Free Shipping and BOPIS

Model # 920924

Internet # 100054132

Store SKU # 920924

T&G Oriented Strand Board (Common: 23/32 in. x 4 ft. x 8 ft.; Actual: 0.703 in. x 47.75 in. x 95.75 in.)

This item has been discontinued.
The Home Depot no longer carries this specific product.

$13.38 /each


Model # 920924

Internet # 100054132

Store SKU # 920924

TruFlor 4 ft. x 8 ft. T&G panels are ideal for the sub-floor construction of residential single and multi family houses as well as light commercial construction and modular mobile homes. TruFlor rated structural panels are manufactured using wood strands and waterproof adhesives, and do not contain added urea-formaldehyde resins. The wood strands are arranged in cross-oriented layers to provide strength and performance properties similar to equivalent thicknesses of plywood. The result is a structural engineered wood panel that is consistent in quality with no core voids. No special tools are required to work with the panels. TruFlor sub-floor panels, with a grade stamp, are certified by the APA (The Engineered Wood Association) to ensure the quality is built into every panel and that it meets North American building codes. TruFlor panels are face stamped and have an edge color for easy identification by builders & remodelers to show that quality products are being used.

California residents: see  Proposition 65 information

  • TruFlor provides the quality and performance to reduce costs and cycle times. Ideal for the professional builder, remodeler or the do-it-yourselfer. Panels install easily with less wear and tear on tools and equipment
  • TruFlor engineered OSB T&G panels utilize an improved resin formulation and quality control protocol. Lightly join T&G edges and allow for 1/8 in. space on square ends
  • TruFlor is an APA grade stamped 4x8 T&G subfloor panel. Maximum support spacing 24 in. OC on floor applications
  • TruFlor comes with a 25 year limited warranty and meets or exceeds PS 2-10 standards
  • Ideal for subfloor application in residential single and multi-family homes, light commercial construction and modular mobile homes
  • Note: Product may vary by store


Actual product thickness (in.) 
Actual product width (in.) 
Product Depth (in.) 
Product Height (in.) 
Product Length (ft.) 
8 ft 
Product Thickness (in.) 
23/32 in 
Product Width (ft.) 
Product Width (in.) 
Plywood Type 
Pressure Treated 
Tounge and Groove 
Warranty / Certifications
Manufacturer Warranty 
See store for details 


Rated 3.1 out of 5 by 15 reviewers.
Rated 5.0 out of 5.0 by Outstanding Flooring for Anything! This stuff is amazing! It's sturdy & heavy with the bonus of waterproof adhesives when made, made it a perfect choice for my Shed. No problems with the tongue & groove... I just used a block of 2x4 & a small 4lb hammer to tap the panel to a tight fit. Decided to weather proof the floor with Henry 587 Dura-brite White Elastomeric roof coating... Just because I knew I wouldn't get the shed all done before it rained on me... It has held up very well over the past 4 months of construction. I liked the marking on the OSB made it easier to square up & install correctly! August 1, 2015
Rated 4.0 out of 5.0 by Great Great quality. Flooring was even, sturdy and no flaws November 19, 2013
Rated 4.0 out of 5.0 by Flooring OSB This OSB was exactly what I expected. It was good quality with little to no damage in handling. July 29, 2014
Rated 3.0 out of 5.0 by Tongues and Grooves do not fit together properly, seemed bowed Overall a decent product, with consistent dimensions, but the tongues and grooves do not fit together properly. They would make full contact at both ends, and leave a gap in the middle on every piece. April 8, 2014
Rated 4.0 out of 5.0 by Good product, fine for my application People need to realize that the width of a tongue-and-groove product INCLUDES the width "lost" for the tongue. Same is true for tongue and groove boards. So if your floor is an even multiple of 4 feet you will, indeed, need more that one sheet to cover that 4 foot space so plan accordingly!. As a side note, the sheets must NOT be installed with the tongue and groove joint on the joists. That's where the ends should butt together (leaving about 1/8 in gap - use a nail slipped between the sheet ends as a spacer). The t-g joint provides the "support" between joists. March 31, 2013
Rated 4.0 out of 5.0 by Size not a big issues if installed properly This product is designed to be installed with the 8' side perpendicular to the joists (at right angles). If installed this way will hit all 16" oc members. If installed 8' parallel to the joists will miss 16 oc. The tongue is designed to support the span between joists. You will come up short on the 4' dimension as noted in other reviews. Just factor in when ordering. September 7, 2012
Rated 4.0 out of 5.0 by Did the job with no fuss Changed a room with an absurdly high ceiling into a normal-height room with an attic. Used several sheets of this OSB for the flooring. The only hitches were because of my complete inexperience (installed up-side-down, tried to defeat the built-in 1/8" gap between sheets). The board was easy to handle and cut. Screws did find a couple small voids, but not enough to compromise strength of construction. I have no doubt the floor will hold up to whatever I cram into my new attic. June 11, 2014
Rated 3.0 out of 5.0 by Product was good for purpose Use to floor an attic area above a garage. Some of the tounge and grooves were damaged and required some clean up but worked. November 22, 2011
  • 2015-08-03T11:55:12.999-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_15, tr_15
  • loc_en_US, sid_100054132, prod, sort_default
2 >>


Store Exclusive. This item is available for purchase in select stores only.