Model # 10-981-25

Internet #100080708

Store SKU #433995

Store SO SKU #1001375078

Roberts Snozzle Cove Base Adhesive Cartridge Spreader and Applicator


Snozzle Cove Base Adhesive Cartridge Spreader and Applicator

$2.97 /each

Frequently Bought Together

Product Overview

The Roberts Cove Base Adhesive Nozzle spreads 11 rows of adhesive to create a flat, well-bonded installation. The nozzle fits most standard 11 oz. and 30 oz. cartridge application guns.

  • Distributes 11 rows of cove base adhesive evenly
  • Works with 11 oz. and 30 oz. adhesive cartridges
  • Fits most standard applicator guns
  • Covers more surface area in 1 pass than traditional trowels

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.



Warranty / Certifications

More Products With These Features


Customer Questions & Answers

1 Question1 Answer

Customer Questions & Answers

Snozzle Cove Base Adhesive Cartridge Spreader and Applicator
Snozzle Cove Base Adhesive Cartridge Spreader and Applicator

Ask your questions. Share your answers.

Clear Search Term
1 answer

Can you open it up and clean it out?

This question is from Snozzle Cove Base Adhesive Cartridge Spreader and Applicator
Asked by
Read all my Q&A
August 4, 2016
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

Asked by
Read all my Q&A
September 12, 2016
No you cant open it (unless you count when it splits open because its cheaply made) but you might be able to wash it with soap and water before the caulk dries. I just considered them disposable, but I did use a small piece of wire to clean the holes if I'd let it sit too long
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
1 of 1
  • 2016-10-25 T16:58:09.175-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_100080708, prod, sort_default
1 of 1
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 120ms

Customer Reviews

Rated 3.4 out of 5 by 11 reviewers.
Rated 5.0 out of 5.0 by Works great Its a disposable nozzle. If you are running a bunch of cove base its great, applies the adhesive evenly..No trowels or multiple beads. Cuts install time. Its worth the 3 bucks if you are running more than a few pieces. Ive used these numerous times never had one split? Maybe if you were using some heavy bodied adhesive or caulk but Ive never had problems. User error? Ive seen guys blow out caulk tubes or get reverse flow at plumger end with too much pressure for the opening in the tube. Technique matters in everything... September 15, 2016
Rated 1.0 out of 5.0 by Convenient, but quality is junk Pro: Its cheap & it will allow you to apply adhesive quickly. Cons: Its extremely poor quality. The plastic is thin and poorly seamed together I bought 2 of these for a 2 day job. Once I started clicking the caulk gun to fill the snozzle under pressure the seams split and the caulk came out the side. I had this happen on both of them. I pulled the nozzle back off, wiped off the caulk and tightly wrapped it in electrical tape and was able to continue. September 12, 2016
Rated 5.0 out of 5.0 by Excellent!!! Saved time AND glue (decreased excess glue oozing out of top and bottom of molding); you will love this tool IF you treat it as what it is intended to be -- DISPOSABLE accessory to make your job easier! June 17, 2016
Rated 1.0 out of 5.0 by Totaly unecessary It looks like a good idea, this is what is going to happen, it will work at your first use and while you spread it, you will think to your self what am I doing?, so much waist of glue inside this thing, I could easily have done exactly the same thing without it and after the first use it will get clogged and you will have to through it away...., really.. save your valuable money and the embarrassment to your self. March 26, 2016
Rated 5.0 out of 5.0 by Great tool, highly recommended I replaced a kitchen floor that had cove base molding rather than standard baseboard molding. The cove base was in great shape so I decided to try to reuse it. It came off the wall easily and required very little scrapping to clean it up. The only negative reviews I read about this adhesive spreader was that the adhesive dried in the spreader and clogged it so I knew I had to keep moving until the job was finished. With all the cove base laid out in its proper location I began. The spreader worked beautifully. It applied neat, even rows and the thickness of the beads was adjustable by altering the angle of the spreader. I used a small paint roller to adhere the base to the wall evenly. Once used the spreader is impossible to clean so plan on trashing it, it's only three bucks. I couldn't be happier with the results, the spreader worked perfectly. I highly recommend this tool for any cove base installation. December 9, 2015
Rated 5.0 out of 5.0 by Must have for baseboards! I don't know how I installed vinyl baseboard without one of these, I'll buy one everytime I order baseboard in the future. I only ordered this because I was installing 6" vinyl base and thought it might be a pain to deal with on a 120' roll. It was so much easier than try to apply and spread the old way. I would treat this asa disposable per job (or per day) but it is definitely worth it. November 10, 2015
Rated 4.0 out of 5.0 by Well worth it Perfect size for molding, wasted a lot of glue inside when done but speed and ease of use more than made up for it! December 8, 2015
Rated 5.0 out of 5.0 by Worked Great This little tool cut the installation time in half. Worked just as advertised. June 10, 2015
  • 2016-10-26 T18:21:15.809-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_11, tr_11
  • loc_en_US, sid_100080708, prod, sort_default
2 >>
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 69ms