Model # 49-56-9652

Internet #202327765

Store SKU #232877

Milwaukee 5 in. Hole Dozer Hole Saw
0045242198597

Milwaukee

5 in. Hole Dozer Hole Saw

  • Rip Guard, the strongest tooth form in the industry
  • 8% cobalt construction for increased wear resistance
  • Plug Jack, an all access slot design for fast plug removal
$3797 /each

Frequently Bought Together

Product Overview

Bi-metal tooth construction on the Milwaukee 5 in. Hole Dozer Hole Saw features a robust composition of steel and 8% cobalt that is backed by a Rip Guard lifetime limited warranty against breakage for ultimate cutting performance and confidence. This hole saw drill attachment is fashioned with innovative Plug Jack diagonal slots that allow easy removal of plugged material, allowing work to proceed at a steady clip.

  • Durable bi-metal construction features 8% cobalt for increased wear resistance
  • Steel-reinforced teeth are covered by a lifetime limited rip guard warranty against breakage
  • Fashioned with all-access diagonal plug jack slots for fast removal of plugged material
  • Use with separately sold Milwaukee quick-change arbors (models 49-56-7210, 49-56-7240, 49-56-7250, 49-56-9100)

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

More Products With These Features

Search

Customer Questions & Answers

Can it saw cement ?

Asked by: tony
No I wouldn't think so.
Answered by: Doc
Date published: 2017-04-11

Does this hole saw cut sheet metal?

Asked by: FloridaSon
yes
Answered by: Jack
Date published: 2017-05-15

i need to drill through porcelin floor tile

Asked by: tony
No, would take a special saw for porcelin.
Answered by: Flash
Date published: 2017-03-07

Will this hole saw cut through 1/2" plywood? If not, what type hole saw will I need?

Asked by: Lar1
Yes it will cut through 1/2" plywood, but no more than 1-1/4".
Answered by: sawdust
Date published: 2016-08-01
  • y_2017, m_5, d_19, h_10CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_66
  • loc_, sid_202327765, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 27ms
  • QUESTIONS, PRODUCT

Customer Reviews

5 in. Hole Dozer Hole Saw is rated 4.1 out of 5 by 426.
Rated 5 out of 5 by from The hole saw did what it was designed for I bored 10 holes in 3\4 thick cast iron plates with on... The hole saw did what it was designed for I bored 10 holes in 3\4 thick cast iron plates with only one hole saw I completed the job under the estimated time which equals profit They are good for those who know feeds and speed run them a slow rpm and they will last many jobs down the road
Date published: 2016-12-20
Rated 5 out of 5 by from Bored 20 holes in 1/4" steel plate and this saw is as sharp after the last as it was on the first... Bored 20 holes in 1/4" steel plate and this saw is as sharp after the last as it was on the first. Used plenty of cutting oil, enough pressure to produce continuous chips, and 250 rpm speed on my drill press. Holes are clean and round. All this and a lifetime tooth breakage warranty? Very impressive and highly recommended.
Date published: 2017-01-25
Rated 3 out of 5 by from not very happy with this one .. vey dull after drilling about 7 holes. but would still buy again... not very happy with this one .. vey dull after drilling about 7 holes. but would still buy again . most of the time they a great.
Date published: 2016-12-29
Rated 5 out of 5 by from Cuts through 1/4" plate steel with no problem. Made 20... Cuts through 1/4" plate steel with no problem. Made 20 hole cuts with no duling of the blade, so I give it an Excellent rating.
Date published: 2017-03-28
Rated 5 out of 5 by from Great for stainless steel ... Great for stainless steel
Date published: 2017-04-21
Rated 2 out of 5 by from I bought the 4" hole saw in order to install nine, 4 inch round ceiling electrical boxes. The cei... I bought the 4" hole saw in order to install nine, 4 inch round ceiling electrical boxes. The ceiling is 1/2" gypsum blue board with a veneer plaster sand swirl finish skim coat. The first three holes went fine, but I noticed the teeth were dulling at an alarming rate. By the time I got to the seventh hole, the teeth had completely worn away, and I had to "cut" new teeth into it using a Dremel tool and a an small stone. I realize that this hole saw is only meant for wood and steel, and I'm sure that the 1/8" veneer plaster is what dulled it, (once it got through the veneer plaster it cut like butter) but I was surprised at how quickly the teeth wore away considering that it was dulled by the fourth hole.
Date published: 2017-05-15
Rated 1 out of 5 by from This is a complete waste of money! I purchased this exact size from Harbor freight in a 3 pack wi... This is a complete waste of money! I purchased this exact size from Harbor freight in a 3 pack with variable sizes which is $10 less than this bit by itself. The generic bit made 5 recessed lighting holes with ease through lathe and plaster. I assumed if I spent a little more money it would get one that lasted longer and cut faster. I was completely wrong! This bit went dull after cutting two holes and I even pre-drilled the holes with the dull cheap bit to avoid the lathe from eating the teeth. I am sure this is good for cutting balsa wood at best.
Date published: 2017-03-03
Rated 5 out of 5 by from I used this with a quick change center drill bit arbor from Milwaukee and this was an excellent h... I used this with a quick change center drill bit arbor from Milwaukee and this was an excellent hole saw through my roof for a new attic fan vent. Makita 18V LXT 1/2 drill in higher torque mode was sufficient to cut through without flaw or trouble, maintaining light pressure and letting the saw do the work. A heavier duty drill would have provided even more torque, and with a handle mounted I think this saw would have drilled through quite rapidly. Excellent quality, excellent performance.
Date published: 2017-01-10
  • y_2017, m_5, d_22, h_23
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_426
  • loc_, sid_202327765, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 58ms
  • REVIEWS, PRODUCT