Model # WS722

Internet #205049842

Store SKU #1000045230

Ryobi 7 in. Tabletop Tile Saw
0033287159833

Ryobi

7 in. Tabletop Tile Saw

  • Miter guide for cuts from 1 to 45 degrees
  • Anti-slip rubber feet for increased stability
  • Powerful induction motor for ceramic, porcelain and stone tile
$129.00 /each

Frequently Bought Together

Product Overview

The Ryobi 7 in. Tile Saw features portability with its compact size that is designed for fast and secure setup. This saw also features best in class cutting capacity with the ability to rip 20 in. tile and diagonally cut 13 in. tile. The tile saw cuts through ceramic, porcelain and stone tiles up to 1-1/4 in. thick with ease and accuracy. This saw has a tilting stainless-steel table to allow bevel cuts at 22.5 degree and 45 degree angles. The saw features a rip guide that locks in place on the front and rear rails to ensure precision cuts that are straight every time.

California residents: see   Proposition 65 information

  • Miter guide allows for easy miter cuts from 0 to 45 degrees
  • Locking rip guide sets up along the front and rear scales for added precision
  • Powerful induction motor powers through ceramic, porcelain and stone tile
  • 7 in. continuous-rim diamond cutting wheel offers precision cutting and prevents chipping
  • Cutting table tilts for precise 22.5 and 45 degree bevel cuts
  • Water reservoir system captures run-off and provides continuous water to the cutting wheel
  • Corrosion-resistant, stainless-steel table for increased durability
  • 1-1/4 in. cutting depth capacity for thick tiles and stepping stones
  • Anti-slip rubber feet for increased stability
  • Clear splash hood for increased visibility
  • Compatible with A114UWP Ryobi Universal Water Pump
  • Click here for more information on Electronic Recycling Programs

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

25 Questions71 Answers

Customer Questions & Answers

7 in. Tabletop Tile Saw
7 in. Tabletop Tile Saw

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
This question is from 7 in. Tabletop Tile Saw
 
11 answers

Will this be great for cutting a 12 in by 24 in tiles

This question is from 7 in. Tabletop Tile Saw
Asked by
Baltimore, MD
Read all my Q&A
November 17, 2014
Will this be great for cutting a 12 in by 24 in tiles ?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (11)

Asked by
Omaha NE
Read all my Q&A
Home Improvement Profile: DIYer
June 22, 2016
Answer: 
I did our kitchen, hallway, & powder room in 12x24. This little saw did a nice job. I did start with a different blade after reading reviews before buying it. But it cut very well. I did have to free hand some cuts, but it was no worse than a 4x8 sheet of plywood on a table saw.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Long Island, NY
Read all my Q&A
November 9, 2015
Answer: 
I cut 13 by 19. the instructions I think say up to 22". The problems are going to getting enough tile on the table so you can use the guide to start the cut. Also the out feed, when you get to the end of the cut the tile is going to want to drop on you so either extend that or have someone hold the out feed. 24" will not fit to cut in half either (width wise accoss the 12" plane) the fence only goes out Read More
I cut 13 by 19. the instructions I think say up to 22". The problems are going to getting enough tile on the table so you can use the guide to start the cut. Also the out feed, when you get to the end of the cut the tile is going to want to drop on you so either extend that or have someone hold the out feed. 24" will not fit to cut in half either (width wise accoss the 12" plane) the fence only goes out to 11" if I recall nor will it do diagonals (corner to corner). If you are good and have steady hand you should be able to free hand those cuts. Mark the line you want to cut along on the "face" the tile with a FINE permenant majic marker (any thing else gets washed away) the blade will cut away the line as you cut. Read Less
+2points
2out of 2found this answer helpful.
Was this helpful?helpful2unhelpful0

Asked by
Mentor, OH
Read all my Q&A
Home Improvement Profile: DIYer
August 19, 2015
Answer: 
Yes and No. Will it cut: yes, will it be 'great for cutting": no The rip-fence only extends to 10" on either side so anything larger you have to free-hand cut but you're 'flying blind' because the splash-guard will block the view of your scribe line. It will cut but lines may not be very accurate. If you have expensive tile, you might have scrap trying to get cuts right unless you don't care.
+2points
2out of 2found this answer helpful.
Was this helpful?helpful2unhelpful0

Asked by
Kansas City, Mo.
Read all my Q&A
Home Improvement Profile: DIYer
June 28, 2015
Answer: 
Yes
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Tampa Florida
Read all my Q&A
March 3, 2015
Answer: 
You would have no problem with up to 18" tile. 24" ones would be too large.
User submitted photo
+4points
4out of 4found this answer helpful.
Was this helpful?helpful4unhelpful0

Asked by
Brownsville, TX
Read all my Q&A
February 17, 2015
Answer: 
I used this wet saw to cut 24 x 24 tiles.
+3points
3out of 3found this answer helpful.
Was this helpful?helpful3unhelpful0

Asked by
Wilmington, DE
Read all my Q&A
November 28, 2014
Answer: 
You can. Keep the short cut at blade side.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Asked by
Fairfax, VA
Read all my Q&A
November 21, 2014
Answer: 
I just completed a shower and floor of 12 x 12 inch tough porcelain tiles. The saw worked perfectly for me and I am very happy with it. The table is really too small to support a 24" long tile so to answer your question, No this will not be "great". It will probably work for the majority of cuts that are only across the 12 inch dimension.
+5points
5out of 5found this answer helpful.
Was this helpful?helpful5unhelpful0

Asked by
North Carolina
Read all my Q&A
Home Improvement Profile: DIYer
November 20, 2014
Answer: 
Following is extracted from HD website.
"...cutting capacity with the ability to rip 20 in. tile and diagonally cut 13 in. tile."
I don't see a hindrance cutting 12x24" tiles on this saw. You'll need to free-hand the tile through the blade, vice using the guide, as it's rated only to 20". As long as you take your time, you shouldn't have any issues.
Two thing I strongly would recommend based upon my Read More
Following is extracted from HD website.
"...cutting capacity with the ability to rip 20 in. tile and diagonally cut 13 in. tile."
I don't see a hindrance cutting 12x24" tiles on this saw. You'll need to free-hand the tile through the blade, vice using the guide, as it's rated only to 20". As long as you take your time, you shouldn't have any issues.
Two thing I strongly would recommend based upon my experience with this saw.
First, before you start cutting tile, purchase a good quality blade for the saw. The blade that comes with the saw "lost" all it's cutting particles after two cuts, rendering the blade useless.
Second...Take your cuts slow. The motor is not the most powerful. It does the job fine, and will work for you, but, just cut your tiles slowly and you'll be satisfied with the results.
Additionally...Make a cut on a scrap piece of tile. If you experience chip out's, try flipping the tile over and make another sample cut, and see how those results are.
Hope this helps out.
Read Less
+9points
10out of 11found this answer helpful.
Was this helpful?helpful10unhelpful1

Asked by
Florida
Read all my Q&A
Home Improvement Profile: DIYer
November 19, 2014
Answer: 
20 inches is the limit
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

November 19, 2014
Answer: 
I honestly would not attempt it with this saw. Can you do it? Yes. Would I do it? No. I would opt for an overhead tile saw and check the specs on the tile dimensions it can handle. Type in overhead tile saws in a search on the Home Depot website. I like my Ryobi tile saw for small tiles and up to 12x12 and the easy clean up is great. However, I also put safety first with respect to any power tool and do Read More
I honestly would not attempt it with this saw. Can you do it? Yes. Would I do it? No. I would opt for an overhead tile saw and check the specs on the tile dimensions it can handle. Type in overhead tile saws in a search on the Home Depot website. I like my Ryobi tile saw for small tiles and up to 12x12 and the easy clean up is great. However, I also put safety first with respect to any power tool and do not attempt cuts beyond it's intent. You can freehand a larger piece by not using the fence, but the fence is there for good clean, accurate cuts. Read Less
+6points
6out of 6found this answer helpful.
Was this helpful?helpful6unhelpful0
This question is from 7 in. Tabletop Tile Saw
 
7 answers

Does this come with a blade included or does it need to be purchased separately?

This question is from 7 in. Tabletop Tile Saw
Asked by
Read all my Q&A
September 16, 2015
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (7)

Asked by
Read all my Q&A
April 4, 2016
Answer: 
It comes with a blade that claims to be good for ceramic. I didn't try it on my porcelain tiles, but rather purchased an upgraded blade that was specifically for ceramic tile (better quality), so I can't speak about the original product's blade quality or longevity yet since I haven't tried it.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Louisiana
Read all my Q&A
Home Improvement Profile: DIYer
January 30, 2016
Answer: 
Comes with an average blade. If you're doing a lot of cuts it may start to wear out. I found by keeping the water near max level it kept from chipping the tile.
+2points
2out of 2found this answer helpful.
Was this helpful?helpful2unhelpful0

Asked by
Bel Air, MD
Read all my Q&A
December 14, 2015
Answer: 
Diamond wet blade is included
+2points
2out of 2found this answer helpful.
Was this helpful?helpful2unhelpful0

Asked by
Long Island, NY
Read all my Q&A
November 9, 2015
Answer: 
One blade is included but based on what your cutting there are diffrent blades for different materials
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Manteca, CA
Read all my Q&A
Home Improvement Profile: DIYer
October 20, 2015
Answer: 
Yes, this comes with a blade, but you might want to purchase a second, as they wear out pretty quickly.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Kansas City, Mo
Read all my Q&A
Home Improvement Profile: DIYer
September 18, 2015
Answer: 
Yes, it comes with a pretty decent blade.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

September 17, 2015
Answer: 
Hi JM. Yes this unit does come with a blade for you to get started!
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
This question is from 7 in. Tabletop Tile Saw
 
6 answers

will this saw handle a larger blade-8" maybe?

This question is from 7 in. Tabletop Tile Saw
Asked by
california
Read all my Q&A
January 24, 2015
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (6)

Asked by
Long Island, NY
Read all my Q&A
November 9, 2015
Answer: 
It does not appear the the opening in the table is large enough and the guard definately will not handle a larger blade. Also a large blade would require more available torgue from the motor (especially when cutting) and cause it to fail prematurely
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
NJ
Read all my Q&A
Home Improvement Profile: DIYer
August 9, 2015
Answer: 
No. This is a 7" blade saw ONLY.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Kansas City, Mo.
Read all my Q&A
Home Improvement Profile: DIYer
June 28, 2015
Answer: 
No
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Detroit
Read all my Q&A
May 20, 2015
Answer: 
No. The manual specifically says blades up to 7", and the cutout in the cutting table wont allow anything larger.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Tampa Florida
Read all my Q&A
March 3, 2015
Answer: 
It might not fit because of the design.
User submitted photo
-2points
0out of 2found this answer helpful.
Was this helpful?helpful0unhelpful2

Asked by
Fairfax, VA
Read all my Q&A
Home Improvement Profile: DIYer
January 25, 2015
Answer: 
NO. It will not. There is only about 1/4 inch of clearance between the 7" blade and the bottom of the reservoir
+2points
2out of 2found this answer helpful.
Was this helpful?helpful2unhelpful0
This question is from 7 in. Tabletop Tile Saw
 
5 answers

Will it cut through granite floor tile?

This question is from 7 in. Tabletop Tile Saw
Asked by
MI
Read all my Q&A
February 23, 2015
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (5)

Asked by
Long Island, NY
Read all my Q&A
November 9, 2015
Answer: 
Your limits on this saw seem to be the thickness of the tile, too thick may not fit under the guard. and I would think you may/will need a different blade
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Kansas City, Mo.
Read all my Q&A
Home Improvement Profile: DIYer
June 28, 2015
Answer: 
Yes
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Tampa Florida
Read all my Q&A
March 3, 2015
Answer: 
I'm sure it would but you might have to cut the tiles a little slower
User submitted photo
User submitted photo
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

February 25, 2015
Answer: 
Yes, this will cut granite tiles, up to 1.25 inches thick.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Fairfax, VA
Read all my Q&A
Home Improvement Profile: DIYer
February 24, 2015
Answer: 
Yes, It works as well as my Big 10 inch QEP contractor wet saw .(just a little slower)
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
2 3 »
  • 2016-10-31 T16:56:32.878-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_205049842, prod, sort_default
2 3 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 65ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 3.8 out of 5 by 88 reviewers.
Rated 5.0 out of 5.0 by Great, Affordable Tile Saw This is a great saw for it's relatively low price. I recently used this tile saw while remodeling my guest bathroom. The assembly was pretty straight forward and I had the saw up and running in about 20 minutes. Side Note: I invested in a top tier tile blade instead of using the one that came with the saw. In my experience, the stock blades that come with saws aren't always the best quality. For a few extra dollars, you can buy a much better blade that will make the job infinitely easier. I don't think this would be the best saw for a large, industrial project. However, for smaller, home projects, this saw is a great buy. September 19, 2016
Rated 3.0 out of 5.0 by only for small tiles i needed to cut medium size tiles and it sucked. No power, and difficult to move the tile forward. Couldnt cut a single tile straight. I guess my complain is more about that technology than this product in particular. You really need a moving base or moving saw. October 4, 2016
Rated 5.0 out of 5.0 by Great product at the price paid Used to cut ceramicsubway tile for a large kitchen back splash. The Saw and guide made smooth straight cuts with ease. Assembly couldn't be easier. If you need a tile saw and don't want to spend a ton, buy this one. September 13, 2016
Rated 5.0 out of 5.0 by Kitchen floor Typical do-it-yourself guy. Recently done my kitchen floor with porcelain tile and it never missed a beat. Very nice saw for the price. Highly recommend for personal use. September 25, 2016
Rated 2.0 out of 5.0 by Power Switch Not sure what's up but this is the second one I've replaced all because the power switch keeps coming off. Not Good when your in the middle of a job! April 19, 2016
Rated 1.0 out of 5.0 by junk ,junk ,junk don't waste you're money went thru 3 and could not find one that the motor wasn't mounted crooked .. It ruined tile and cut crooked ... Finally went to store and checked 2 more ,,,,,,,,, out of a total of 5 all 5 were junk ..***.WARNING *** STAY AWAY FROM THIS SAW !!!!!! IT IS JUNK September 18, 2016
Rated 4.0 out of 5.0 by Works well! I bought this and a glass cutting blade to cut a glass mosaic tile for a backsplash. It worked well and would recommend this to others. I don't know if I would have tried cutting the glass without the special blade though. I didn't want to risk ruining the material. I'm sure it would get by but not without chipping. September 13, 2016
Rated 1.0 out of 5.0 by Maybe ok for small jobs and thin tile. Overall, waste of time and money. Unless your buying this for small projects, don't waste your time. Get a real wet tile saw. This one has no weight to it and even with the sharpest blade the whole system moves all over the place. The motor is to weak for the ceramic tile I attempted to cut. I have up after 5 pieces. There were so many chips in the edge due to a weak motor. The nut on the blade stays tight for only for a few cuts before you have to open the thing up to retighten. Save yourself the frustration, rent a real saw. August 24, 2016
  • 2016-10-31 T00:54:38.455-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_88, tr_88
  • loc_en_US, sid_205049842, prod, sort_default
2 3 4 >>
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 33ms
  • REVIEWS, PRODUCT