Workforce 43 in. Steel Roller Stand with Edge Guide (5-Pack)-AC43 at The Home Depot
Discontinued

Workforce

Model # AC43

Internet # 202530462

Store SKU # 483048

43 in. Steel Roller Stand with Edge Guide (5-Pack)


Workforce 43 in. Steel Roller Stand with Edge Guide (5-Pack)
 

This item has been discontinued.
The Home Depot no longer carries this specific product.

$24.97 / each
Loading...

PRODUCT OVERVIEW

Model # AC43

Internet # 202530462

Store SKU # 483048

It is a smooth action ball bearing roller. Its loading capacity is 250 lbs. It is used with table saw, band saw, chop saw or planer.

  • 11-1/2 in. wide x 2 in. diameter
  • Flip-up guides for stock alignment
  • Folds flat for storage or transport
  • Moves long, wide, heavy materials

SPECIFICATIONS

Assembled Depth (in.)  19.69 in  Assembled Height (in.)  43.50 in 
Assembled Width (in.)  12.68 in  Bench & Stationary Tool Type  Accessory 
Manufacturer Warranty  90 Day Return Policy  Power Tool Product Type  Bench & Stationary 
Product Depth (in.)  19.69  Product Height (in.)  43.5 
Product Weight (lb.)  11.7 lb  Product Width (in.)  12.68 
Returnable  90-Day 

CUSTOMER REVIEWS

Rated 2.9 out of 5 by 12 reviewers.
Rated 4 out of 5 by Should have bought 2 a little top heavy since the first time I used it I knocked it over (which isn't what you want to happen while in mid cut) but it was my fault for not positioning it right, however I didn't know where to position it on it's first use. I was close though :) Should have bought 2. One for the cut side and one for the scrap side. August 12, 2014
Rated 5 out of 5 by great purchase the roller stand easy no assembly required good quality does what it suppose to do would buy again September 20, 2014
Rated 5 out of 5 by Inexpensive, solid Used this stand once. I had Home Depot rip 8 4'x8' 3/4 inch maple plywood sheets into 1'x8' boards. then using my table saw on my deck I further ripped another 1' off the boards. I used this stand to help. The boards went thru the table saw and smoothly ran out and over this stand. The stand is solid, made of a strong aluminum and the roller turns easily and smoothly. Good value for the price. August 26, 2014
Rated 5 out of 5 by Don't understand why I waited so long to purchase one. Always wanted to get one, waited and waited;;;;;; Now I ask myself WHY did I wait. Very useful. October 22, 2014
Rated 2 out of 5 by Does the job, but beware I needed something for the 'today' project and couldn't wait to get something else by mail. Luckily there was already a review about the quality so I took a look in the mix at my local HD. Some were falling apart as I picked through them and definitely one was sloped after setting it up. I managed to pick a decent one and it's doing the job. Just make sure you get one that sets up properly before purchasing and you might be okay. Also, the pin that holds the roller and comes out the side to hold the guides slides to much in one direction and you have to make sure there is enough out on each end to allow the guides to latch on. Total flaw. October 23, 2013
2 >>

SHIPPING AND DELIVERY OPTIONS

Standard Shipping includes delivery by small parcel service. Processing time varies by product.


Orders for this item may be expedited for an additional fee.


Other Delivery Options:

Express and Expedited shipping options are also available. Estimated arrival times are available in checkout.


If product is eligible for shipping to AK, HI and US Territories additional transit time and remote surcharges may apply.