Model # SL-6026-WH

Internet #100654956

Defiant Motion-Activated Lamp Sockets Control


Motion-Activated Lamp Sockets Control

$60.09 /each

Frequently Bought Together

Product Overview

This Heath Zenith Motion-Activated Lamp Sockets Control changes an existing floodlight into a motion-activated floodlight without wiring. It detects motion up to 70 ft. away and turns on the lights for your choice of 1 or 5 minutes.

  • Plastic material
  • Sockets are compatible with medium-base incandescent bulbs, 150-Watt maximum
  • Adds motion security to most non-motion lights
  • Sensor detects motion up to 70 ft. away in a 180° angle
  • Choose between day-and-night or night-only operation
  • Selectable light timer allows for either 1 or 5 minutes of light after motion stops
  • To install, simply attach sockets to your existing floodlights and place the wireless motion sensor within 100 ft. of the sockets




Warranty / Certifications

More Products With These Features


Customer Questions & Answers

does this work with CFL/LED lamps?

Asked by: SK
Yes, this item will work with CFL/LED lamps.
Answered by: CommunityAnswer
Date published: 2015-10-15

will sockets activate inside can fixtur

Can I install sockets in ceiling can fixtures and mount sensor in front of elevator doors to activate sockets when they open
Asked by: vesper
The product is not recommended for that type of use with ceiling can fixtures.
Answered by: HeathCo
Date published: 2016-02-16

can these be installed in ceiling can light fixtures?

Asked by: vesper
The product is not recommended with ceiling can fixtures. The ceiling can may not allow proper airflow around the sockets as well as it may reduce signal strength from sensor.
Answered by: HeathCo
Date published: 2016-02-16

can I get 1 of the sockets

Heath Zenith Motion-Activated Lamp Sockets Control SL-6026-WH
Asked by: Anonymous
Hello Valued Home Depot Customer, Thanks for your question and interest in this item. More information is needed to accurately answer your question. Please contact our Online Customer Service Department at 800-430-3376 to get more assistance with this item. Our hours of operation are between 6:00 a.m. and 2:00 a.m. Eastern Time daily. Thanks.
Answered by: Anonymous
Date published: 2015-10-15
  • y_2017, m_2, d_25, h_3CST
  • bvseo_bulk, prod_bvqa, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_5
  • loc_, sid_100654956, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 59ms

Customer Reviews

Motion-Activated Lamp Sockets Control is rated 3.3 out of 5 by 12.
Rated 4 out of 5 by from Performs Perfectly After Persistence I have purchased other Heath products in the past, so this particular kit filled my need as far as design and function concept goes. The instructions are straightforward, however, after installing the socket receivers, they would not respond reliably to the motion sensor transmitter located line of sight 15 feet away. The lights would sporadically go on and then not go off. I was on the verge of returning the kit when I decided to change the dipswitch positions on the three pieces (the two light sockets and the motion detector). With all switches moved to the opposing (up) position, the components communicate perfectly. I've selected the 1 minute on-time and the LED bulbs I have go on and off reliably and the meet my need perfectly.
Date published: 2015-07-07
Rated 1 out of 5 by from should've read reviews first before i bought... DEAR HOME DEPOT: Why do you even care to carry such product? This product deserves no star at all. It just didn't work at all. What a waste of time & money. The only good thing was it seemed to work when I was installing it. I hope other customers are aware of this.
Date published: 2012-09-04
Rated 2 out of 5 by from It didn't fit I was very dissappointed that it did not fit the screw threads of my floodlight...It would have been a good item..Made well and simple to install. But.....It does not fit all floodlights as stated on the box. I had to return it.
Date published: 2012-03-06
Rated 1 out of 5 by from Buy Something else.. Purchased this because I have the light on the upper corner of my house beyond where motion would be easliy detectable from that height, so went with this unit. Unfortunately it doesn't work and all reviews on the internet say the same thing.. it just stays on all night. The manufacturer's website attempts to blame it on several things, all of which I've systematically ruled out. I'm an engineer by trade and if I can't make it work.. you probably won't either.
Date published: 2012-03-21
Rated 1 out of 5 by from Great for a month then stopped working installed it in my garage; it controlled two incandescents, managed to see both the door to the house and the outside door [25 ft apart]. Worked for about 2 months. then stopped turning on.
Date published: 2009-07-05
Rated 5 out of 5 by from Worked for years Had this product for years, lights would stay on when batteries needed to be replaced. Just recently lights stayed on even after replacing batteries. Went to buy a replacement in the store, only to find out have to purchase online. That is a disappointment.
Date published: 2015-12-16
Rated 4 out of 5 by from Cheap Alternative to Installing New Fixtures Works as described. The sockets are quite large and may not fit in your light fixture. Doesnt work with LED light bulbs. The LED light bulbs will flicker when they are supposed to be off. Easy to install.
Date published: 2013-08-03
Rated 5 out of 5 by from Use them in outside door lights. Had to modify the the door light slightly because the adapter will make the light bulb sit lower and cause the bulb to stick outside of the light housing. The adapter is wide, so it may not fit in your current door light. I had to take the lamp apart to make it fit, but it fit very well and looks fine when lamp is back together. Motion works great and they both turn on. I would change default dip switch codes on adapters and motion sensor. I have only had this product since 1/7/12, but so far I really like it!
Date published: 2012-01-09
  • y_2017, m_2, d_24, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_12
  • loc_, sid_100654956, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 109ms