Lithonia Lighting 1-Light White Fluorescent Strip Light-MNS8 1 32 120 RE M6 - The Home Depot

Lithonia Lighting

Model # MNS8 1 32 120 RE M6

Internet # 202563408

Store SKU # 491796

1-Light White Fluorescent Strip Light

Lithonia Lighting 1-Light White Fluorescent Strip Light

This item has been discontinued.
The Home Depot no longer carries this specific product.

$22.92 / each


Model # MNS8 1 32 120 RE M6

Internet # 202563408

Store SKU # 491796

The Lithonia Lighting 1-Light White Strip Light is a non-hooded, 48 in. strip fixture for a single 32-watt fluorescent bulb. Mounting hardware is included, a bulb is not.

  • Non-hooded 48 in. white fixture
  • Uses a single 32 watt T8 fluorescent bulb (not included)
  • UL listed
  • Hardware included


Assembled Depth (in.)  48.375 in  Assembled Height (in.)  2.75 in 
Assembled Width (in.)  1.625 in  Length/circumference (in.)  48 
Actual Color Temperature (K)  Bulb(s) Included  No 
Collection Name  Lithonia Lighting  Color Rendering Index 
Commercial Light Type  Strip  Dimmable  No 
Fixture Color/Finish  White  Fixture Color/Finish Family  White 
Hardware Included  Yes  Hooded  No 
Light Bulb Base Code  Other  Number of Bulbs Required 
Product Weight (lb.)  4 lb  Required bulb type  T8 
Returnable  90-Day  Wattage (watts)  32 
Wrap cover/lens included  No 
Warranty / Certifications
Certifications and Listings  1-UL Listed  ENERGY STAR Certified  Yes 
Manufacturer Warranty  1 year 


Rated 4.7 out of 5 by 7 reviewers.
Rated 5 out of 5 by great purchase as it is a lot brighter Would recommend to any one to give them a try as it is a great product. December 10, 2014
Rated 5 out of 5 by Nice light, easy installation I purchased 3 of these to replace my old fluorescent lights mounted on the ceiling above my cupboards. Having read all the reviews I used an arbor press to punch the top knockouts (I am a girl after all so I look for easy alternatives to muscle). Just a little wiggling with pliers and they came out clean and easy. I cut one long side of the box they came in and, using the fixture as a guide, marked the center holes and keyholes on the cardboard to create a template. I taped the cardboard template to the ceiling and drilled my holes. I installed a toggle bolt into each hole, connected the wires and slid the fixture onto the toggle bolts using the keyholes. A few turns on the bolts snugged the fixture to the ceiling. The covers were then snapped in place and a new bulb was installed. Total time to remove the old fixtures and install my new ones was about 50 minutes. The lights come on instantly and my kitchen is so much brighter. Very nice lights and straightforward installation. July 31, 2014
Rated 4 out of 5 by economical T8 Fixture small and easy to mount, but if you need to punch out the ends to run wire, that is very difficult. The punchouts are not stamped through and you wind up struggling. April 22, 2014
Rated 4 out of 5 by NICE FOR THE MONEY The product seems well thought out and nicely made, with enough paint to last it's life of use. I purchased 4 for the barn ceiling and am satisfied of value for the money. Only complaint was the difficulty of removing the knockouts without damaging the fixture. Other than that, much joy. January 24, 2014
Rated 5 out of 5 by Good product The strips are well constructed and the ballasts are quiet. The only problem is that the electrical punch-outs are very difficult to open; I had to cut some out with a rotary cut-off tool. October 13, 2013
2 >>


Standard Shipping includes delivery by small parcel service. Processing time varies by product.

Orders for this item may be expedited for an additional fee.

Other Delivery Options:

Express and Expedited shipping options are also available. Estimated arrival times are available in checkout.

If product is eligible for shipping to AK, HI and US Territories additional transit time and remote surcharges may apply.