palm between the index figure and thumb, push down while threading the holesaw until tight and the pins are secure in the holesaw. Not being a contractor with an arsenal of tools I stumble through certain projects, let me be honest, most projects. One being in remodeling the kitchen. The plumbing comes up thru the basement where a pre-existing hole existed in the sub-floor but holes had to be drilled through the base of the cabinet and in a few other sections. Made one hole for the supply and another for the drain. The Dewalt hole saw performed perfectly, sharp and precise with the pilot hole drill bit.
Date published: 2015-07-09
  • y_2017, m_3, d_25, h_6
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_9
  • loc_, sid_203261579, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 29ms