Rated 3.7 out of 5 by 11
Rated 4.0 out of 5.0 by Raquel great product, horrible instructions
So the picture for the hardware really doesn't explain what to do. You need to bend the anchor in on itself to form that point. I used a 7/32 drill bit to make the hole. Then worked the folded point of the anchor in a little by hand and hammered it in the rest of the way (you want it to be tight). You then proke the black piece into the hole to open up the anchor. You might need to hammer that a bit too but mostly i was able to push it in and hear the anchor pop open. Then just screw in the metal piece. Very easy once you figure it out! Why they couldn't tell you this somewhere i have no idea! !
March 20, 2015
Rated 5.0 out of 5.0 by LouLias good product
simple white twin track bracket. color is consistent and not chipping.
April 21, 2015
Rated 1.0 out of 5.0 by nohelp Instructions??????
I have browsed the internet for quite some time looking for instructions ... there isn't any on the site or on any of the packaging... I guess you have to KNOW someone that knows how to do this ... like an ancient Chinese legend passed down from generation to generation... EVEN SHAMPOO HAS INSTRUCTIONS ON IT!!!!
February 1, 2015
Rated 4.0 out of 5.0 by bparker great hardware - infuriating labeling
We love these metal shelving standards and brackets. They're terrific. But as for the shelves themselves, we will NEVER buy the Rubbermaid brand again. The shelves are labeled using an adhesive that extremely frustrating. Try using a razor blade or a scraper to get the label off and you'll likely damage the delicate surface. We have yet to have a label come off in one piece on the many shelves we now greatly regret purchasing. Getting them off is a needlessly time-consuming and maddening process. Come on Rubbermaid! We've purchased many plastic products (Sterlite, Hefty) where the labels are thicker and the adhesive properly formulated so they peal off with ease!
July 6, 2013
Rated 5.0 out of 5.0 by Whenthevalues An excellent, well made system
I just love this system. I use it mostly for books and books are heavy.
October 7, 2014
Rated 5.0 out of 5.0 by chdoctor Strong and Reliable
I use this dual track system for shelving my books. I secure the rails with 2.25" masonry screws into my cinder block walls, spacing them 14-15" apart. I chose 12" deep shelves to accommodate my 3-ring binders. Otherwise, the 10" deep shelves would do for most books if you don't mind the widest ones sticking out a little. The cinder blocks will give before the shelving will. This system uses wall space better than free-standing bookcases. If I ever want to move the shelves, they'd also take up less space than a bookcase. I highly recommend Rubbermaid's dual track shelving systems for heavy storage (like books). Like my wife, they're strong and reliable.
July 22, 2008
Rated 4.0 out of 5.0 by PeterD123 Inconvenient screw holes for fastening to shelf
Most brackets of this type have a way to fasten the self to it (so the shelf does not slide off and fall. Usually a screw hole near the tip. The screw holes for this bracket are really far back and require long screws. Weird ... not sure the advantage of that and certainly not as easy as it could be. No instructions included or online regarding this. The label peels off OK ... I went really slow.
March 1, 2014
Rated 3.0 out of 5.0 by SouthernGal Not Easy To Install
The tracks were easy enough to install AFTER I bought some good drywall anchors that I could screw into the wall. The shelves are nice, and I was able to get the sticker off easily enough. However, the big problem I had was using the screws that are suppose to secure the bracket to the shelf. Both the long and short screw barely went into the shelf, and immediately came off. Right now we have the shelves just lying on the brackets until we figure out a way to permanently attache them.
January 8, 2014