Model # HOM612L100FCP

Internet #100149777

Store SKU #626441

Square D Homeline 100 Amp 6-Space 12-Circuit Indoor Flush Mount Main Lug Load Center with Cover No Door
0047569071249

Square D

Homeline 100 Amp 6-Space 12-Circuit Indoor Flush Mount Main Lug Load Center with Cover No Door

  • For residential or commercial power distribution
  • Fixed Main Lugs Configuration
  • 10 Year Residential Warranty
$17.64 /each

Frequently Bought Together

Product Overview

The Square D Homeline 100 Amp 6-Space 12-Circuit Indoor Flush Mount Convertible Main Lugs Load Center is UL listed for residential and commercial power distribution. This load center is built with a plated, aluminum bus bar that is tested and listed only for Homeline circuit breakers. Homeline load centers are designed for the value-minded contractors, remodelers, builders and homeowners. Homeline load centers are engineered for fast installation and wire savings.

  • Includes flush mount cover without a door
  • Accommodates plug-on secondary surge arrestor (sold separately)
  • Overhead/underground feed simply by rotating the device before installing
  • Single phase
  • Rated 120/240 VAC and 10,000 AIR short circuit current rating
  • Flush mount device cover without a door
  • Thermoplastic interior assembly is among the most rugged in the industry
  • Slot/square drive screws let you use either standard flat blade screwdriver or square-head driver for positive drive and proper torque
  • 3 ground bar mounting locations (left, right and end) let you pick the easiest spot to wire
  • Learn More About Electrical Panels Here in our Buying Guide.

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

5 Questions11 Answers

Customer Questions & Answers

Homeline 100 Amp 6-Space 12-Circuit Indoor Flush Mount Main Lug Load Center with Cover No Door
Homeline 100 Amp 6-Space 12-Circuit Indoor Flush Mount Main Lug Load Center with Cover No Door

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
 
3 answers

How do I connect the incoming LOAD?`

This question is from Homeline 100 Amp 6-Space 12-Circuit Indoor Flush Mount Main Lug Load Center with Cover No Door
Asked by
Austin, Texas
Read all my Q&A
September 26, 2015
Since there is no 'wiring diagram'.... I can't remember where white , black or the bare ground should be connected. Incoming #8 wires. I know its the big lugs on the top side but which should go to which #220v incoming# .....Thanks
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (3)

Asked by
San Diego, CA
Read all my Q&A
Home Improvement Profile: DIYer
November 27, 2015
Answer: 
This panel is wired the same as all the rest residential 220v single phase service,.
1. as a main lug - the two hot wires Red / Black connect to each of the main lugs that feed the breakers.
The white common /neutral goes to the buss bar with all the screws and holes in the center above the breakers along with the ground wire to the same bar.
2. or wire as a subpanel - same as above EXCEPT you must Read More
This panel is wired the same as all the rest residential 220v single phase service,.
1. as a main lug - the two hot wires Red / Black connect to each of the main lugs that feed the breakers.
The white common /neutral goes to the buss bar with all the screws and holes in the center above the breakers along with the ground wire to the same bar.
2. or wire as a subpanel - same as above EXCEPT you must purchase the Ground Bar Kit part # PK7GTA sold at Home Depot for ~ $5. It has 4 optional mounting locations on the same plane as the neutral bar at any of the 4 corners. Connect the service feed and all branch circuits ground wires here.
3. Optional - In either configuration "backfeed" a Main shut shutoff breaker. Look up for easy instructions. Read Less
User submitted photo
+3points
3out of 3found this answer helpful.
Was this helpful?helpful3unhelpful0

September 28, 2015
Answer: 
Please contact qualified licensed electrician for installation assistance.
-1point
0out of 1found this answer helpful.
Was this helpful?helpful0unhelpful1

Asked by
michigan
Read all my Q&A
Home Improvement Profile: DIYer
September 28, 2015
Answer: 
this is not a 220V 2 phase panel, it's 110V single phase, so you should only have an incoming black and white wire set. The black wire will go to the lug that feeds the common rail/bus that the circuit breakers lock onto, and the white wire to the neutral bus bar on the side with all the screw terminals. Your ground wire coming from the grounding system will hook up to the grounding bar (like the neutral Read More
this is not a 220V 2 phase panel, it's 110V single phase, so you should only have an incoming black and white wire set. The black wire will go to the lug that feeds the common rail/bus that the circuit breakers lock onto, and the white wire to the neutral bus bar on the side with all the screw terminals. Your ground wire coming from the grounding system will hook up to the grounding bar (like the neutral bus bar but has a smaller lug.) Since this is a load center with no main breaker, it should only be fed from an appropriate 100a single phase breaker on your main panel. If you want to feed with 2-phase power, you'll need a different load center, one that has two separate rails feeding the circuit breakers, one for each phase. In that case, you usually have a red, black and white wire set. red goes to one feeder rail, black to the other, and white to the neutral bus bar. Read Less
-13points
2out of 17found this answer helpful.
Was this helpful?helpful2unhelpful15
 
2 answers

Will this panel accept tandem breakers

This question is from Homeline 100 Amp 6-Space 12-Circuit Indoor Flush Mount Main Lug Load Center with Cover No Door
Asked by
Arizona
Read all my Q&A
February 18, 2016
I only have one slot open on my breaker panel (same model as this one) and need to add a 30 amp 220v breaker for an air compressor. Other than replacing it with a new panel, I would like to group two of the 20 amp circuits on a tandem breaker.
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

Asked by
Orem, UT
Read all my Q&A
Home Improvement Profile: Professional
April 3, 2016
Answer: 
Grouping two of your existing 20 amp circuits on a tandem breaker will open up two adjacent slots for the new 30 amp breaker to connect to both L1 and L2 to give you the 220 / 240v you need.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Arizona
Read all my Q&A
February 20, 2016
Answer: 
Answered my own question...All 6 positions will accept tandem breakers for a total of 12 circuits
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
2 answers

What are the dimensions of cover for panel?

This question is from Homeline 100 Amp 6-Space 12-Circuit Indoor Flush Mount Main Lug Load Center with Cover No Door
Asked by
Texas
Read all my Q&A
October 8, 2014
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

Asked by
San Diego, CA
Read all my Q&A
Home Improvement Profile: DIYer
November 27, 2015
Answer: 
I just measured the cover on my panel: 10 1/8" x 13-13/16".
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

October 20, 2014
Answer: 
Approximate dimensions for the cover of HOM612L100FCP are 10.08'' by 13.77''. The cover will overlap the load center enclosure by .60'' on all sides.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
2 answers

what size wire to use for 100amp sub panel with 100amp breaker from main panel

This question is from Homeline 100 Amp 6-Space 12-Circuit Indoor Flush Mount Main Lug Load Center with Cover No Door
Asked by
PA
Read all my Q&A
August 23, 2014
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

Asked by
San Diego, CA
Read all my Q&A
Home Improvement Profile: DIYer
November 27, 2015
Answer: 
#3 AWG COPPER (not aluminum) Stranded wire: THWN-2, THHN, rated to 90°C (194°F) which supports up to 115A the next smaller wire is rated at 95A.
"http://www.cerrowire.com/ampacity-charts"
User submitted photo
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

August 29, 2014
Answer: 
Main wire size for HOM612L100FCP is #8 to #1 AWG Al/Cu.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
2 »
  • 2016-10-30 T23:10:14.863-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_100149777, prod, sort_default
2 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 42ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 3.0 out of 5 by 1 reviewer.
Rated 3.0 out of 5.0 by A mix of good and bad... Installed as a subpanel Nov 2015 Square D Homeline panel review: Great panel / system but there are some issues to address; is this a punishment for choosing the "Home-lIne" at a big box store vs electrical supply store? I needed to replace a 4 breaker GE Slim-line TQL with one that had more slots and the ability to run a two-pole breaker for a 220v feed to an additional sub-panel. WHY: I prefer Cuttler-Eaton (C-E) and own two: a main panel and two sub panels. I like to have the same brand panel and breakers. By code, even when a panel accepts different brand breakers the brand is supposed to be the same for both. In this case Home Depot did not sell a panel that fit the narrow dimension in the C-E brand so this was the only choice offering flush mount and indoor use. I also didn't need a door and limited room for a door to open. NOTE: If used as a sub-panel you will need the optional ground bus bar kit PK7GTA. Its offered in small, medium and large at Home depot for $4 to $7. There are 4 mounting points in the corners of the panel. GOOD: Excellent quality box, fit and finish, paint, etc. Knockouts - I used my Estwing starter nail pry bar and hammer to knock them out. It took two really hard hits then wiggle with a pliers. All snapped off clean, same with the breaker slots. Breaker fit - breakers are extremely secure once mounted. Much, much tighter then the GE slim-line and about 30% tighter than the standard Cuttler Eaton panels that I normally use. Price / Value - Installed a Quad breaker which was 30A two-pole in the center and two 20A narrow Tandem style breakers on each edge for a total of 3 circuits. This cost ~ $19.48 + tx which was cheaper than purchasing a separate 30A two pole, and two 20A single pole breakers AND saved space taking up 2 slots vs 4 and looks cool. BAD (but not a deal breaker) 1. Quad Breaker - uses #2Square Drive for the two 20A breakers but uses the dated Slotted screws in the center - huh? Why not use the universal #2 SQ drive? Why return the ancient mostly no longer used slotted screws? 2. Quad Breaker - Had to push harder than any breaker I have ever installed in any brand of panel including a modern double pole, two "slot" 60A Zinco (type UZI) breaker. I had to push so hard I though I was going to either break the panel or push it through the wall. I was afraid of breaking or weakening the plastic rail on the bottom that the breaker sits in and pivots on. I removed and reseated the breaker a few times to make sure I had it seated properly. It went in a little more smoothly the second and third time. Also, breakers were newly purchased in the "tripped" position and were had contact grease on them. Inserting the wires is often difficult to see visually when the breaker is installed however twice when I inserted the 10 gauge wire in the center 30A breaker and tighten the slotted screw it fell out. I looked carefully with a flashlight and saw the that wire was not under the screw and slipped behind the screw into a tiny space so that the wire went inside? the breaker. I can't remember having that problem with other breakers. 3. Single pole 15/20A Breakers - odd design that appears to accept two wires in a curved guide - one on each side of the screw. The wire needs to be inserted right or left of center. I prefer the standard way that Cuttler-Eaton, Murry, and most breakers use and I don't really see much benefit in this and it doesn't feel as durable. Again, not a deal breaker. 4. Instructions - Subpanel - Ground bus bar kit. I didn't find any reference to this in the instructions and only found the ground buss bar kit mentioned on the outside of the box. Because this is a very small panel the chances are quite high that the installer will be using it as a subpanel. The instructions should cover this basic common alternative setup vs a main panel aka "Main Lug" that this and most other brands ship as. Although, I am aware of this I don't install panels very often so I needed a reminder. November 15, 2015
  • 2016-10-30 T21:22:52.151-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_1, tr_1
  • loc_en_US, sid_100149777, prod, sort_default
1-1 of 1
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 37ms
  • REVIEWS, PRODUCT