Rated 2.5 out of 5 by 6
Rated 3.0 out of 5.0 by DIYer ok... LEAKS but fixable
The set seems nice and well crafted however after installing you run into the problems..
the center handle which controls the nozzle or diverts the water flow around the bidet LEAKS EVERYWHERE.. my solution is to LIBERALLY apply plumbers putty on both sides of the handle(top and bottom part of the bidet). Also on the bottom there is a rubber gasket...metal washer.. and then the nut.. apply plumbers putty to both sides of that rubber gasket.. between the bidet ceramic and between the washer which will compress it. Also apply plumbers tape to the thread or it will leak from the nut.
The next spot where it will leak a lot is the drain.. the gasket is poor and does not compress properly.. solution is if you can plumbers putty if not use some caulking adhesive like it tells you to do on the top of the drain. Also remember to apply tape to the threaded portion of the drain pipe.
Other than the leaky issue which can be solved (hopefully) with lots of plumbers putty and tape my only other concern is that the securing nuts are rather flimsy and larger nuts would offer a more secure installation and make this a much better set.
As for the nozzle spray it appears weak because it falls on itself, once the water makes contact with something it goes much higher.
Unfortunately had to take it apart about 3 times now... 1 hour job turned into 6...
July 30, 2016
Rated 1.0 out of 5.0 by Eileen Not good poor quality
Poor quality planning to return the second one I just bought
August 17, 2016
Rated 4.0 out of 5.0 by ad666 Good for the price
I wanted to install this bidet on a low budget so I went with this set and it seems well made. The instructions are clear and even a novice like me can do well. The things to notice are the following:
The back-flow valve is right under the spout and that is important. Do not omit.
There is a rubber gasket funnel-shaped at intake side of the Y below the dual function valve. Because of the rim in the Y and the thinness of the gasket, it may be sucked into the intake tubing thus blocking all flow. I did not install it and it truly does not serve any purpose where it is. My advise is: don't use it.
May 1, 2010
Rated 1.0 out of 5.0 by tintin Broken!!!!
After buying a different brand and having missing parts i decided to buy this faucet. It looks nice!. The plumber finished the installation (after two hours). When the water was turn on...we realized that one of the parts was faulty because it started leaking :-(. He tried almost anything to to fix it but nothing worked. By the way uninstalling it takes even longer.
October 4, 2011
Rated 1.0 out of 5.0 by Raja It leaks
Plumber tried 3 times and still leaks, leaks and leaks
July 10, 2013
Rated 5.0 out of 5.0 by HSHOBX Beautiful hardware.
This looks great and works exactly as designed with great water pressure, etc.
April 26, 2013