0044315268700

Simpson Strong-Tie

Model # LUS28Z

Internet # 100374921

Store SKU # 865858

Z-MAX 2 in. x 8 in. Galvanized Double Shear Face Mount Joist Hanger

$1.11 /each

FREQUENTLY BOUGHT TOGETHER

PRODUCT OVERVIEW

Model # LUS28Z

Internet # 100374921

Store SKU # 865858

Store SO SKU # 592854

Joist hangers are designed to provide support underneath the joist, rafter or beam to provide a strong a connection. Simpson Strong-Tie offers a diverse line of hangers to handle almost any application with top flange, concealed flange and field skewable and slopeable options. LUS joist hangers provide a connection between a joist and header.

  • Patented double-shear nailing design provides greater strength with fewer nails
  • Speed prongs for fast and easy installation
  • Angled joist nailing easier in tight spaces
  • Do not bend or remove tabs
  • Fits Joist Size: 2 in. x 8 in. and 2 in. x 10 in.
  • Made from 18-Gauge steel
  • Z-MAX galvanization offers extra corrosion resistance for exterior and treated-wood applications
  • Install with 10d common nails or #9 x 2-1/2 in. Strong-Drive SD screws

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

SPECIFICATIONS

Dimensions
Product Depth (in.) 
6.625 
Product Height (in.) 
Product Width (in.) 
3.563 
Details
Gauge 
18 
Material 
Steel 
Number of Pieces 
Product Weight (lb.) 
0.362 lb 
Returnable 
90-Day 
Warranty / Certifications
Manufacturer Warranty 
Visit our website at strongtie.com and type in warranty in the search box for detailed warranty information 

MORE PRODUCTS WITH THESE FEATURES

Price: $0 - $10
Brand: Simpson Strong-Tie
Review Rating: 4 & Up
Search
4 Questions7 Answers

Customer Questions & Answers

Z-MAX 2 in. x 8 in. Galvanized Double Shear Face Mount Joist Hanger
Z-MAX 2 in. x 8 in. Galvanized Double Shear Face Mount Joist Hanger

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
 
3 answers

DO YOU HAVE A HANGER THAT IS AT AN ANGLE FOR CENTER BEAM AND RAFTERS

This question is from Z-MAX 2 in. x 8 in. Galvanized Double Shear Face Mount Joist Hanger
Asked by
RICK
September 8, 2011
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (3)

Asked by
duluth ga
Read all my Q&A
May 2, 2014
Answer: 
check the website under hardware there is a pdf file with all available products with drawings and info.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Marietta, GA
Read all my Q&A
January 15, 2013
Answer: 
The Simpson Company surely makes one. Every Home Depot has the book so you can look through it and order the right bracket if it is not a regularly stocked item.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Pleasanton, CA
Read all my Q&A
September 13, 2011
Answer: 
The LSU/LSSU hangers shown at the following link are field adjustable to a maximum 45-degree slope and/or skew: http://www.strongtie.com/products/connectors/LSU-LSSU.asp.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
 
2 answers

how wide are the hangers

This question is from Z-MAX 2 in. x 8 in. Galvanized Double Shear Face Mount Joist Hanger
Asked by
pete
August 8, 2013
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

Asked by
duluth ga
Read all my Q&A
May 2, 2014
Answer: 
mount plate to header is installed about 5-6" wide at top and about 3" at bottom.
-5points
0out of 5found this answer helpful.
Was this helpful?helpful0unhelpful5

Asked by
Pleasanton, CA
Read all my Q&A
August 16, 2013
Answer: 
Pete,
The LUS28Z is sized to carry a 2x8 or 2x10 joist; the width in the stirrup is 1 9/16" (with a tolerance of +1/16"/-0). The overall width of the hanger is about 3.67".
Thank you!
+3points
3out of 3found this answer helpful.
Was this helpful?helpful3unhelpful0
 
1 answer

Can I use this hanger positioned back to back on either side of a 2x8? Will the screws interfere with each other?

This question is from Z-MAX 2 in. x 8 in. Galvanized Double Shear Face Mount Joist Hanger
Asked by
Read all my Q&A
January 19, 2016
It is for blocking that cannot be staggered between joists on my deck. I am hesitant to use a saddle hanger as I don't want the extra material on top of the joist.
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

February 1, 2016
Answer: 
There would be concern of fasteners interfering with eachother when installed on both sides of a single 2x member. The RR Ridge Rafter connector is the connector we refer to for this condition. Thank you!
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
 
1 answer

Is there a joist hanger for full dimension rough cut 2x8's?

This question is from Z-MAX 2 in. x 8 in. Galvanized Double Shear Face Mount Joist Hanger
Asked by
Newcastle, wyoming
Read all my Q&A
July 6, 2015
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

July 7, 2015
Answer: 
Yes, please see the LU28R-18 or U26R. Thank you!
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
1 of 1
  • 2016-05-20 T13:49:09.804-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_100374921, prod, sort_default
1 of 1
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 60ms
  • QUESTIONS, PRODUCT

CUSTOMER REVIEWS

Rated 5.0 out of 5 by 4 reviewers.
Rated 5.0 out of 5.0 by Do the Job They do the job. Just finished a deck, used approx. 100 with no problems. April 23, 2016
Rated 5.0 out of 5.0 by did the job. Very satisfied with this product. It did exactly what it was intended for. February 16, 2016
Rated 5.0 out of 5.0 by solid item for hanging joist you will need a few items when installing ie: 10dx1 1/2" nails to mount to a 2x6 or 2X8 header and i found out 1/2 way thru my tasks that the ange mount holes for joist it self will need 10d x 2 1/2" nails my task was a deck and all fastners are galvinized. since im doing a repair/replacement of all joists and deck boards it has been neccessary to support joist from existing and new joists to allow proper placement .one end is 2ft form earth other is over 12 feet from earth . so clamped hanger to joist end with c- clamp to allow correct mounting ,I dicovered that short fall end needs to be nailed on one side only at correct placement first which allows free movement of high end.highend once situated in proper placement can then be fully mounted on both sides to hesder (leave side angles till last to allow joist to settle when finishing other end . be safe and good luck. May 2, 2014
Rated 5.0 out of 5.0 by Works as advertised The joist hangers work as advertised, I will highly recommend. January 15, 2013
  • 2016-05-19 T16:33:38.978-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_4, tr_4
  • loc_en_US, sid_100374921, prod, sort_default
1-4 of 4
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 34ms
  • REVIEWS, PRODUCT