0648846002972

RIDGID

Model VT2570

Internet #100375877

Store SKU #385797

1-7/8 in. x 10 ft. Pro-Grade Vacuum Hose Kit for RIDGID Wet Dry Vacs

$36.97 /each
  • 10' premium hose is 4X more durable than typical vac hoses
  • Fits vacs with 2-1/2" and 1-7/8" hoses
  • Premium construction provides extra flexibility & prevents kinks

Frequently Bought Together

Product Overview

The RIDGID Universal Wet/Dry Vacuum Hose is 4 times more durable and flexible than a standard RIDGID hose, and it is 10 ft. long for extra reach. Easy care and exceptional durability.

  • Use as a replacement or extension kit for most RIDGID vacuums
  • Fits RIDGID vacuums with 2-1/2 in. and 1-7/8 in. hoses
  • 1-7/8 in. x 10 ft. for extra reach
  • 4 times more durable than a standard RIDGID hose
  • Flexible and resists collapsing
  • Vacuum and spot clean
  • Filter Comparison Chart

    FilterChart

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

22 Questions48 Answers

Customer Questions & Answers

1-7/8 in. x 10 ft. Pro-Grade Vacuum Hose Kit for RIDGID Wet Dry Vacs
1-7/8 in. x 10 ft. Pro-Grade Vacuum Hose Kit for RIDGID Wet Dry Vacs

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
 
6 answers

Can you buy the adapters only?

This question is from 1-7/8 in. x 10 ft. Pro-Grade Vacuum Hose Kit for RIDGID Wet Dry Vacs
Asked by
Appleton, WI
Read all my Q&A
October 29, 2014
I bought one of these years ago, but lost the adapters. Can I buy the adapters individually? If so, where and how?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (6)

Asked by
Essex County, NJ
Read all my Q&A
Home Improvement Profile: DIYer
May 17, 2016
Answer: 
Adapters are sold separately, but the connector you need that has a barb that locks into the inside of the hose (replacing the 2-1/2" fitting that comes with the hose) and connects to 1-7/8" tools with a locking fitting, is NOT available either with the hose or separately. I would have quickly bought it, had it been offered.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
sebring, fl
Read all my Q&A
Home Improvement Profile: DIYer
October 21, 2015
Answer: 
Yes you can. You can pick up a package of assorted adapter at HD in the tool section usually, that is where they keep the wet vacs. Most hardware stores that carry wet vacs should have the adapters for them.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

November 5, 2014
Answer: 
Not sure about online, but you can in the store.
-1point
0out of 1found this answer helpful.
Was this helpful?helpful0unhelpful1

Asked by
Read all my Q&A
November 3, 2014
Answer: 
Thank you for your interest in RIDGID!
Please note that the only available adapters that can be purchased separately are the following:
A. The expansion cuffs on both ends of the hose.
B. The red locking tab on the hose adapter
E. The friction fit on the hose adapter
There are only two options on where to purchase the VT2570 adapters. It can either be through our customer service organization over the Read More
Thank you for your interest in RIDGID!
Please note that the only available adapters that can be purchased separately are the following:
A. The expansion cuffs on both ends of the hose.
B. The red locking tab on the hose adapter
E. The friction fit on the hose adapter
There are only two options on where to purchase the VT2570 adapters. It can either be through our customer service organization over the phone at 1-800-474-3443 or through the Special Order Desk of Home Depot store. Part numbers are: for expansion cuffs - 831330, red locking tab – 826354 and friction fit – 815096.
Regards,
RIDGID
Read Less
0points
2out of 4found this answer helpful.
Was this helpful?helpful2unhelpful2

Asked by
Read all my Q&A
November 1, 2014
Answer: 
Thanks for the answer, but as you can see the adapter set you reference is not the same as the ones that are supplied with VT2570.
+2points
2out of 2found this answer helpful.
Was this helpful?helpful2unhelpful0

October 31, 2014
Answer: 
Thank you for your recent inquiry with The Home Depot. I found a 3-Piece Adapter Kit. It is internet number #202077239 store SKU #463684. This item is currently in stock online. For any other questions, please call us at HomeDepot.com Customer Service 800-430-3376.
0points
1out of 2found this answer helpful.
Was this helpful?helpful1unhelpful1
 
5 answers

Will this hose kit fit the WD4070?

This question is from 1-7/8 in. x 10 ft. Pro-Grade Vacuum Hose Kit for RIDGID Wet Dry Vacs
Asked by
Wichita KS
Read all my Q&A
June 18, 2015
The WD4070 is a 1 7/8 hose. The hose kit says it fits 1 7/8. However after I bought it the instruction sheet does not list the WD 4070 and I cannot find the right adapters in the box. Thanks!
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (5)

Asked by
wisconsin
Read all my Q&A
Home Improvement Profile: DIYer
March 25, 2016
Answer: 
The angled adaptor for the tool end can be removed from the old hose. It is a tight fit, but it can be removed and re-used so the clip end can be used with your old tools and the new hose.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Essex County, NJ
Read all my Q&A
Home Improvement Profile: DIYer
December 28, 2015
Answer: 
It seems that I cannot edit my review from yesterday, so here is a followup. Sure enough, the issue with fit up to the WD4070 is that Ridgid evidently shipped some of the hose kits with the wrong adapter. The kit I swapped for in the store had the correct 1-7/8" adapter. That now makes it possible for this hose to be used with the WD4070. Unfortunately, the 1-7/8" connector on the tool end is not the Read More
It seems that I cannot edit my review from yesterday, so here is a followup. Sure enough, the issue with fit up to the WD4070 is that Ridgid evidently shipped some of the hose kits with the wrong adapter. The kit I swapped for in the store had the correct 1-7/8" adapter. That now makes it possible for this hose to be used with the WD4070. Unfortunately, the 1-7/8" connector on the tool end is not the Tug-A-Long type - it is only a tapered, friction-type fitting. Now the wands do have the Tug-A-Long clips, as does the standard stiff corrugated hose that came with the WD4070 vacuum. The 20 Ft. long 2-1/2" extension hose that Ridgid sells does have Tug-A-Long fittings on both ends. It would have made good sense for Ridgid to include a 1-7/8" Tug-A-Long adapters for both ends of this pro-grade hose. No so. This is a shortcoming, for sure, and limits the usefulness of this extension hose. Read Less
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Essex County, NJ
Read all my Q&A
Home Improvement Profile: DIYer
December 26, 2015
Answer: 
I have the same issue and understand Lucy1977's problem. I bought the WD4070 and this VT2570 - 10 Ft. Pro Grade Hose Kit at the same time. The problem is that the hose kit had the wrong adapters inside. Instead of the 1-7/8" swivel adapter, my hose kit had a 1-7/8" to 1-1/4" friction adapter. Yes, the one end with the "Black" clip attaches to the vacuum as the Rigid factory rep says. However, the other Read More
I have the same issue and understand Lucy1977's problem. I bought the WD4070 and this VT2570 - 10 Ft. Pro Grade Hose Kit at the same time. The problem is that the hose kit had the wrong adapters inside. Instead of the 1-7/8" swivel adapter, my hose kit had a 1-7/8" to 1-1/4" friction adapter. Yes, the one end with the "Black" clip attaches to the vacuum as the Rigid factory rep says. However, the other end of the hose is flexible a 2-1/2" female friction fitting that either slides outside a 2-1/2" male hose, or accepts the pop-inside adapter to other hose sizes. Without the correct adapter being included, the tool end of this hose CANNOT connect to the 1-7/8" extension wands or tools that came with the WD4070 vacuum, and it will no longer be a Tug-A-Long hose if only friction fittings are used. I am an engineer and there is no doubt that this kit is being shipped with the wrong adapters, so please don't tell me that I am not seeing that I have all that I need to connect this hose kit with the WD4070.The Rigid folks owe us a better explanation than their pat, cook-book answer that the hose works with everything. Mine did not. Obvioucly, Lucy1977's did not either. I am headed to my local store where they have some more of these hose kits. I'll open one at Customer Service counter and see if it has the right adapters inside. If so, I'll swap it. If not, I just may return both the WD4070 vacuum and this stinking hose. Read Less
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Read all my Q&A
June 22, 2015
Answer: 
Thank you for contacting RIDGID.
VT2570 hose kit will surely fit WD4070. You may use the black locking tab or adapter that comes with the hose kit to directly connect the orange hose to the vac’s inlet.
If you have any further questions or concerns, feel free to call us at 1-800-4-RIDGID (1-800-474-3443) or you may send your email to info@ridgidvacs.com
Regards,
RIDGID
-1point
0out of 1found this answer helpful.
Was this helpful?helpful0unhelpful1

June 19, 2015
Answer: 
The Rigid 10 ft. Pro-Grade Universal Wet/Dry Vacuum Hose Kit is made to fit Ridgid vacuums with 2-1/2" and 1-7/8" hoses
-3points
0out of 3found this answer helpful.
Was this helpful?helpful0unhelpful3
 
3 answers

Is the inside of this hose smooth bore, or is corregated like the outside?

This question is from 1-7/8 in. x 10 ft. Pro-Grade Vacuum Hose Kit for RIDGID Wet Dry Vacs
Asked by
Morrisville, Pa.
Read all my Q&A
October 24, 2015
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (3)

Asked by
Essex County, NJ
Read all my Q&A
Home Improvement Profile: DIYer
May 17, 2016
Answer: 
It is corrugated.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

December 18, 2015
Answer: 
Its corrugated. I know they make corrugated hose with a smooth inside for different things. I have just never seen one for a shop vacuum. I do know companies like electrolux makes hoses like that for their vacuums but they are small diameter hoses for house vacuums. You probably could still adapt it to your shop vacuum. As corrugated hoses significantly reduce the effective interior diameter of the hose. Read More
Its corrugated. I know they make corrugated hose with a smooth inside for different things. I have just never seen one for a shop vacuum. I do know companies like electrolux makes hoses like that for their vacuums but they are small diameter hoses for house vacuums. You probably could still adapt it to your shop vacuum. As corrugated hoses significantly reduce the effective interior diameter of the hose. So a smaller hose with PVC lining or some other type of lining to make it smooth would perform the same if not better than the corrugated hose, accept for the size of material you can vacuum up. Read Less
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Asked by
sebring, fl
Read all my Q&A
Home Improvement Profile: DIYer
October 27, 2015
Answer: 
It does seem to have some corregation but, not near as deep as the outside. I did not take the end off to check how deep but I can tell that it is no where close to the depth of the outside.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
 
3 answers

Do the ends screw off

This question is from 1-7/8 in. x 10 ft. Pro-Grade Vacuum Hose Kit for RIDGID Wet Dry Vacs
Asked by
Read all my Q&A
October 19, 2015
Do the tips on the ends of this hose screw off and others screw on ... OR are the two black tips permanently fixed?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (3)

Asked by
Los Angeles, CA
Read all my Q&A
Home Improvement Profile: DIYer
June 28, 2016
Answer: 
No. They need to be pulled off which is sometimes a difficult procedure as the "rubber" ends of the hose hole the plastic couplings rather tightly
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

December 18, 2015
Answer: 
yes
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
sebring, fl
Read all my Q&A
Home Improvement Profile: DIYer
October 21, 2015
Answer: 
Both of the black ends will come off. They are form fitted to the hose but you can screw them off.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
2 »
  • 2016-08-29 T13:47:55.258-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_100375877, prod, sort_default
2 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 111ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 4.0 out of 5 by 86 reviewers.
Rated 1.0 out of 5.0 by HOSE BROKE THE FIRST TIME I USED IT HOSE BROKE THE FIRST TIME I USED IT. I NEVER COULD GET IT TO FIT RIGHT INTO THE MAIN VACUUM HOSE. IT IS TOO LOOSE TO STAY LONG ENOUGH TO DO ANYTHING WITH IT. AFTER A FEW MINUTES OF GETTING IT TO WORK, IT BROKE. July 21, 2016
Rated 5.0 out of 5.0 by Great vacuum hose We have the 6.5 horse power...16 Gallon .. Ridgid Vacuum ...Great hose ..Top quality ...put on the fittings ..and was really happy with this 10' foot hose ...No kinking eather ..Great Up-Grade Hose ..Do Not hesitate to buy this hose ..This hose will also Rotate ..and still keep full Suction...The Rotate Fittings are a special Slide on Fitting that will Rotate with out kinking and adding extra damage to the end of the fitting and hose ...so if you get lazy and drag the vacuum with the hose like i do .. ..it will sercum to the pulling and support the hose ..... July 15, 2016
Rated 4.0 out of 5.0 by High build quality! Internal diameter is smaller than my original hose, preventing larger items from being vacuumed up, but the build quality of this new hose is much higher. All original attachments fit well and works great for dust, dirt, shavings, etc. August 9, 2016
Rated 1.0 out of 5.0 by Avoid Single worst purchase ever at Home Depot. Hose is heavily corrugated, so it clogs with every serious use. And the end fittings pull off the hose continuously. Used it for years, swear at it daily. Awful engineering. August 4, 2016
Rated 2.0 out of 5.0 by Don't store where it's hot I live in Arizona and keep my vac outside on the patio. Hose ends come apart when they get soft from the heat July 21, 2016
Rated 5.0 out of 5.0 by I wish I would have purchased this years ago I have had the 14 gallon Rigid shop vac for 8-10 years. I have always hated the hose as being too stiff. This is so easy to handle and it is a couple of feet longer. I wish I would have bought this years earlier. July 26, 2016
Rated 5.0 out of 5.0 by nice to have very nice hose is much better than the plastic that comes with vac...I bought 2 and connected August 2, 2016
Rated 1.0 out of 5.0 by Whistles!!!!! The hose is well made and seems to be of quality build but it causes a loud whistling noise while using. It is meant to replace both size hoses but it of the smaller diameter so it gets blocked fairly easily whereas the latger diameter does not. July 27, 2016
  • 2016-08-29 T13:50:39.825-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_86, tr_86
  • loc_en_US, sid_100375877, prod, sort_default
2 3 4 >>
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 43ms
  • REVIEWS, PRODUCT