Model # 8815

Internet #204318367

House of Fara 5/8 in. x 7-1/4 in. x 96 in. MDF Primed Base Moulding
0043559088150

House of Fara

5/8 in. x 7-1/4 in. x 96 in. MDF Primed Base Moulding

$1788 /each

Frequently Bought Together

Product Overview

The House of Fara 5/8 in. x 7-1/4 in. x 8 ft. MDF Primed Base Moulding will add a clean smooth colonial look to any room. It's constructed from primed MDF and is ready for painting to match your existing decor. This extremely wide profile baseboard moulding is economical and will add a unique detail and an architectural touch to any room or project.

California residents: see   Proposition 65 information

  • Primed MDF base moulding
  • Clean smooth colonial look
  • Extremely wide profile
  • Economical and adds unique detail

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

hi, is the price shown per sq foot?

hi, is the price shown per sq foot?
Asked by: james
Hi james, the price is shown as each. We appreciate your business and look forward to serving you in the future. Thank you for shopping Home Depot!
Answered by: THDSupport
Date published: 2016-12-28

Are longer lenghts available?

Prefer not to splice boards together, is there lengths of 12' - 14' - 16' etc.?
Asked by: mlk
Thank you for your recent inquiry with The Home Depot, MLK. Unfortunately this particular moulding is not available in a longer piece. We appreciate your business and look forward to serving you in the future. Thank you for shopping Home Depot.
Answered by: THDSupport
Date published: 2016-06-10
  • y_2017, m_6, d_27, h_13CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_2
  • loc_, sid_204318367, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 27ms
  • QUESTIONS, PRODUCT

Customer Reviews

5/8 in. x 7-1/4 in. x 96 in. MDF Primed Base Moulding is rated 4.8 out of 5 by 4.
Rated 5 out of 5 by from Obviously it is not hardwood, it is MDF. For... Obviously it is not hardwood, it is MDF. For the money and the width and detail of the molding, it fits perfectly in an older home with similar width base moldings.
Date published: 2017-05-16
Rated 5 out of 5 by from some scuffs and breaks on some of the ends. ... some scuffs and breaks on some of the ends. read a review where it said to
Date published: 2017-04-22
Rated 4 out of 5 by from These look beautiful. No discrepancies between pieces. These look beautiful. No discrepancies between pieces.
Date published: 2017-02-07
Rated 5 out of 5 by from Good product. No issue I like the design and height. Hard to fine stock baseboards this high in one piece. Doing this with separate pieces will cost 4x the amount. As a DIY homeowner, I found this product just as good if not better than finger joint pine boards. All boards are perfectly straight. The boards are only 8 feet - longer boards require less cuts. I found that shipping caused damage to the ends. About 1 in 8 had a problem with them, usually a dent in the top at some point NOT at the end, which essentially means the board can only used for short runs. Several had a dent in the very end, but that was easy to cut off. When you get to pick your boards yourself, you don't have to worry about this. Also, I recommend buying in batches of 8, as I think that is how many fit in a standard box. If the box is full, they won't slide around and damage themselves. I have ordered about 35 boards in several shipments for the first floor and basement. I used 5.25 contractor pack finger jointed pine boards (stock at HD) for the second floor. A note for those considering 7.25 inch boards - you will need a sliding miter saw or maybe a 12 inch blade (maybe). With boards this high, you cannot point them up along the fence as they are too high. And laying flat, a 10 inch blade does not cut the entire length. Without a slider, you will need 2 cuts for every board. And if your saw does not bevel on BOTH sides, you cannot cut the board at a 45 degree angle. Moreover, if you do not have the right saw, I don't see how it is possible to do a quality job. I ended up buying a Rigid 10 in slider (which is awesome BTW). Lastly, with so many contours in the board, you must have quality cuts to make the boards line up. If your floors (or cuts) are off, then it will be substantially harder to make the boards line up. I underestimated how difficult this would be when I purchased these boards. Finally, with so many contours in the board, it is requires more effort to dust them. Just keep that in mind...
Date published: 2015-02-25
  • y_2017, m_6, d_27, h_2
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_4
  • loc_, sid_204318367, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 51ms
  • REVIEWS, PRODUCT