Model # 85-332

Internet #202276264

Store SKU #575491

Ideal 2.4 GHz 2-Way Digital Splitter
0783250853328

Ideal

2.4 GHz 2-Way Digital Splitter

$6.37 /each

Frequently Bought Together

Product Overview

High performance 2.4 GHz Digital Splitters are used for splitting a single coax line into 2, 3 or 4 lines. These splitters are designed for applications that operate in the 5 MHz to 2.4 GHz range, which include: Satellite, Digital/HD Cable TV, Broadcast (over the air) TV, CCTV and other general purpose coaxial cable splitting requirements. All ports on the 2.4 GHz splitters are power pass enabled. This allows any of the ports to be used to pass power from the satellite set top box to the satellite dish or multi-switch. All splitters include an internal printed circuit board design inside of a nickel plated zinc die cast housing which helps to improve overall splitter performance in return loss, insertion loss and port-to-port isolation measurements, resulting in a stronger, cleaner signal with more protection from outside signal interference. All 2.4 GHz splitters have a solid, sealed body for improved EMI/RFI performance and a standoff design which allows cables to be routed behind the splitter for tight installations. Machine formed threads on the F ports allow for smooth connector mating. Splitters include a grounding screw port for attaching ground wires and two user accessible mounting holes.

California residents: see   Proposition 65 information

  • Use to split a signal 2 ways
  • Nickel-plated housing
  • F-type connections
  • Pair of grounding screws eliminate the need for a grounding block
  • Use terminators (85-038) on all unused ports for optimal performance
  • EMI/RFI shielding effectiveness -80dB
  • Balanced printed circuit board design for high-performance
  • Insertion loss 8dB to 12dB over rated frequency range
  • For 75Ω coaxial cable systems
  • Click here for more information on Electronic Recycling Programs

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

3 Questions5 Answers

Customer Questions & Answers

2.4 GHz 2-Way Splitter
2.4 GHz 2-Way Splitter

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
This question is from 2.4 GHz 2-Way Splitter
 
2 answers

What splitter do I need to connect to a antenna?

This question is from 2.4 GHz 2-Way Splitter
Asked by
Houston Tx
Read all my Q&A
September 28, 2015
I am done with Dish and want to reconnect my TV's to my antenna in the attic. I have two TV's to reconnect and need a splitter to connect both. I need to know which splitter is best for this?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

Asked by
Read all my Q&A
May 2, 2016
Answer: 
dk this splitter should work for you or a standard 1 GHz splitter. I don't know how far you are from the broadcast antenna or how strong a signal you are receiving. Just keep in mind the two way splitter will cut the signal strength in half to feed both TV's. In most cases you should be OK. Ron at ron.kipper@idealindustries.com
+2points
2out of 2found this answer helpful.
Was this helpful?helpful2unhelpful0

January 16, 2016
Answer: 
This splitter will work fine for connecting your over-the-air antenna to two TVs.
+2points
2out of 2found this answer helpful.
Was this helpful?helpful2unhelpful0
This question is from 2.4 GHz 2-Way Splitter
 
2 answers

What do I look for in a splitter?

This question is from 2.4 GHz 2-Way Splitter
Asked by
Arizona
Read all my Q&A
November 20, 2014
What is the difference between an expensive vs cheap model?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

Asked by
Read all my Q&A
May 3, 2016
Answer: 
sudsy typically a 1 GHz should work for most CATV applications, the splitter should also be bidirectional so signals can pass both ways through it. Buying a 2.4 GHz
+2points
2out of 2found this answer helpful.
Was this helpful?helpful2unhelpful0

Asked by
Chicago, IL
Read all my Q&A
Home Improvement Profile: DIYer
September 11, 2015
Answer: 
More expensive splitters split up to 2.4GHZ others only 1GHZ. Most people do not need a 2.4ghz splitter, but you don't know if you do unless you can look at the frequency of splitters the cable company already installed in your home. 2.4ghz will work with all cable tv applications 1 ghz may not. There's also a signal loss rating with each splitter you may have to consider if you have a weak signal.
+9points
9out of 9found this answer helpful.
Was this helpful?helpful9unhelpful0
This question is from 2.4 GHz 2-Way Splitter
 
1 answer

is this MOCA campatable

This question is from 2.4 GHz 2-Way Splitter
Asked by
Connecticut
Read all my Q&A
March 17, 2016
is this MOCA campatable
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

Asked by
Read all my Q&A
March 18, 2016
Answer: 
tmack my product manager says they are MOCA compatible. Let me know if you have any issues with using the splitters. Thanks Ron ron.kipper@idealindustries.com
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
1 of 1
  • 2016-10-31 T00:54:54.803-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_202276264, prod, sort_default
1 of 1
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 45ms
  • QUESTIONS, PRODUCT

Customer Reviews

2.4 GHz 2-Way Digital Splitter is rated 3.8 out of 5 by 5.
Rated 5 out of 5 by from This splitter worked great for me. I live in an apartment so running another coax cable to my of... This splitter worked great for me. I live in an apartment so running another coax cable to my office was out. Seeing the cable from my masterbedroom was directly on the other side of the wall where I wanted to place the tv in my office. I simply drilled through the drywall into the next room and split the cable that was in my bedroom. I was a little concerned about signal degradation, but it all worked out great. Now I dont know if this splitter is meant for in-wall use but, it has been in the wall feeding 2 separate cable boxes for a while now with absolutely no problems. It was a cheap and simple solution to my problem
Date published: 2016-12-09
Rated 5 out of 5 by from Worked as intended My client needed a 2-way split to feed Cox Cable TV and her Cox Cable Modem - this splitter worked great.
Date published: 2011-12-20
Rated 5 out of 5 by from Crystal Clear HD picture Great Picture. Extremely sharp picture. Signal improved markedly.
Date published: 2014-05-17
Rated 3 out of 5 by from BEV_HD It didn't work for Bell HD because you would need 2 for an HD signal. HD picture requires two lines coming from the stat dish. I will try this guy on Shaw Direct and will let you know if it works.
Date published: 2012-08-11
Rated 1 out of 5 by from This product does not work on Bell ExpressVu High definition signal.
Date published: 2012-03-29
  • y_2017, m_1, d_16, h_17
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_5
  • loc_, sid_202276264, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 39ms
  • REVIEWS, PRODUCT