Model # 36-5000

Internet #205404743

Delta 15 Amp 10 in. Left Tilt Contractor Saw with 30 in. Right Hand Rip, Steel Wings and Rolling Stand
0847962005281

Delta

15 Amp 10 in. Left Tilt Contractor Saw with 30 in. Right Hand Rip, Steel Wings and Rolling Stand

$795.68 /each

Frequently Bought Together

Product Overview

The Delta 10 in. Contractor Saw features an industry standard tool-free split guard design that allows a true rise-and fall riving knife by using a lever on the inside of the throat plate. There is tool-less assembly of riving knife and anti-kickback pawls. The Blade Brake stops the blade within seconds of the power being turned off. There is a quick assembly stand with fewer parts, which allows fast assembly.

  • Unique tubular stand for maximum support and stability
  • Ease of mobility with 2 fixed wheels and 1 swivel wheel
  • Cast iron tabletop with 1-LH and 2-RH stamped steel extension wings
  • Heavy duty 1-piece rail system for precision cuts every time
  • Blade guard system included
  • Equipped with a lock out power switch

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Compare Similar

Price
$795.68 /each
$799.00 /each
$1,199.99 /each
$1,599.00 /each
Name 15 Amp 10 in. Left Tilt Contractor Saw with 30 in. Right Hand Rip, Steel Wings and Rolling Stand 15 Amp 10 in. Job Site Table Saw with Guard Detect and Rolling Stand 1.75 HP 10 in. Proshop Table Saw with Riving Knife, 115/230-Volt, JPS-10TS 12 Amp 10 in. Industrial Table Saw with Heavy-Duty Portable Stand
Brand Delta DEWALT JET General International
Ratings (6) (4) (5) (0)
Power Tool Features Blade Guard System,Lockout Power Switch,Stand Included Blade Guard System,Stand Included Blade Guard System,Stand Included Stand Included
Blade Diameter 10 10 10 in 10 in
Rip Capacity - Right 30 33.5 30 in 30 in
Table Length (in.) 27 26.25 27 20
Table Width (in.) 50 22 44 25.25
Bench or Stationary Stationary Bench Stationary Bench
View Product View Product View Product View Product

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

Is this saw direct drive or belt driven ?

Asked by: Kenny1965
It's a belt driven saw. Very quiet, actually. Best to rewire it to ~220v.
Answered by: Galushenko
Date published: 2017-01-02

15 amp motor

Is the 15 amp the start up amperage or does the motor run at 15 amp continuously? If so, will it trip a 15 amp circuit breaker?
Asked by: cloe
Works fine on a 15 amp. breaker even under heavy load.
Answered by: cloe
Date published: 2017-02-01

will the saw accept a dado blade

Asked by: pentuphere
Yes, it will accept dados. You will have to buy the dado insert plate, that will be another ~$55. The motor harbor is not too big. Therefore, 1/2 is the most of your dados... you might be able to get 5/8 on it but it will feel bad. If I would be looking for a table saw with~$1200 spending limit today, I would definitely consider Foxshop or Grizzlly hybrid models. You will get more options with way better saw for $200-$300 less. Oh! Do try to call Delta customer service, BEFORE you buy anything.... Did you call them?:) Now, just picture that your Delta saw needs parts/service.... Hm-m-m... Do you see what I am talking about?
Answered by: edZik
Date published: 2017-03-19

What is the difference between the Model # 36-5000 and # 36-5100?

Asked by: Scott
The 5100 model has cast iron extension wings and the 5000 has steel.
Answered by: CommunityAnswer
Date published: 2016-09-12
  • y_2017, m_3, d_20, h_14CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_9
  • loc_, sid_205404743, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 101ms
  • QUESTIONS, PRODUCT

Customer Reviews

15 Amp 10 in. Left Tilt Contractor Saw with 30 in. Right Hand Rip, Steel Wings and Rolling Stand is rated 2.2 out of 5 by 6.
Rated 1 out of 5 by from DO NOT BUY this table saw! I am a home improvement contractor. I've purchased Delta table saw for... DO NOT BUY this table saw! I am a home improvement contractor. I've purchased Delta table saw for my contractor's work and you know what....? It was at the repair shop for over 70 days during the first year now and I have no idea when it will be repaired! So, what would you do in my case? You've spent over of $1200 for a tool and that tool undergoes over a 70-days repair (it is still at the repair facility and I have no idea when it will be repaired). Well, I just had to buy another table saw for my work. You know what? There are several very good table saws in the same price range, manufactured in US and backed up with a great warranty. Thus, there is no need to buy Delta for your shop! It is a very sad story when we observe what has happened to Delta power tools over the last several years, and this change is very, very dramatic. From a legendary quality tools it dropped to a low quality designed/build power equipment. The last, but not least thing. Terrible, terrible, terrible customer service!!!!! Before you buy any tool from Delta, just try to reach their customer service by phone..... I am an expert on this matter now. If you were able to reach Delta customer service within or less than in 20 minutes of waiting period
Date published: 2017-01-28
Rated 1 out of 5 by from New Delta is a sad joke. Motor failed after 3 cuts. Called Delta Service and waited on hold for an hour with no answer. Called Delta Sales and they picked up immediately. When asked why I couldn't get through to support, the salesperson claimed "We just moved locations and we didn't bring any support staff with us, so there's nobody to answer your call." I'm dumping this saw and buying one from a real company. Old Delta was amazing. New Delta is a terrible joke. Don't waste your money.
Date published: 2016-08-15
Rated 1 out of 5 by from Customer Service from Delta Nonexistent First, let me say that I've purchased many products over the years that did not impress me but I've never been irritated enough to take the time out of my day to write a negative review. This is my first. And, to be fair, let me also clarify that this review pertains more to customer service than the saw itself- the saw doesn't blow me away with its power but it is smooth and accurate and generally adequate for the modest price. So, here's my gripe. I needed a couple small parts. One of which was my fault- I nicked the edge of the fence with the blade. The other was the fence cam and fence handle which literally broke one day when I attempted to lock the fence into place. Delta has a pretty web sit with a nice diagram of the saw with part numbers, etc.. So I ordered the aluminum fence tube, received an e-mail confirmation of my order showing that it had been billed to my credit car, and now, a month later, I have not received the fence tube. I tried to contact Delta to follow up on my order and to order the cam and fence handle and they cannot be reached. Literally, you will be on hold all day and no one will ever pick up the phone. I have tried numerous times. Delta's web site now says its on line store is experiencing technical difficulties and its outgoing voicemail says they are moving they're north American headquarters so there may be delays in customer service. This is an understatement. Customer service is not delayed- it's nonexistent. I contacted one of the local Delta service centers here in Cincinnati to see if I could get some assistance and the comment made by the service tech was a resigned "that company's just not what it used to be." So, bottom line, if you're buying this product with the expectation that Delta, another formerly proud American company, will back its product then I would look elsewhere. Very disappointed
Date published: 2016-04-28
Rated 1 out of 5 by from Lemon or poor design Initially the saw preformed well. However after a few months , maybe 100-150 on/off cycles, the starter windings burned out. Since it was past 90 days of purchase I couldn't return it to H-D. The nearest certified Delta repair site put a "new" motor in the saw. The rebuild was poor, the miter slot blade alignment is off by 1/8". The alignment procedure provided by delta doesn't allow this much movement. Delta tech support can not offer suggestions to correct the problem. Their best suggestion is to take to another authorized Delta repair shop. My suggestion is to avoid this saw.
Date published: 2015-11-05
Rated 4 out of 5 by from Confused but happy. Upon assembly, the instructions lacked in detail. The angle iron has extra holes and caused confusion while assembling table extensions and measurements bar. Some holes on side plates, were not the correct size, and holes did not align to intended threaded holes the frame. I was able to use the screws and wedge the screws into the holes, securing the plates. I feel the alignment of the table extensions was a pain, and could have been helped by lower tolerances in the machining of the holes in the extension plates. Once assembled, worked great. I have made a few cuts and Intend to use it extensively in the near future. Blade alignment seems to be excellent, out of the box. Fence is awesome, miter is nice. I will add another review after I have given it some real use.
Date published: 2015-06-29
Rated 5 out of 5 by from Great Product After some initial assembly issues, the saw works great. Delta technical personnel were very helpful and resolved my problem quickly. Home Depot was great in offering to help me with the Manufacturer if needed. Both Home Depot and Delta were great providing support.
Date published: 2014-10-26
  • y_2017, m_3, d_21, h_2
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_6
  • loc_, sid_205404743, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 17ms
  • REVIEWS, PRODUCT