0084691194651

GE

Model WX17X10001DS

Internet #202212328

Store SKU #354846

Store SO SKU #354846

Anti-Vibration Pads (4-Piece)

$33.00 /each

Frequently Bought Together

Product Overview

The GE Anti-Vibration Pads reduce the noise and vibration generated by your washing machine. The bottom treads grip the floor, ensuring stability. The pads fit most front-load washers and are safe for all types of floors.

  • Material is engineered to reduce noise and vibration
  • Pads fit under the corners of washing machine
  • For use with most major brands
  • Genuine GE part

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

7 Questions17 Answers

Customer Questions & Answers

Anti-Vibration Pads (4-Piece)
Anti-Vibration Pads (4-Piece)

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
This question is from Anti-Vibration Pads (4-Piece)
 
6 answers

Do these pads only work with front loaders or will they work with traditional top load washing machines as well?

This question is from Anti-Vibration Pads (4-Piece)
Asked by
Ryan
Houston
August 20, 2013
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (6)

Asked by
Richmond, VA
Read all my Q&A
August 11, 2015
Answer: 
I have a top loading machine. With these pads in place, my washing machine actually wobbled more and had a tendency to walk across the floor. I eventually had to remove the pads.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Colorado
Read all my Q&A
August 19, 2014
Answer: 
They work with both ... they mount under the legs and help stop vibration in any type of unit
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Read all my Q&A
May 6, 2014
Answer: 
Mine's toploading. The question is whether it has four feet.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Granby, CT
Read all my Q&A
January 30, 2014
Answer: 
They will work with any washing machine as long as they have feet.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Read all my Q&A
September 17, 2013
Answer: 
I think they would work on any machine. They have a recessed area on top for the machine fit to sit into so they don't slide off. They are very solid, so I think they would support any machine. I have only used them on the front loading machines I have.
+3points
3out of 3found this answer helpful.
Was this helpful?helpful3unhelpful0

September 12, 2013
Answer: 
Hi Ryan, I contacted GE to make sure that this product will work on top load washers. GE stated yes they can work on top load washers.
+2points
2out of 2found this answer helpful.
Was this helpful?helpful2unhelpful0
This question is from Anti-Vibration Pads (4-Piece)
 
5 answers

I have whirlpool front loader

This question is from Anti-Vibration Pads (4-Piece)
Asked by
sissy
Axton, VA, USA
February 16, 2013
I would like to know if these would work on my front loader that has the extra drawer unit under or would it off balance the drawer unit and cause it to bend .I love the drawer units under my washer and dryer for storage but the washer does make noise .I tried cheaper pads I bought at home depot that were for heavy furniture 5 years ago .They slide nice to clean around and under washer and dryer but they do not stop the vibration noise .Can you still move the washer and dry with these under the legs or is it hard to move them .I see they look like a foam or rubber and being the cut vibration I would think the would make them hard to move
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (5)

Asked by
Marietta GA
Read all my Q&A
January 6, 2015
Answer: 
Yes, in fact pretty much the only way to keep the machine from shaking itself to death.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Read all my Q&A
May 6, 2014
Answer: 
Don't count on these feet sliding on the floor, e.g. like Magic Sliders. They're made to hold an appliance like a washer that can thrash badly, in place, without beating the floor to death with its feet.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Granby, CT
Read all my Q&A
January 30, 2014
Answer: 
I have a pedestal drawer as well. You would need to level the unit after it is placed on the pads. You can move the machine slightly, but remember that these pads are designed for the machine NOT to move. The washer will still vibrate (they ALL do) but the energy from the vibration will be absorbed by the pads and not shake the house.
To level the machine, you will need to remove the drawer (2 Screws
Read More
I have a pedestal drawer as well. You would need to level the unit after it is placed on the pads. You can move the machine slightly, but remember that these pads are designed for the machine NOT to move. The washer will still vibrate (they ALL do) but the energy from the vibration will be absorbed by the pads and not shake the house.
To level the machine, you will need to remove the drawer (2 Screws near the face, 1 on each side) to gain access to the leveling feet. Just twist the top nut of the leveling feet and reinstall the drawer.
It may seem like a pain but should take 20 minutes tops.
Read Less
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Read all my Q&A
September 17, 2013
Answer: 
I think they would work under the drawer units. They have a recess in the top for the feet to sit in, which I assume your drawer pedestals have.
They are solid rubber, surprisingly heavy. Not foam-like at all. More like several layers of car tire. They do not slide when there is weight on them. To get them under the back feet I had the machine in place, tipped it forward and pushed the supports under Read More
I think they would work under the drawer units. They have a recess in the top for the feet to sit in, which I assume your drawer pedestals have.
They are solid rubber, surprisingly heavy. Not foam-like at all. More like several layers of car tire. They do not slide when there is weight on them. To get them under the back feet I had the machine in place, tipped it forward and pushed the supports under the feet with a broom handle.
They stop the vibration, but it is not easy to move the machines once they are on these dampers. Read Less
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Read all my Q&A
February 17, 2013
Answer: 
Hello Sissy,
This is Donna with GE and I am happy to assist you.
You can certainly try the GE 4-piece Anti-Vibration Pads, but I would recommend to check with the manfuacture of the washer to see it is ok or tested with their pedestal or storage drawer. It is possible it may only be recommended if the frontload wahser is not on a pedestal.
I hope this helps!
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
This question is from Anti-Vibration Pads (4-Piece)
 
3 answers

Does it work for stacking units?

This question is from Anti-Vibration Pads (4-Piece)
Asked by
Baltimore, MD
Read all my Q&A
December 19, 2013
What is the weight capacity for these pads? Are they okay to use when my washer and dryer are stacked on top of each other?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (3)

Asked by
Read all my Q&A
May 6, 2014
Answer: 
Should be--they're pretty hard and stiff, moreso than I'd like for a washer, actually.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

January 30, 2014
Answer: 
Yes, it will work for stacking units as well.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Atlanta, GA
Read all my Q&A
January 20, 2014
Answer: 
Hi Adababy,
Thanks for your question and interest in this item. More information is needed to accurately answer your question. Please contact our Online Customer Service Department at 800-430-3376 to get more assistance with this item. Our hours of operation are between 6:00 a.m. and 2:00 a.m. Eastern Time daily
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
This question is from Anti-Vibration Pads (4-Piece)
 
2 answers

I have an RV and currently we get strong vibrations through out, will they work in an RV

This question is from Anti-Vibration Pads (4-Piece)
Asked by
Palm City, Fl
Read all my Q&A
August 22, 2015
Just curios as I have to do something
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

Asked by
Read all my Q&A
August 26, 2015
Answer: 
Hello John, This is Joyce from GE Appliances. These pads will in fact reduce the vibration being transmitted from the source (machine) to the floor, but they will not stop the vibration at the source. If your washer, is vibrating excessively, or abnormally, then the cause of the vibration should be found and fixed. Thanks so much for checking with us. Have a good day!
2 days ago
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Richmond, VA
Read all my Q&A
August 24, 2015
Answer: 
These pads will reduce the vibration being transmitted from the source (machine) to the floor, but they will not stop the vibration at the source. If your machine, be it a washing machine or something else, is vibrating excessively, or abnormally, then the cause of the vibration should be found and fixed.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
2 »
  • 2016-08-28 T15:24:39.750-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_202212328, prod, sort_default
2 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 108ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 3.7 out of 5 by 50 reviewers.
Rated 1.0 out of 5.0 by Doesn't work I ordered these upon the recommendation of a Home Depot representative. My washing machine was moving around, and it wasn't out of balance. When these were put on, the washing machine moved around move than ever. When the repairman came out, he said to never use these, because they do not work. August 23, 2016
Rated 4.0 out of 5.0 by PADS Cant be used for stacking. This is for Side by side only August 2, 2016
Rated 5.0 out of 5.0 by They work great They stop the washer from moving around, use them on washer and dryer so they were the same height. June 21, 2016
Rated 5.0 out of 5.0 by Solved a problem My new front load machine , was causing so many problems, shaking a traveling all over the floor, until I found this product on the Home Depot web site, the true is that iI had my doubts because some of the reviews were negative, but I decided to try it and I'm a happy customer ! Is not easy to install for a single person and the half inch recess on the pads , are a most only a 3/16, a factor that made the installation more difficult, but after a leveled the machine and put the pads on place, all the problems stooped like magic ! April 15, 2016
Rated 5.0 out of 5.0 by Right pad for the job My washer was bouncing all over the place due to the high spin velocity. I put these pads on and the washer stays where I want it. Highly recommended moment these for all walking washers December 15, 2015
Rated 2.0 out of 5.0 by Pro-Vibration Pads I set these pads under the legs of my washing machine. The machine actually wobbled more with the pads than without. In addition it had a tendency to walk across the floor. I eventually had to remove the pads. However, with the pads in place, there was probably less vibration transmitted to the floor, which was the only good feature. The pads are thick and durable, so I'll probably find some use for them down the road. They would probably work well under a machine with a constant harmonic frequency vibration, such as a refrigerator or air compressor. August 11, 2015
Rated 1.0 out of 5.0 by Waste of money Increases vibration! Washer is more stable on level floor/ these rubber blocks are very unstable. October 13, 2015
Rated 1.0 out of 5.0 by Does Not Prevent washing machine movement The pads were installed on the washing machine according to the instructions and when the machine went into a (moderate) spin cycle the machine moved to the point that it had to be held and the power turned off. A major part of the problem is the washing machine design. It is a front loader and it seems that the machine manufacturers can't seem to correct this problem. Their idea of a fix is pouring some concrete in the area of the front portion of the machine housing. You might suggest the manufacturers build the machine so it can be attached to the floor or they come up with a counter weight to prevent the movement. NOTE: When launderettes came into being the front loader Bendix washers were anchored to the floor. February 17, 2015
  • 2016-08-28 T14:58:07.496-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_50, tr_50
  • loc_en_US, sid_202212328, prod, sort_default
2 3 >>
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 47ms
  • REVIEWS, PRODUCT