Rated 2.3 out of 5 by 104
Rated 3.0 out of 5.0 by 1918Remodel Works better than the paint on versions
I previously did a bathtub and tile wall paint with the brush on version a few years back and needed to do some touch up on my tile walls. Overall, this product worked better than the brush on version, but there were some draw backs. First ensure you use a respirator when painting. The fumes will be all everywhere and you don't want to breathe them in. Secondly, the room needs to be extremely well ventilated and make sure you cover everything because the paint will get on any uncovered area with a thin film of stickiness. If you can follow those two rules the job will come out nice. The paint is more of a off white than bright white, but still looks great.
April 26, 2016
Rated 1.0 out of 5.0 by DSmith Very Poor Product with Poor Results
This is a review from a real customer. I purchased this product last weekend because the local Home Depot was carrying only this brand. I used it the same day. The instructions did not specify that everything in your bathroom will be covered with epoxy mist including your hair, arms, eyelids, everything. Results were poor: no gloss ( live in NM practically no humidity), the can was spraying blobs (even though I cleaned the nozzle all the time between each break in spraying), drippings everywhere. I am switching to another product in order to finish the job. If I can give this product "0" I would. Do not use, you will end up like me, no shower but in a need of a wash immediately.
August 8, 2016
Rated 1.0 out of 5.0 by Shay Not White, Lots of Drips!
I wish I read the reviews before buying this product!!! My bathroom is white and gray, and after finishing the tub, I realized that this "white" is more beige. Also, it dries VERY quickly after being sprayed, which is great except for the fact that the cans dripped like crazy, making it hard to clean up the spots because of the quick drying. I followed ALL directions and wiped the nozzle after every few sprays. It was ridiculous. Lots of time and money spent using this, then buying a different product to re-do it 4 days later.
August 10, 2016
Rated 1.0 out of 5.0 by Tjplp01 Does not work
Do not buy. Waist of time and money. I applied this to my tub and left it for 7 days to dry when I went on vacation. It looked great. 2 weeks later and the paint is all worn and rubbing off just from standing on it.
August 16, 2016
Rated 3.0 out of 5.0 by DEstefan Works well, BUT ...
I used the "WHITE TOUGH AS TILE ONE PART EPOXY AEROSOL" to spray my ugly shower pan. The product was relatively easy to use and it looks good when done.
But there is a big BUT:
Do NOT use a dust mask, use a proper respirator.
Also spent some time on covering everything in the room and close all doors, and open a window. The very fine mist will cover anything with fine epoxy spray that you haven't protected before.
March 6, 2016
Rated 4.0 out of 5.0 by Zigger Looks nice haven't used the bath yet
The tub looks very nice the fumes were a little strong .but easy to spray...just mask all around
July 27, 2016
Rated 5.0 out of 5.0 by JAF Excellent Product
Prior to purchasing I read all the reviews and I was a bit apprehensive but decided to use the product anyway. Given that I am a contractor I was even more apprehensive because I have to stand behind my work, and if it didn't do what it said, it was money and time down the drain, times two because I had to do a tub/surround and a shower unit. My customer was very particular so I knew it had to be perfect. And it was. Here's what made it work for me:
1: Prep. I went above and beyond the instructions. First I washed the entire surface with denatured alcohol then with bleach. Then I scraped the entire surface with a thin blade razor, and wiped it all down with the alcohol again. The shower floor was pitted for traction and it had built up residue from years of use. So I had to do the floor several times. Then I sanded the entire surface with 400 grit paper, washed it down with the TSP, then sanded again, followed by another TSP wash/rinse. Next I used the 000 steel wool (supplied), followed by another TSP wash/rinse, and then hit it with a tack cloth, twice. Total prep time - 4 hours for tub and surround.
2. Spraying: It is a very thin product so the best method is to spray a thin coat in an area then immediately go back over it until you have good coverage for your first coat. I did the walls of the surround first and the floor of the tub and shower last as the over spray from the walls did a good job covering the floor.
3. After two coats the finish was too much of a satin finish. I waited 4 days and lowered the temp and relative humidity down to about 70. Prior to painting I went over the entire unit with the steel wool and TSP process, then tacked it. The finish was perfect.
Overall I used two kits for the shower floor/surround and two for the tub/surround. Had the humidity been right from the start, I could have saved on the 4th kit.
July 27, 2016
Rated 5.0 out of 5.0 by Reese Homax Tough as Tile
Great product, it worked very well. Instructions were very easy to follow.
July 14, 2016