Model # C10

Internet #202059078

Store SKU #451136

Legrand Wiremold CordMate Channel, White
0086698880247

Legrand Wiremold

CordMate Channel, White

  • Quick, clean way to hide a single cord or cable
  • Easy install with self-adhesive backing, no screws needed
  • Highly rated for design, install, and value (see reviews)
$457 /each

Frequently Bought Together

Product Overview

Conceal a Low-Voltage cable or wire with this Cord mate Channel. The self-adhesive backing helps make installation easy. Single piece construction made of durable PVC.

  • Helps protect cord
  • 5 ft. L
  • Paintable/stainable
  • Full compliment of fittings available
  • Note: product may vary by store

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

how long is item?

Asked by: Anonymous
C1 (Ivory) and C10 (white) cord channels are 5 feet long.
Answered by: WeekendWarrior
Date published: 2017-01-12

Do you feed the cord through the device or does it open to allow you to place the cord inside of it?

How would you fit an extension cord through?
Asked by: Jef
The cord channel does have one side open and it "clicks" shut once you have the wire inside. Beware, though, that the slit is pretty narrow (takes some effort to pry it open to get the cord in) and it takes A LOT of pressure to snap it shut.
Answered by: WeekendWarrior
Date published: 2017-01-12

does this item have adhesive back to stick to the wall?

Asked by: Anonymous
Yes, it does, and it`s pretty strong, so once you put it in place, it`s there to stay, depending on what surface you plan to put in on.
Answered by: Jackofsometrades
Date published: 2017-04-07

once cord is inside and snapped in place, can it be easily unsnapped if cord needs to be removed?

once cord is inside and snapped in place, can it be easily unsnapped if cord needs to be removed?
Asked by: bluesgene
Only if you purchase a Cogswell Cogs cord release unhinge.
Answered by: Whodat
Date published: 2017-06-11
  • y_2017, m_6, d_27, h_1CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_33
  • loc_, sid_202059078, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 15ms
  • QUESTIONS, PRODUCT

Customer Reviews

CordMate Channel, White is rated 4.6 out of 5 by 18.
Rated 2 out of 5 by from This comment applies to Cordmate C1/C10 (cord cover) and C6/C16 (90-degree flat elbow), but may a... This comment applies to Cordmate C1/C10 (cord cover) and C6/C16 (90-degree flat elbow), but may also apply to the other Cordmate connectors: Product mostly performs "as advertised" but there is a design flaw. The elbow does not positively "click" into place over the cord cover as you would expect. It just sort of stays on tentatively by friction. Called Legrand support and the customer service rep was courteous, but did not have an explanation or resolution. He tested this with his samples and agreed that it didn't work as he thought it should -- i.e., he expected it to click into place, too. He only could suggest putting a spot of glue on the inside of each leg of the elbow to hold it more securely. Just beware that in installations where the elbow/connector may get bumped, it will likely fall off unless you glue (or double-stick tape) it on to the cord cover.
Date published: 2017-01-11
Rated 5 out of 5 by from Easy to cut to size with utility knife and install. Can be "tacked down" and repositioned if nece... Easy to cut to size with utility knife and install. Can be "tacked down" and repositioned if necessary without damaging paint if a light touch is used with the adhesive backing. Snapping the cover closed can be hard on fingers and thumbs - gloves recommended. Inconspicuous and takes paint readily.
Date published: 2017-03-28
Rated 5 out of 5 by from They work I purchased these years ago, and they're still up in my living room. So I needed some more for my husband's man cave. They last a long time and do the trick to hide wires, in my case, surround sound.
Date published: 2017-04-07
Rated 5 out of 5 by from I bought a new home, and the home builders left the garage door sensor wiring, just hanging there... I bought a new home, and the home builders left the garage door sensor wiring, just hanging there in plain site. The Cord Mate Channel come out looking even better than I expected!
Date published: 2017-04-24
Rated 5 out of 5 by from Pain in the butt to get the wire in there, because the plastic isn't very flexible. But at the en... Pain in the butt to get the wire in there, because the plastic isn't very flexible. But at the end of the day you only have to do it once, and the product works great.
Date published: 2017-06-08
Rated 4 out of 5 by from Good for the price It is probably designed to sit along the baseboard. If you use the adhesive on the wall it will fall within a day or two. I used two #2 screws to mount each section to the wall. First drill a hole with a small bit on each end of the channel, then run your wire through and use the adhesive to hold it in place, then use the screws to mount it. For the price against a white wall or edging it's perfect.
Date published: 2012-08-01
Rated 5 out of 5 by from Great product when you do not want to hardwire. Wonderful invention! Wanted a light in kitchen in a dark corner. Got on Home Depot on line. Picked out a beautiful vanity light and the Cord Mate. Made a 5 x 7 x 1 1/2" box and lid. Secured box to wall with dry wall fasteners and screws. Painted Cord Mate and box to match wall paint. Cut an extension core and wired to new light. Drilled hole for mounting screw and put light up. Drilled hole in bottom middle of box and brought extension cord through it. Plugged in remote control. Hit the switch and I have the most beautiful light coming through the kitchen. Cord Mate made it complete instead of ugly cord hanging down. Get creative, use imagination and go to Home Depot. I love my new light and the Cord Mate made it look even better.
Date published: 2014-07-25
Rated 5 out of 5 by from Great product that serves its purpose well I needed to contain the wires going to my rear surround speakers. With the way my entertainment center and furniture are configured to "see" each other, the only way those wires could run was on the floor along the threshold below my front door. I installed this conduit and it worked out perfect, and actually looks good, too. The conduit halves were hard to snap shut, given how stiff the material is. You either need strong fingers or a pair of pliers, but once it`s closed, it`s closed for good. The adhesive is very strong, so once I put it down on my tile floor, it was there to stay. My only regret is I wished I had looked into this sooner, but I got it done now!
Date published: 2014-11-16
  • y_2017, m_6, d_27, h_3
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_18
  • loc_, sid_202059078, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 20ms
  • REVIEWS, PRODUCT