Model # 584-1200HC

Internet #100540481

Store SKU #166469

Mueller Streamline 3/4 in. x 10 ft. Black Steel Pipe

Mueller Streamline

3/4 in. x 10 ft. Black Steel Pipe

  • For use with oil, gas, air and steam.
  • Meet with API 5L PSL1. and ASTM A53 Grade A.
  • Not for potable water
$17.59 /each

Frequently Bought Together

Product Overview

Black pipe is used for oil and gas applications only. Meets ASTM and ASME standards. Must be installed according to your local code.

California residents: see   Proposition 65 information

  • Protective varnish coating to prevent oxidation
  • Male threaded connection
  • Standard threaded pipe ends comply with ANSI B1.20.1
  • Standard pipe complies with ANSI/ASTM A733, A53
  • Note: Product may vary by store.




Warranty / Certifications

More Products With These Features


Customer Questions & Answers

can I get pipe cut

I need to have a10ft pipe cut in half and threaded? Can you do this?
Asked by: mickcindy
yes they will cut and thread one pipe but charge a very large price for anymore.
Answered by: mick
Date published: 2016-06-26

Can this be cut down and re-thread to length in store for me?

I need 8 ft. lengths rather than 10 ft. Can the store cut these to length and re-thread the ends?
Asked by: Brian
I just went to a home depot today. The cutting and threading is free, but they'll charge for purchasing the pipe per foot, instead of the price for a 10 foot pipe. The price of pipe 3/4" x 10' was about $14. If you want the pipe cut and threaded, they charge over $4/foot. Go to Lowes. They don't charge you by the foot if you have them cut/thread the pipe.
Answered by: NJHandygirl
Date published: 2017-03-08

is this threaded?

is this threaded?
Asked by: Seeezar
Yes, this pipe is threaded.
Answered by: CommunityAnswer
Date published: 2017-01-12

Can I get pipe cut sent to my home

Can I get pipe cut sent to my home
Asked by: Jp
Hi Jp, unfortunately for this 3/4 in. x 10 ft. Black Steel Pipe, if ordered on, will be shipped as it appears on We are not able to make changes to the product. We appreciate your business and look forward to serving you in the future. Thank you for shopping Home Depot!
Answered by: THDSupport
Date published: 2017-01-12
  • y_2017, m_4, d_23, h_23CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_13
  • loc_, sid_100540481, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 84ms

Customer Reviews

3/4 in. x 10 ft. Black Steel Pipe is rated 3.5 out of 5 by 4.
Rated 2 out of 5 by from It's great that Home Depot will cut pipe, but in both of my experiences, the order was communicat... It's great that Home Depot will cut pipe, but in both of my experiences, the order was communicated incorrectly and I showed up to find that nothing was ready. The associates promised a pickup time and the order was not filled by that time. Today it took 20 minutes to tell me that the order wasn't ready and 20 minutes to cut the pipe. Standing around in the store for 40 minutes was not the expectation that the associates set when taking the order. Make sure you call ahead and confirm that your order is ready before you show up at the store. Though you'll need to be ready to be on hold for awhile.
Date published: 2016-12-03
Rated 3 out of 5 by from Typical black pipe quality. The threaded ends of the pipe... Typical black pipe quality. The threaded ends of the pipe were over threaded with too many threads so it had to be shaved by about a 1/4" on each side with a sawzall. I guess it worked out since the pipe actually measured 10' and a half inch before cutting off some of the threads and 10' afterwards but this should not have been necessary.
Date published: 2017-01-25
Rated 4 out of 5 by from cutting and threading Needed pipe for pipe clamps. The first time I purchased the 10 foot pipe Home Depot cut the pipe into 4 sections and threaded at no additional charge. When I needed another one I was told the price for cutting the pipe increased the price per foot. The pipe original cost was 12.91 and was increased to to $4.50 per foot (That's $45 instead of $12.91 for three cuts and threads). Since I needed them for clamps I cut them in half with a hacksaw as I only need thread on one end. So, keep in mind you can still save considerably if you cut the 10 foot pipe but don't rely on home depot saving you any if you need more than 1 cut and the pipe threaded. I will also note this was the home depot in the Stroudsburg PA location. I couldn't tell you if other locations do not have this issue or not. I have read the recommendation to ask home depot to cut and thread this pipe as it's been done for others without charge as well. The product itself is what you'd expect so no issues there. There is no way to rate a service issue so it's been dropped one star.
Date published: 2014-07-22
Rated 5 out of 5 by from Great for pipe clamps! This pipe is sturdy and low cost, the perfect companion for 3/4" pipe clamps! The store employee even cut it in half and threaded both ends for me free of charge. Just make sure you keep the wood surface you're clamping from contacting the black pipe, since it will leave marks. I usually just place some shims between my workpiece and the pipes to keep them separated.
Date published: 2014-01-22
  • y_2017, m_4, d_24, h_4
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_4
  • loc_, sid_100540481, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 95ms