Model # YG204-WH

Internet #100630902

Hampton Bay Hawkins 44 in. White Ceiling Fan
0792145351955

Discontinued Hampton Bay

Hawkins 44 in. White Ceiling Fan

  • Five blades, white and bleached oak, reversible
  • Light kit adaptable
  • Flush mount

Frequently Bought Together

Product Overview

Ideal for rooms with low ceilings, the Hampton Bay Hawkins 44 in. White Ceiling Fan features a flush-mount design and a twist-and-lock installation method for easy installation and concealing hardware. The Bracket Set system helps make installation fast and offers wobble-free, quiet operation. The fan comes with five reversible white and bleached oak blades and a white finish that is compatible with a wide variety of decor styles.

California residents: see   Proposition 65 information

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

90 Questions198 Answers

Customer Questions & Answers

Hawkins 44 in. White Ceiling Fan
Hawkins 44 in. White Ceiling Fan

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
 
0 answers

Can I get a shade replacement for this fan?

This question is from Hawkins 44 in. Brushed Nickel Ceiling Fan
Asked by
Read all my Q&A
October 30, 2016
Can I get a shade replacement for this fan?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0
 
1 answer

Wireing diagram for pull cord light switch

This question is from Hawkins 44 in. Brushed Nickel Ceiling Fan
Asked by
Read all my Q&A
October 1, 2016
Example: I have looked at the manual and can't figure out what I did wrong.
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

October 18, 2016
Answer: 
Please call customer care for assistance. If lights are not turning on, check that the blue wire on the TOP of the MOTOR is connected to a HOT Wire(BLACK & BLUE Fan wire to our House BLACK WIRE). 1-877-902-5588
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
1 answer

LED Bulbs?

This question is from Hawkins 44 in. Tarnished Bronze Ceiling Fan
Asked by
Read all my Q&A
June 24, 2016
Has anyone been able to find an LED light bulb that fits in this fan?
So far, all the options I have tried are too large and are preventing the installation of the glass cover.
Any recommendations for a manufacturer and model would be much appreciated.
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

June 27, 2016
Answer: 
No compatible LED for this model fan.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
3 answers

Pull-chain won't turn lights off anymore. How do I fix it?

This question is from Hawkins 44 in. Brushed Nickel Ceiling Fan
Asked by
Southampton, PA
Read all my Q&A
June 20, 2016
Worked fine for 2 yrs. Now it felt like it pulled too far and light won't turn off by chain -everything else works fine.
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (3)

June 23, 2016
Answer: 
The light switch is not replaceable on this model, you will need to replace the entire light kit unit. Please call customer care at 1-877-902-5588 for assistance.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
south Texas
Read all my Q&A
Home Improvement Profile: DIYer
June 22, 2016
Answer: 
You need to replace the switch Dan. Our HD here stocks them. 46.9 FM
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Kansas
Read all my Q&A
Home Improvement Profile: DIYer
June 22, 2016
Answer: 
The pull chain switch needs to be replaced. You can order the replacement light kit, Hampton Bay item 206118304, for around fifteen dollars, or fix it yourself with a higher quality chain switch for about ten bucks. This is a fairly straightforward repair if you are comfortable with electrical. If you installed the fan yourself originally, you'll have no problems with this.
- Purchase this replacement Read More
The pull chain switch needs to be replaced. You can order the replacement light kit, Hampton Bay item 206118304, for around fifteen dollars, or fix it yourself with a higher quality chain switch for about ten bucks. This is a fairly straightforward repair if you are comfortable with electrical. If you installed the fan yourself originally, you'll have no problems with this.
- Purchase this replacement switch: Gardner Bender Model # GSW-31
- Purchase some lamp thread extenders such as Westinghouse Model # 7015000
- Purchase one thread coupling such as Westinghouse Model # 7016200
- If you don't already have them, purchase a few small orange wire nuts.
- Turn off electric to the circuit that serves the fan and light
- Remove the glass shade covering the light bulbs
- Remove bulbs
- Remove the entire light kit. There are I believe three screws holding it to the fan body, and a couple of wires that plug into the main fan body.
- Now that you have the light kit by itself, unscrew the little cup shaped thing where the pull chain for the light comes out. I think it's held on by a little nut recessed way down in the cup.
- The switch itself should be free to pull out of the bottom of the light kit now. Snip the two wires going to the switch right where they exit the switch.
- Strip about 1/2" of insulation off the wires you cut from the old switch. Fasten those to the new switch using wire nuts.
- Put the threads from the new switch through the bottom of the light kit and through that cup-thingy, and fasten it together with the original nut.
- I believe the threads coming off of the new switch are not as long as the old ones were. At this point, use the coupling you bought to fasten a section of the new thread adapters onto the end of the threads coming out of the new switch so that it closely matches the length of the original switch threads (I hope that makes sense).
- From here on, assembly is the reverse of removal.
Good luck! Read Less
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
2 3 4 5 6 »
  • 2016-10-31 T01:55:26.278-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_100630902, prod, sort_default
2 3 4 5 6 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 63ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 3.8 out of 5 by 565 reviewers.
Rated 5.0 out of 5.0 by great fan very simple to install , Just like falling off a log , light weight , if you have any ability at all you can do this September 22, 2015
Rated 5.0 out of 5.0 by Love this ceiling fan! It's very quiet! We have a drop ceiling in our basement which is a bit lower than the overhead floor joists. Normal ceiling electrical boxes wouldn't work on a project such as this so we modified the framing lower between the 2 joists equally necessary to accommodate the ceiling tile. It was challenging but successfully accomplished! We couldn't be more pleased as we had to do this type of installation 3X, also for our flush mount Alabaster light fixture and our Westinghouse Contempra Trio 42" ceiling fan over the kitchen island. June 20, 2015
Rated 3.0 out of 5.0 by Decent quality for the money Bought this fan to install into my daughter's bedroom. Simple to install, the hooks to hold the motor in place is a nice simple feature when installing. The one minor complaint I have when it comes to installation, is I wish they would ship it in the on position. Took me a bit to figure out why it had power (checked via multimeter) but the fan would not turn on. Wife asked if I had tried different speeds. Once I pulled the chain it worked perfectly. The fan noise is noticeable, but tolerable. Actually works well as just white noise. If you want complete silence this is not the fan for you. I will say I did try a Lutron Caseta dimmer switch on this fan and they are not compatible. The same type of dimmer works fine on my other ceiling fan. February 24, 2016
Rated 4.0 out of 5.0 by Quite and efficient Fan works well and the sturdy mounting bracket eliminates any vibration. The only problem I had installing the fan was the cover for the motor. The cover would not side onto the pins on the mounting bracket. I don't know if this is just a bad cover where the slots didn't line up with the pins. I had to drill two threaded holes in the cover for screws to hold the cover tight to the bracket. September 28, 2013
Rated 5.0 out of 5.0 by Ceiling fan Assembly and installation were easy. Fan is very quite and does an excellent job of circulating air. June 11, 2014
Rated 5.0 out of 5.0 by Easy To me it was so easy to install. Price is right, looks fine and very quiet. Hoped to come with longer switch string. August 28, 2012
Rated 5.0 out of 5.0 by Great clean looking fan Needed a lightless fan for the kitchen to move air around during cooking. This was perfect and easy to install. February 23, 2016
Rated 5.0 out of 5.0 by Really great ceiling fan. We got this fan at a really reasonable price (clearance I think). We were pleasantly surprised at how nice it is considering how inexpensive it was. We had no problem with the installation and it works perfectly, very quiet. It's perfect for the room and we're extremely happy. February 10, 2016
  • 2016-10-31 T00:22:12.186-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_565, tr_565
  • loc_en_US, sid_100630902, prod, sort_default
2 3 4 5  ... 20 >>
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 56ms
  • REVIEWS, PRODUCT