Model # R4030S

Internet #203757434

Store SKU #311220

RIDGID 7 in. Tile Saw with Stand
0648846063546

RIDGID

7 in. Tile Saw with Stand

  • Cut Capacity: 24 in. rip, 18 in. diagonal, 2-1/4 in. deep
  • Die Cast Aluminum Table
  • Exact-line adjustable laser alignment system
$297.00 /each

Frequently Bought Together

Product Overview

RIDGID introduces its new 7 in. Job Site Wet Tile Saw with included stand. This is the most affordable pro saw on the market. This saw's powerful 9 Amp, 1-3/4 HP motor, best-in-class cutting capacities, die cast aluminum table and heavy duty arm all come standard on this saw. Every feature on this saw is innovative and the definition of quality for a pro tile saw. The Deep Well Wave Wall will extend the life of your pump and the removable water nozzles maximize water efficiency to the blade while cutting. This equals better cutting for a longer time than competitor saws. All of these amazing features are backed by RIDGID's industry leading lifetime service agreement. That means free parts, free service, for life.

California residents: see   Proposition 65 information

  • Powerful motor heavy duty motor powers through natural and manmade tile and pavers
  • Best in class cut capacity 24 in. rip, 18 in. diagonal and 2-1/4 in. deep
  • Die cast aluminum table runs on dual precision extruded aluminum rails, guided by sealed ball bearing rollers, provides solid material support and measurement marks for added accuracy
  • Included stand for ease of use on any jobsite
  • Exact-line adjustable laser alignment system assists operator in accurately align cutting wheel with the cut line
  • Guard baffle reduces air turbulence to help keep water on the blade while removing excess water to limit misting and overspray
  • Beveling head accurately position the head to make 0 Degree and 45 Degree bevel cuts
  • Plunging head allows controlled cuts for electrical outlets and HVAC registers
  • Submersible pump - high volume pump provides water to the cutting wheel
  • Deep well wave wall creates barrier around pump well that extends pump life by blocking sediment from entering pump when in use
  • Compatible with AC1136 RIDGID Submersible Water Pump
  • Click Here to Register Your Product

    Test Item

  • Click here for more information on Electronic Recycling Programs

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

Can this model make bevel cuts?

Asked by: Anonymous
The saw does bevel cut. you must raise the saw head by adjusting the plunge cut depth and check blade clearance when table passes under the blade. The blade must be below the table surface , but not contacting the table. Re adjust as necessary.
Answered by: DIARAM
Date published: 2016-12-16

what is the weight of this saw?

Asked by: Neal
look at the specs 40 lbs well the specs says 40 lbs but it feels more heavy in the box, more like 55 or 60 but i could be wrong
Answered by: JVS
Date published: 2017-02-20

The specs on this saw list porcelain, glass, ceramic and pavers, will this saw cut through marble tile?

The online specs show this wet saw cuts procelain, glass, ceramic and paver tiles. It does not show that it cuts marble tile. I have 12"x12" marble tile to install in a bathroom floor. Will this saw cut through marble tile? If so- will I need to purchase a different saw blade or will the one that comes with the saw work on marble?
Asked by: C1130
yes
Answered by: Jackofall
Date published: 2016-11-15

Can you plunge cut with this? Or does the blade just slide back and forth?

Asked by: Anonymous
the saw head pivots or can be locked in place for normal cutting. the table slides for normal cutting. plunge cut for register cuts ect
Answered by: DIARAM
Date published: 2016-02-10
  • y_2017, m_4, d_22, h_2CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_69
  • loc_, sid_203757434, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 16ms
  • QUESTIONS, PRODUCT

Customer Reviews

7 in. Tile Saw with Stand is rated 4.1 out of 5 by 229.
Rated 4 out of 5 by from I bought this saw to hopefully cut cleaner lines in 12" x12" ceramic tile compared to the QEP sco... I bought this saw to hopefully cut cleaner lines in 12" x12" ceramic tile compared to the QEP score-n-snap thing I have now. I also needed to be able to cut 45° bevel angles once in a while to make my corners look good (especially outside corners). Assembly was easy, and the first cut I made I noticed it was not aligned from the factory (the table and the saw blade.) but easy enough to fix with a 5mm allen wrench (not provided) and a square. The built in laser light is handy too, even though it's not advertised on the box. I tried the "bevel" or 45° cut next and I was surprised how much chipping there was on the side of the tile I wanted to keep. The other side (for inside corners) was perfect. I tried cutting my bevels with the finished side down and it came out a little better, although the corner chipped each time. This isn't really the tile cutter's fault but just be prepared to deal with it. The only other thing I wasn't expecting was how messy it is. Water EVERYWHERE. Do not try to use this inside like I did. There's spray out the back from the blade, lots of dripping from the tray as you approach the end of a cut (it reaches past the edge of the table) and just general mist in the air. My floor, wall and window are soaked, almost flooded from just a few test cuts. USE EAR PROTECTION, it is very loud. Your bathroom tile isn't worth losing your hearing over.
Date published: 2017-01-21
Rated 4 out of 5 by from great saw at a good price. Tilting head for mitre cuts seals the deal for me. lightweight and e... great saw at a good price. Tilting head for mitre cuts seals the deal for me. lightweight and easy to move around. Drain is in a terrible place. Every other wetsaw I have ever owned has a plug in the center of the bottom of the tray. Put a bucket under it and pull the plug. This has a side drain that screws in with a washer to stop the water. Water gets everywhere, sprays as you are unscrewing it and drains all over the stand and floor. but it cuts great.
Date published: 2016-11-02
Rated 1 out of 5 by from This saw is garbage for the following reasons: run out out of the box. The blade and arbor nut ca... This saw is garbage for the following reasons: run out out of the box. The blade and arbor nut can be moved with your fingers in a lateral way and you can hear and feel the run out. When the saw slows down you can see the blade wobble. I can not imagine how bad the run out would be after heavy usage. The bevel produces a perfect edge on the scrap side of beveled tiles, the side you would use is garbage. Turned it over to cut, but the result was the cut was perfect on back and garbage on front. Straight cuts are ok with some visible imperfections in cut line. So if you want to pay 297.00 for a saw that works about as well as one for 89.00, then this is the saw for you.
Date published: 2017-02-28
Rated 4 out of 5 by from Works well. Was able to make every cut we needed with 18 inch tiles. Takes some time to dial in... Works well. Was able to make every cut we needed with 18 inch tiles. Takes some time to dial in for accuracy but once it is set you are good to go. Make several cuts on throw away tiles first to ensure that the blade is worked in and that it is cutting exact. I used old bathroom tiles that were extras from another job.
Date published: 2017-03-08
Rated 5 out of 5 by from I have used a number of tile saws before and this one surpassed all expectations. It was easy to ... I have used a number of tile saws before and this one surpassed all expectations. It was easy to assemble, and on the joist worked like a charm. I used it on 6 jobs so far and it runs like a champ.
Date published: 2017-01-25
Rated 4 out of 5 by from Have been using it for about 3 weeks now cutting slate tile and it's been performing fine. The in... Have been using it for about 3 weeks now cutting slate tile and it's been performing fine. The included blade slices through easily and cleanly. The laser isn't "dead on"- but I imagine could be adjusted (didn't take the time to do so as I really wouldn't use it anyway). The only complaint I have (and it's a minor one), is that the drain plug on the side of the pan is right next to one of the legs on the stand- you can't drain the water into a bucket without spilling all over. Working outside that's not an issue. But I'm working inside. Would have preferred it on the underside of the pan or at one end. All my power tools seem to be turning orange.
Date published: 2016-11-30
Rated 5 out of 5 by from I needed a tile saw for a job using 12x24 porcelain tiles. The previous portable saw I had couldn... I needed a tile saw for a job using 12x24 porcelain tiles. The previous portable saw I had couldn't handle the job. This model passed the test in flying colors. I like that the table is set up for easy cross-cuts on 24 in. tiles where you can just put the tile against the front ridge on the table, then slide it forward for a perfect straight cut. The motor is powerful and cut this hard 3/8 in. think tile easily and smoothly. I think comparable tile saws cost closer to $600 and up, so this was a good investment. I'd recommend this machine to anyone.
Date published: 2016-11-07
Rated 2 out of 5 by from Nothing secures the stand to the pan so it will fall if moved much at all. The table is not 90 de... Nothing secures the stand to the pan so it will fall if moved much at all. The table is not 90 degrees to the saw so a slight angle on long cuts even with a 6" tile. The Lifetime service agreement is a joke. This is the second time I sent in a LSA for a rigid tool and the second time they say a problem occurred and I have to sent my original copy etc. and send it registered. Never mind they can have it! Last Ridgid tool period!
Date published: 2017-03-26
  • y_2017, m_4, d_24, h_7
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_229
  • loc_, sid_203757434, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 22ms
  • REVIEWS, PRODUCT