Tapcon 3/16 in. x 2-3/4 in. Climaseal Steel Flat-Head Phillips Concrete Anchors (75-Pack)-24365 - The Home Depot
Message to Our Customers
Discontinued

Tapcon

Model # 24365

Internet # 100194089

Store SKU # 460247

3/16 in. x 2-3/4 in. Climaseal Steel Flat-Head Phillips Concrete Anchors (75-Pack)

Tapcon 3/16 in. x 2-3/4 in. Climaseal Steel Flat-Head Phillips Concrete Anchors (75-Pack)
 

This item has been discontinued.
The Home Depot no longer carries this specific product.

$16.82 / each
Loading...

PRODUCT OVERVIEW

Model # 24365

Internet # 100194089

Store SKU # 460247

Tapcon 3/16 in. x 2-3/4 in. Climaseal Steel Flat-Head Phillips Concrete Anchors (75-Pack) are perfect for fastening into concrete, block, or brick. The anchors are approved for use with treated lumber and are Climaseal coated for corrosion resistance. Reversible and removable. Easy drill-and-drive installation.

  • Designed for fastening applications in concrete, block, or brick
  • Use to attach electrical equipment, downspout straps, hose reels, flagpoles and hurricane shutters
  • Approved for treated lumber
  • 2-3/4 in. long and 3/16 in. wide
  • Climaseal coated for corrosion resistance
  • Blue finish
  • Made in USA

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

SPECIFICATIONS

Dimensions
Assembled Depth (in.) 
.1875 in 
Assembled Height (in.) 
2.75 in 
Assembled Width (in.) 
.1875 in 
Fastener Diameter 
3/16" 
Fastener length (in.) 
2.75 
Details
Fastener Head Style 
Flat 
Fastener Plating 
Polymer 
Fastener Type 
Masonry Anchor 
Fastener/Connector Material 
Steel 
Finish Family 
Blue 
Indoor/Outdoor 
Indoor/Outdoor 
Maximum Weight Capacity (lb.) 
Measurement Standard 
SAE 
Package Quantity 
75 
Primary Use 
Fastening applications in concrete, block, and brick 
Product Weight (lb.) 
.016 lb 
Returnable 
90-Day 
Warranty / Certifications
Manufacturer Warranty 
ITW Brands warrants that this product is free from defects in material and workmanship. ITW Brands' sole liability for any breach of this warranty shall be to replace this product or refund the purchase price. 

CUSTOMER REVIEWS

Rated 4.3 out of 5 by 3 reviewers.
Rated 3.0 out of 5.0 by Bit is Worthless The included bit lasted for exactly 2 holes before it was too dull to use any more. Save a headache and buy yourself a high quality bit for use with these Tapcons. April 13, 2015
Rated 5.0 out of 5.0 by Rotary hammer drill required These screws work great as long as you have the right tools for the job. A cordless hammer drill will not work for these screws at the 2 3/4 inch length. Save yourself the trouble and buy or rent a corded rotary hammer drill, it will save you a ton of time and make a much cleaner hole. These screws will strip the hole very quickly if you are not careful. Take your time when screwing them in and be careful not to over torque them. DO NOT use a ratcheting drill driver for these screws. November 28, 2011
Rated 5.0 out of 5.0 by Treat very gently I agree with ModernTimercrafts review – you should get a hammer drill – go get a $25 drill from ”that store where you dock your boat” and use the supplied bit. And he’s right these have a very touchy “brake-away point” You can crank down on these and they’ll hold like gang-busters but just a little bit past that and “pop” - strips out and you’ll be drilling a new hole. It took me about 5-6 screws to get the finesse of it then I was off and running. I recommend you DO use an 18V ratcheting drill-driver to drive the screws! Having the clutch is the only way you have some guarantee the screws won’t strip out. For drilling the holes - the other reviewer is right – deeper holes should be left for an industrial hammer-drill. Also the Condrive500 installation tool is a waste for the same reasons – unless your hammer drill has a clutch you’ll strip out every screw. I had a cheap corded hammer drill w/o a clutch so a maybe that’s why it didn’t work right for me. I thought the tube had a torque limiter like torque extensions used for lug-nuts but it doesn’t - I ended up switching off two drills – slower but no striped screws. All in all these are great! August 19, 2013
  • 2015-05-25T11:36:48.367-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_3, tr_3
  • loc_en_US, sid_100194089, prod, sort_default
1-3 of 3

SHIPPING AND DELIVERY OPTIONS

Store Exclusive. This item is available for purchase in select stores only.