Model # MSCL-OP153MH-WH

Internet #203821815

Store SKU #675507

Lutron Maestro 150-Watt Single-Pole/3-Way CFL-LED Dimmer with Occupancy Sensing - White
0784276055154

Lutron

Maestro 150-Watt Single-Pole/3-Way CFL-LED Dimmer with Occupancy Sensing - White

  • Auto on to a favorite dimmed level then auto off when you leave
  • Detects fine motion 2-3x's better than other sensors
  • Provides best dimming performance for LED bulbs
$34.97 /each

Frequently Bought Together

Product Overview

Coordinating Claro wall plate and accessories sold separately. Let Lutron Maestro CFL/LED Occupancy Sensing Dimmers turn the lights on and off to your favorite level. It's a simple, easy, and low cost way to save energy and add light automation to your home. Install a Maestro Occupancy Sensing Dimmer and lights turn on when you enter the room, and then turn off automatically after you leave. The dimmer works just like a Lutron Maestro dimmer, gradually turning lights on and off, allowing your eyes to adjust to the new light level. Use the rocker to adjust the light level for any activity, or set the preset level to ensure lights always turn on to your desired light level. Equipped with ambient light detection, you can customize your sensing dimmer to detect daylight so lights don't turn on with enough natural light in your room. Keeping the sleek design of the Maestro family, Lutron sensors will match the decor of any room in your home. Install it in the laundry room for added convenience when your hands are full, or in the kids' rooms and never worry about lights being left on by mistake. Maestro Occupancy Sensing dimmers work with any bulb type, including dimmable CFLs and dimmable LEDs. This occupancy sensing dimmer can also be easily programmed to function as a vacancy (manual-on) sensor.

  • Coordinating Claro wall plate and accessories sold separately
  • Multi-location, single pole or 3-way
  • Up to 600-Watt of incandescent or halogen, 150-Watt of dimmable CFL or dimmable LED
  • Works with mixed loads of bulbs
  • Automatically turn lights on and off based on room occupancy
  • Uses advanced XCT sensing technology, offering the most reliable on/off performance up to 30 ft.
  • Senses daylight, so lights don’t turn on inadvertently (optional)
  • Can be switched to vacancy mode (manual-on, auto off)
  • Programmable time-out of lights - 1, 5, 15 or 30 minutes
  • Programmable fade times for lights turning on and off - allows lights to come on and/or turn off gradually
  • Easily program the preset to automatically turn on the lights to your favorite level
  • Coordinating claro wall plates and accessories sold separately
  • Click here for more information on Electronic Recycling Programs

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

what is the companion 3 way occupancy sensor switch to use with MSCL-OP153MH? Thanks!

I have installed Lutron dimmer occupancy sensor MSCL-OP153MH, and I want to add companion sensor switch... what is the companion 3 way occupancy sensor switch to use with MSCL-OP153MH? Thanks!
Asked by: Anonymous
If you want sensors at two different spots on the same circuit, it cannot be done with this particular model. You can control it from other locations using the MA-R companion dimmer, or even wire it to a conventional switch for multi-location control, but no motion sensing. Lutron does make other models that will sense from multiple locations; you might want to call them for further guidance.
Answered by: haef
Date published: 2016-09-15

Auto-on and dimmer setting

If I set the dimmer to 30% and Auto-On, and someone walks in front will the light go to 100% or 30%?
Asked by: George
Sebastian's answer is not correct, and Lutron apparently didn't read the question. The auto-on "occupancy" feature will fade up lights from off to either a level pre-determined by your programming of it, or whatever level the occupants last used. If the lights are already on, either because of the motion sensor or manual activation, the motion sensor will only detect people gone and turn off the lights. Summary: It cannot automatically fade between two different ON levels based on motion.
Answered by: haef
Date published: 2017-02-20

Is there a bypass/manual override mode to deactivate the motion sensor so it would act as a regular dimmer switch?

Asked by: Keen
Kindof. You can manually switch it on or off, but if on, the motion sensor will eventually turn it off if there is no motion. If you turned it off, eventually it will turn back on if there is motion. There is a separate bypass switch to shut it clear off with no motion sensing whatsoever.
Answered by: haef
Date published: 2016-09-14

What is the difference between the MSCL-OP153M and the MSCL-OP153MH?

They seam to be very similar.
Asked by: Tommy
I believe it is simply the retail packaging. Otherwise, the exact same dimmer.
Answered by: haef
Date published: 2016-09-12
  • y_2017, m_3, d_20, h_16CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_16
  • loc_, sid_203821815, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 15ms
  • QUESTIONS, PRODUCT

Customer Reviews

Maestro 150-Watt Single-Pole/3-Way CFL-LED Dimmer with Occupancy Sensing - White is rated 4.3 out of 5 by 52.
Rated 5 out of 5 by from These sensors are great but take a college degree to... These sensors are great but take a college degree to figure out. They are overly sensitive and pick us up at least 20 ft away. If you accidentally touch the light switch upon entering a room, it will then not work. So if you read and memorize the manual, and train yourself, these sensors are great
Date published: 2017-01-24
Rated 5 out of 5 by from I bought this to replace a sensor-only switch. I love having the added dimmer feature. My old sen... I bought this to replace a sensor-only switch. I love having the added dimmer feature. My old sensor had that clicking relay & abrupt full-on/off. This Lutron is quiet, with fade-on & fade-off. Great quality!
Date published: 2017-02-07
Rated 5 out of 5 by from works great. dimmer range is adjustable to our needs. occupation sensor is great for spaces wher... works great. dimmer range is adjustable to our needs. occupation sensor is great for spaces where you may have your hands full, like an entry way from the garage.
Date published: 2016-12-13
Rated 5 out of 5 by from Excellent .... And easy to install, especially for me who is all thumbs!! Excellent .... And easy to install, especially for me who is all thumbs!!
Date published: 2016-11-01
Rated 5 out of 5 by from Excellent product Has several configurable settings for brightness and dimming.
Date published: 2017-02-21
Rated 5 out of 5 by from As described Works great! I love it! Easy to install and easy to set up.
Date published: 2016-12-20
Rated 5 out of 5 by from Chicago Worked great. Easy to install and set up. Would buy again.
Date published: 2016-09-27
Rated 5 out of 5 by from It worked well. Directions were some what confusing!... It worked well. Directions were some what confusing!
Date published: 2017-03-01
  • y_2017, m_3, d_21, h_4
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_52
  • loc_, sid_203821815, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 19ms
  • REVIEWS, PRODUCT