Model # 253521

Internet #204644770

Store SO SKU #1000140925

Rust-Oleum Automotive 1 qt. Auto Body Metallic Clear Coat Paint (Case of 2)
0320066046577

Rust-Oleum Automotive

1 qt. Auto Body Metallic Clear Coat Paint (Case of 2)

$44.87 /case

Frequently Bought Together

Product Overview

Rust-Oleum Automotive 1 qt. Auto Body Metallic Clear Coat Paint (Case of 2) is easy to apply dries quickly and can be buffed to a brilliant finish. No recoat window limitations means additional coats can be applied at any time. Ready to spray system.

California residents: see   Proposition 65 information

  • Designed for all vehicles
  • Covers up to 50 sq. ft.
  • Gloss finish
  • For best results use the auto body system (primer - paint - clear)
  • Acrylic lacquer clearcoat formulation
  • Tough, road resistant finish
  • Ready to spray system
  • Seals and protects
  • Cleans up with mineral spirits

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

4 Questions4 Answers

Customer Questions & Answers

1 qt. Auto Body Metallic Clear Coat Paint (Case of 2)
1 qt. Auto Body Metallic Clear Coat Paint (Case of 2)

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
 
1 answer

Can this be used to clear over enamel rustoleum?

This question is from 1 qt. Auto Body Metallic Clear Coat Paint (Case of 2)
Asked by
houston tx
Read all my Q&A
September 20, 2016
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

September 21, 2016
Answer: 
Yes, it can! Allow the base coat to dry before applying Rust-Oleum Automotive Auto Body Clear Coat.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
1 answer

does it cover 50 sq ft in one coat or is that based on 2-3 coats?

This question is from 1 qt. Auto Body Metallic Clear Coat Paint (Case of 2)
Asked by
Read all my Q&A
November 24, 2015
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

January 20, 2016
Answer: 
The listed square footage is based of one coat of this product.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
1 answer

it's metalic clear, so does that mean it has metalic in the clear

This question is from 1 qt. Auto Body Metallic Clear Coat Paint (Case of 2)
Asked by
North Las Vegas, Nevada
Read all my Q&A
January 3, 2015
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

January 6, 2015
Answer: 
The Auto Body Metallic Clear Coat Paint does have little metallic flakes in the clear coat.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
 
1 answer

do I need to add something to the clear coat out of the can to make it work and harden.

This question is from 1 qt. Auto Body Metallic Clear Coat Paint (Case of 2)
Asked by
Read all my Q&A
August 26, 2014
I have 4 quarts of clear coat and need to know if I have to buy something to add to it before I spray it on the truck.
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

August 29, 2014
Answer: 
There's no need to add anything to this product to make it harden.
Rust-Oleum Auto Body Clear is ready to use and does not require any reducing, but can be thinned with Rust-Oleum Acetone if desired. Auto Body Clear should be applied after the Auto Body Paint has dried completely. Stir can contents thoroughly before application. Strain with a fine screen before pouring it into the spray gun cup. Set Read More
There's no need to add anything to this product to make it harden.
Rust-Oleum Auto Body Clear is ready to use and does not require any reducing, but can be thinned with Rust-Oleum Acetone if desired. Auto Body Clear should be applied after the Auto Body Paint has dried completely. Stir can contents thoroughly before application. Strain with a fine screen before pouring it into the spray gun cup. Set conventional spray gun pressure to 30-40 psi. Apply 2-4 coats allowing 5-10 minutes of dry time between coats.
Dry and recoat times are based on 70°F (21°C) and 50% relative humidity. Dries to touch in 30 minutes and is fully dry in 1 hour. Allow more time in cooler temperatures and when 2-3 coats are applied. Read Less
+3points
3out of 3found this answer helpful.
Was this helpful?helpful3unhelpful0
1 of 1
  • 2016-10-30 T22:31:17.956-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_204644770, prod, sort_default
1 of 1
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 102ms
  • QUESTIONS, PRODUCT

Customer Reviews

  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 47ms
  • REVIEWS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;