Model # 7769830

Internet #202056392

Store SKU #445614

Rust-Oleum Stops Rust 12 oz. Flat Rusty Metal Spray Primer
0020066776985

Rust-Oleum Stops Rust

12 oz. Flat Rusty Metal Spray Primer

$376 /each

Choose Your Options

Number per Package
1

Frequently Bought Together

Product Overview

Rust-Oleum Rusty Metal Primer Spray bonds tightly to rust. It forms a surface that topcoats can easily adhere to. This formula drives out corrosive air and moisture other primers leave behind.

California residents: see   Proposition 65 information

  • Features a comfort tip with a wider finger pad to reduce fatigue caused by continuous spraying, in addition, there is an any-angle spray feature that allows you to spray in any direction, even upside down
  • Dries in as little as 15 minutes for your convenience and covers an area of up to 20 sq. ft.
  • Its durable, corrosion-resistant and can be used indoors or outdoors for versatility
  • Easy clean-up with mineral spirits
  • Actual paint colors may vary from on-screen and printer representations

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

how much area does one can of rusty metal primer cover

Asked by: Anonymous
I used 1 can per 40 pipes joints, 2 3/8".
Answered by: Johnt
Date published: 2017-03-15

Can this product be used on a lightly - moderately rusted surface, and can it be used under exterior latex paint?

This is for an Eagle project, prepping and painting a slightly rusty storage container. School district providing exterior latex paint, but need to decide on rust prep issue.
Asked by: Cathy
Yes, just let it dry for at least 4-5 days before putting the latex over it. I've been using it on house hardware for years and it works great under latex.
Answered by: NCOMC4
Date published: 2017-03-22

Is spray on primer as efficient as tradional paint on primers on metal surfaces?

I'm going to paint a few iron pool gates. I read that spray on primers do not work as well as their traditional counterparts. is that true?
Asked by: Mike
There is a formulation difference in that it comes out thinner than brush on, so you are less likely to have runs (if you do it right with multiple passes) but must use more coats to get the job done and at higher expense since a large % of spray is wasted not hitting the surface at all. I would not use a spray for large areas, like if it takes more than two cans to do a job. Personally I would use a brush on type for iron gates where a cosmetically perfect result is not necessary and harder to see anyway due to the imperfections and angles of the iron, especially if there will be a top color coat over it. Just be sure to put down newspaper or a drop cloth under it to catch drips.
Answered by: Anonymous
Date published: 2016-05-22

is this red oxide?

Asked by: Anonymous
More or less yes, it is someone's idea of a roughly rust color averaged across a multitude of metals that rust. In other words it won't match anything precisely but hey that's what a top coat is for. Personally I think that's a bit backwards as it would be better to have it not the color of rust, rather very light colored so it is easier to see where the coat is thin and needs more applied.
Answered by: Anonymous
Date published: 2017-05-04
  • y_2017, m_5, d_23, h_6CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_5
  • loc_, sid_202056392, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 24ms
  • QUESTIONS, PRODUCT

Customer Reviews

12 oz. Flat Rusty Metal Spray Primer is rated 4.5 out of 5 by 31.
Rated 1 out of 5 by from I hate Rustoleum spray paint. I use spray paint to make a lot of artworks and Rustoleum consiste... I hate Rustoleum spray paint. I use spray paint to make a lot of artworks and Rustoleum consistently clogs both in the cap and in the can itself. I'll put a clean cap on and it still won't spray because the clog will occur in the stem that leads to the cap. Great product if you want to only use half of it. The dry time is also atrocious, sometimes it will still be tacky an hour later. Krylon is a much more consistent product, or if you want a more opaque spray paint with an even finish get Montana. Rusto is junk.
Date published: 2016-12-06
Rated 4 out of 5 by from It worked like any other spray paint. It went on well and covered well. I like the color for th... It worked like any other spray paint. It went on well and covered well. I like the color for the items I painted and wanted to know if I could leave it as a final color, or had to paint over it. I was unable to find the answer to this from Home Depot or the product info. Since I just used it, can not comment on how well it works over time.
Date published: 2017-05-16
Rated 5 out of 5 by from I used this brown color on rusted oil field pipe welds. It blended in perfectly. Cant even see ... I used this brown color on rusted oil field pipe welds. It blended in perfectly. Cant even see the welds on my 2 3/8" pipe fence. All I did was wire brush the welds and wipe off dust with my gloves If I was using clean pipe I would prep with Jasco metal primer first. But rusted oil field pipe, this is the stuff to use.
Date published: 2017-03-15
Rated 5 out of 5 by from I've been using this primer for over 20 years on everything from backhoes, dozers, cars, tractors... I've been using this primer for over 20 years on everything from backhoes, dozers, cars, tractors and anything else that gets rusty or needs protection. I have never been dissapointed, and in the newest version it sprays better and dries faster.
Date published: 2017-03-21
Rated 4 out of 5 by from worked well worked well for my application on a rusted metal surface that i didnt want to completely strip bare
Date published: 2017-04-25
Rated 5 out of 5 by from After painting the white metel fence. the paunt looked songood... After painting the white metel fence. the paunt looked songood i just leftnit
Date published: 2017-04-22
Rated 5 out of 5 by from Sprayed evenly. Left smooth finish. Spot sprayed second coat on bad areas. Sprayed evenly. Left smooth finish. Spot sprayed second coat on bad areas.
Date published: 2016-12-06
Rated 5 out of 5 by from The go to product to seal iron and steel. The go to product to seal iron and steel.
Date published: 2017-05-16
  • y_2017, m_5, d_25, h_7
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_31
  • loc_, sid_202056392, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 139ms
  • REVIEWS, PRODUCT