Model # 6-7006GLQ

Internet #202329538

Store SKU #593447

Store SO SKU #1000725931

QEP 7 in. Glass Tile Diamond Blade for Wet Tile Saws
0010306670067

QEP

7 in. Glass Tile Diamond Blade for Wet Tile Saws

$29.97 /each

Frequently Bought Together

Product Overview

Enjoy accurate cuts with the QEP 7 in. Glass Tile Diamond Blade for Wet Tile Saws. The blade features a diamond-coated cutting edge and a 7mm continuous rim for clean cuts in glass tile with minimal chipping. This blade is specifically engineered for cutting glass tile and therefore is not recommended for ceramic, porcelain, brick, paver, plastic, wood, metal and most natural stone products.

California residents: see   Proposition 65 information

  • Designed for use with a wet tile saw
  • For wet cutting at speeds up to 8,730 RPM
  • 5/8 in. arbor fits most brands of wet tile saws
  • Steel blade
  • 7mm diamond-coated cutting edge
  • 7mm continuous hi-rim
  • Cuts glass tile

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

12 Questions38 Answers

Customer Questions & Answers

7 in. Glass Tile Diamond Blade for Wet Tile Saws
7 in. Glass Tile Diamond Blade for Wet Tile Saws

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
 
7 answers

HOW MANY TILES WILL THIS CUT, WHAT'S ITS LIFE EXPECTANCY?

This question is from 7 in. Glass Tile Diamond Blade for Wet Tile Saws
Asked by
CHICAGO
Read all my Q&A
November 14, 2013
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (7)

Asked by
Colorado
Read all my Q&A
March 13, 2015
Answer: 
Depends how many cuts per tile you are doing but for the most part you can cut 50 to 100 tiles by the time it starts to wear out ...you will know as the blade will take longer to cut.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Philadelphia
Read all my Q&A
June 18, 2014
Answer: 
This blade will cut over 300 tiles.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Asked by
Nashville, TN, USA
Read all my Q&A
May 6, 2014
Answer: 
I'm sure it would depend on the size of the tiles, but I cut approximately 300-4inch tiles installing a back splash and the blade was still cutting as smooth as it did when I cut the first tile. It's a high quality blade.
User submitted photo
+7points
7out of 7found this answer helpful.
Was this helpful?helpful7unhelpful0

Asked by
Northern CT
Read all my Q&A
April 21, 2014
Answer: 
On 19 inch porcelain tile it lasted about 3 tiles before it was noticeably dull, but if you dress it with the QEP rubbing stone every few feet it will continue to cut like new.
-4points
0out of 4found this answer helpful.
Was this helpful?helpful0unhelpful4

Asked by
Destin, FL
Read all my Q&A
March 18, 2014
Answer: 
I couldn't get a clean cut out of the three 1" mosaic tiles I tried. I put this blade back in the box. You would think a new blade would go right through the tile. I used a Rigid prior to this and it was good for 40 cuts before getting to dull. This one couldn't make it through the first.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Asked by
Read all my Q&A
December 24, 2013
Answer: 
3x6" glass subway tile 1/4" thick. 60 6" cuts with 8 outlets and 2 ends under cabinets. This was Crystile glass tile. No problem if you go slow, cut face down and keep water at proper level... Changed 3 times during project.
+2points
2out of 2found this answer helpful.
Was this helpful?helpful2unhelpful0

Asked by
Boca Raton, FL
Read all my Q&A
November 14, 2013
Answer: 
Thank you for your inquiry.
We do not have a life expectancy on our saw blades.
The life of the blade depends on the exact type of material that you are cutting, general blade maintenance, handling and storage and how often the blade is used.
If you have any questions please call our Customer Service (866) 435-8665.
Thank you for your interest in our product.
-3points
0out of 3found this answer helpful.
Was this helpful?helpful0unhelpful3
 
5 answers

can this blade be used to cut glass bottles relatively smooth?

This question is from 7 in. Glass Tile Diamond Blade for Wet Tile Saws
Asked by
Tigerville
Read all my Q&A
December 9, 2013
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (5)

Asked by
Philadelphia
Read all my Q&A
June 18, 2014
Answer: 
Yes, it can cut smooth glass tiles.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Nashville, TN, USA
Read all my Q&A
May 6, 2014
Answer: 
The QEP7 is too coarse to cut glass, QEP makes a blade designed to cut glass tiles, model # 6-7006 GLQ. With the difference in the shapes of the glass, tile vs. bottle, it's a trial and error experiment. Good Luck and I hope this helped.
+2points
2out of 2found this answer helpful.
Was this helpful?helpful2unhelpful0

Asked by
Read all my Q&A
March 25, 2014
Answer: 
Yes, but that is probably not a safe thing to do.
-1point
0out of 1found this answer helpful.
Was this helpful?helpful0unhelpful1

Asked by
Read all my Q&A
December 24, 2013
Answer: 
Yes, go slow, cut face down and I used a piece of cardboard between the tile and saw table. The cardboard would get soaking wet, but it absorbed the movement of the tile.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Boca Raton, FL
Read all my Q&A
December 10, 2013
Answer: 
Thank you for your inquiry.
This blade was designed to cut glass tile and was never tested on glass bottles. We cannot recommend this application for this blades
If you have any questions please call our Customer Service (866)435-8665.
Thank you for your interest in our product.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
5 answers

Can this be used to cut onyx tile?

This question is from 7 in. Glass Tile Diamond Blade for Wet Tile Saws
Asked by
jane
May 13, 2013
I've read that a glass blade is good for onyx because it chips easily. Would this blade be a good choice, if not then what would?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (5)

Asked by
Colorado
Read all my Q&A
March 13, 2015
Answer: 
Not sure about onyx but a tile blade will cut the onix very clean
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Philadelphia
Read all my Q&A
June 18, 2014
Answer: 
I used this blade to cut ceramic tiles from Spain. on your case I will visit the Home Depot store for DYI tiles installation workshop and bring a piece of your Onyx tile with you and give it a try. The customer Services Rep. will be more than happy to assist you.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Nashville, TN, USA
Read all my Q&A
May 6, 2014
Answer: 
A diamond glass cutting blade would be ok, QEP makes a blade for glass cutting, model # 6-7006 GLQ. I would suggest using the QEP7 first on a scrap piece of onyx and good quality painters tape on the line top and bottom to avoid splintering and safety reasons. If QEP7 doesn't work out then purchase the diamond glass cutting blade. Good Luck and I hope this helped.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
jane
May 29, 2013
Answer: 
ok, i asked this question. I decided to try this blade to cut my onyx tile. It worked beautifully! You have to be careful and cut slowly but I had no chipping at all! This blade gave me better and cleaner cuts than the factory edges. So if anyone wants to use this blade for onyx go right ahead!
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Asked by
Boca Raton, FL
Read all my Q&A
May 14, 2013
Answer: 
Thank you Jane for your inquiry regarding our glass cutting blade.
This blade has not been tested with Onyx. As you know this product chips easily.
You can try either our glass cutting blade or our 'Black Widow' blade. We would recommend that you cut the tile slowly. We cannot guarantee that this will cut the onyx well, but you could cut a test piece
Thank you for your interest in our QEP product.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
5 answers

What is the arbor size hole on the 7 in. blade

This question is from 7 in. Glass Tile Diamond Blade for Wet Tile Saws
Asked by
dandy
March 5, 2013
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (5)

Asked by
Colorado
Read all my Q&A
March 13, 2015
Answer: 
I want to say that the arbor is 5/8" or 1/2"
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Nashville, TN, USA
Read all my Q&A
May 6, 2014
Answer: 
That would be 5/8" arbor hole.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Irwin Pa.
Read all my Q&A
July 23, 2013
Answer: 
5/8 I believe.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
nj
Read all my Q&A
April 22, 2013
Answer: 
5/8"
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Boca Raton, FL
Read all my Q&A
March 6, 2013
Answer: 
Dandy,
The arbor size hole on the QEP 7in. Glass Tile Diamond Blade for Wet Tile Saws is a 5/8" arbor. Thank you for choosing QEP! If you should have any further questions please call our QEP Customer Service at (866) 435-8665.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
2 »
  • 2016-10-30 T23:17:19.314-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_202329538, prod, sort_default
2 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 138ms
  • QUESTIONS, PRODUCT

Customer Reviews

7 in. Glass Tile Diamond Blade for Wet Tile Saws is rated 4.1 out of 5 by 52.
Rated 5 out of 5 by from Great Glass Cutting Product I'm cutting glass subway tile for a shower and the blade works great, with smooth cuts every time without chipping. Due to the low price, I didn't expect it to last but still a lot of cutting surface remaining after lots of cuts. And, it's half the price of their competitor!
Date published: 2016-09-05
Rated 2 out of 5 by from The first couple of cuts were great. Gives a nice clean cut, but after about the third cut (on m... The first couple of cuts were great. Gives a nice clean cut, but after about the third cut (on my 6" x 24" ceramic floor tile) it struggled to make the cut and took 2-3 times longer to get the cut made.
Date published: 2016-12-06
Rated 3 out of 5 by from This blade had good reviews and I was replacing a 22 year old blade so had expected impressive pe... This blade had good reviews and I was replacing a 22 year old blade so had expected impressive performance. It cut ok but actually not even as well as the old one that died on me.
Date published: 2017-01-02
Rated 5 out of 5 by from Outstanding cuts in glass and ceramic tile. Worked great, even on narrow interlocking tile squar... Outstanding cuts in glass and ceramic tile. Worked great, even on narrow interlocking tile squares that have about 16 rows of narrow tile in each piece.
Date published: 2016-11-29
Rated 1 out of 5 by from Very poor quality. I don't recommend any of their diamond tile cutting products. Very poor quality. I don't recommend any of their diamond tile cutting products.
Date published: 2016-12-20
Rated 5 out of 5 by from Great product Saw blade was a perfect on my small tile saw. Cuts tile like butter.
Date published: 2016-08-30
Rated 5 out of 5 by from Works good for cutting glass tile. Works good for cutting glass tile.
Date published: 2016-11-01
Rated 5 out of 5 by from Excelent cut and low price Excelent cut and low price
Date published: 2016-11-09
  • y_2017, m_1, d_21, h_24
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_52
  • loc_, sid_202329538, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 58ms
  • REVIEWS, PRODUCT