Model # DR64100

Internet #100660703

Store SKU #747209

Store SO SKU #315129

Diablo 3/8 in. x 1/4 in. Carbide Flush Trimmer Router Bit
0008925077145

Diablo

3/8 in. x 1/4 in. Carbide Flush Trimmer Router Bit

  • Solid micrograin carbide for extended cutting life
  • Self-piloting reduces expense and upkeep of ball bearing assembly
  • Cuts plastic laminate quickly and cleanly
$9.97 /each

Frequently Bought Together

Product Overview

The Diablo 3/8 in. x 1/4 in. Carbide Flush Trimmer Router Bit provides a safe, controlled cut and is ideal for laminates. Crafted from solid carbide for durability, the bit is computer balanced for less vibration and chatter.

  • Requires a minimum chuck size of 1/4 in.
  • Provides a safe, controlled cut and is ideal for laminates
  • Solid carbide
  • Kick-back reducing design
  • Tri-metal brazing for impact resistance

Specifications

Dimensions

Details

More Products With These Features

Search

Customer Questions & Answers

1 Question1 Answer

Customer Questions & Answers

3/8 in. x 1/4 in. Carbide Flush Trimmer Router Bit
3/8 in. x 1/4 in. Carbide Flush Trimmer Router Bit

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
 
1 answer

router marks the laminate

This question is from 3/8 in. x 1/4 in. Carbide Flush Trimmer Router Bit
Asked by
West Hollywood
Read all my Q&A
December 1, 2014
the head of the trimmer is marking the laminate when used, what am I doing wrong
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

December 8, 2014
Answer: 
Below are a couple reasons why the trimmer could be marking the laminate:
- If it is a bearing, it could be loaded up with glue and jammed so it is not rotating.
- Whether bearing or pilot, if there is glue on the guide surface, this can mark the laminate.
- If the edge is not square to the surface being routed, or the router is tilted for some reason, this can cause the edge of the bearing to make a
Read More
Below are a couple reasons why the trimmer could be marking the laminate:
- If it is a bearing, it could be loaded up with glue and jammed so it is not rotating.
- Whether bearing or pilot, if there is glue on the guide surface, this can mark the laminate.
- If the edge is not square to the surface being routed, or the router is tilted for some reason, this can cause the edge of the bearing to make a mark on the laminate.
In our experience routing laminates, the best course is always to:
- Lubricate the laminate edges with wax before routing.
- Keep the bearings or pilots clean, and keep bearings lubricated.
Read Less
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
1 of 1
  • 2016-10-31 T16:31:22.983-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_100660703, prod, sort_default
1 of 1
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 19ms
  • QUESTIONS, PRODUCT

Customer Reviews

3/8 in. x 1/4 in. Carbide Flush Trimmer Router Bit is rated 3.6 out of 5 by 5.
Rated 5 out of 5 by from Works great Works great and stays sharp. I would highly recommend this product to my friends.
Date published: 2012-06-19
Rated 4 out of 5 by from Purchase that was needed This tool performed like I expected it to do. Nice smooth cut.
Date published: 2015-11-23
Rated 3 out of 5 by from Not what I really needed This product I was told by sales person would work on cutting out outlet cuts in fiberglass panel used for backsplash. Could not figure what way to go with the router as it would not cut. it would melt the panel. Probably should have used a carbide blade with a saber saw.
Date published: 2015-03-10
Rated 5 out of 5 by from Flush Router Bit This worked out better than I thought and the bit is quite durable, simple to apply to the wooden edge. The bit does get heat as should be expected but it last for several projects as I never needed to replace it despite the heavy use. Great product.
Date published: 2015-06-16
Rated 1 out of 5 by from Faulty Must have been manufactured wrong. Had to lean on the router to slowly trim through standard mica. Never experienced this before. Must have been a bad one. Will return.
Date published: 2014-10-18
  • y_2017, m_1, d_19, h_1
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_5
  • loc_, sid_100660703, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 17ms
  • REVIEWS, PRODUCT