Model # OCR19X C1

Internet #202047058

Store SKU #235674

null 1/2 in. Nominal Compression Inlet x 3/8 in. O.D. Compression Outlet Multi-Turn Angle Valve
0026613135786

1/2 in. Nominal Compression Inlet x 3/8 in. O.D. Compression Outlet Multi-Turn Angle Valve

$7.87 /each

Frequently Bought Together

Product Overview

BrassCraft 1/2 in. Nominal Compression Inlet x 3/8 in. O.D. Compression Outlet Multi-Turn Angle Valve controls water flow to household plumbing fixtures - faucets, toilets, dishwashers, icemakers, washing machines, etc. The straight valve is most often used where the water pipe enters the room from the floor. With a few turns of the valve handle, you are able to stop the flow of water leading to the plumbing fixture, allowing for maintenance and repair without turning off water to the entire home.

  • Compatible with copper or PEX (PEX installations require a stainless steel tube insert)
  • Machined, 1-piece body construction for strength, durability and long-lasting performance
  • Easy-to-remove handle protects against accidental operation during rough-ins
  • Multi-turn operation means water flow control with only a few turns of the handle
  • Oval-knurled handle provides a secure grip for on/off operation
  • Chrome-plated brass
  • Temperature rating: 40 Degree to 140 Degree
  • Pressure rating: 125 psi maximum
  • No-lead certified
  • IAPMO and CSA listed to ASME A112.18.1/CSA B125.1

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

7 Questions9 Answers

Customer Questions & Answers

1/2 in. Nominal Compression Inlet x 3/8 in. O.D. Compression Outlet Multi-Turn Angle Valve
1/2 in. Nominal Compression Inlet x 3/8 in. O.D. Compression Outlet Multi-Turn Angle Valve

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
 
4 answers

my replacement shut off valves are leaking how do I stop the leak?

This question is from 1/2 in. Nominal Compression Inlet x 3/8 in. O.D. Compression Outlet Multi-Turn Angle Valve
Asked by
mzone45
March 23, 2013
I have copper lines coming out of the wall with nut and a compression washer that has the shut off valve screwed into it. The old valves had to be replaced so i bought new valves put the white tape on the threads screwed them in but they leaked. I have repeated the process a few times but no success. What must I do to stop the leak?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (4)

Asked by
Calif
Read all my Q&A
May 14, 2013
Answer: 
1) Compression fittings do not get tape put on them. The seal is accomplished by compressing the ring or ferrule thru tightening of the nut, in effect squishing the ring around the pipe. Gently try to tighten the nut. It is critical to avoid over-tightening the nut or else the integrity of the compression fitting will be compromised by the excessive force. If the nut is overtightened the ferrule will Read More
1) Compression fittings do not get tape put on them. The seal is accomplished by compressing the ring or ferrule thru tightening of the nut, in effect squishing the ring around the pipe. Gently try to tighten the nut. It is critical to avoid over-tightening the nut or else the integrity of the compression fitting will be compromised by the excessive force. If the nut is overtightened the ferrule will deform improperly causing the joint to fail. A good rule of thumb is to tighten the nut first by hand until it is too difficult to continue and then tighten the nut one half-turn more with the aid of a wrench; the actual amount varies with the size of the fitting, as a larger one requires less tightening. The fitting is then tested: if slight weeping is observed, the fitting is gradually tightened until the weeping stops. Read Less
+5points
5out of 5found this answer helpful.
Was this helpful?helpful5unhelpful0

Asked by
Greater Chicagoland
Read all my Q&A
April 2, 2013
Answer: 
I would suggest replacing the compression ring. You probably over tightened and distorted the copper ring. The copper ring or sleeve should be readily available in plumbing parts and cost no more than a buck. Don't over tightened. Hand thread first and tighten slowly. Stop when you get resistance. Turn on water and check for leaks. If leaking, tightened it a little and check again. Note, given it is a Read More
I would suggest replacing the compression ring. You probably over tightened and distorted the copper ring. The copper ring or sleeve should be readily available in plumbing parts and cost no more than a buck. Don't over tightened. Hand thread first and tighten slowly. Stop when you get resistance. Turn on water and check for leaks. If leaking, tightened it a little and check again. Note, given it is a compression fitting, you should not need Teflon tape.
I would also recommend cleaning the pipe where the compression ring rests. Read Less
+2points
2out of 2found this answer helpful.
Was this helpful?helpful2unhelpful0

March 26, 2013
Answer: 
Mzone,
We are sorry you are having troubles with the valve replacement.
From the description of your issue it sounds like you have reused the compression nut and ring when you replaced the old valve. BrassCraft does not recommend the reuse of those components as they are altered with installation. We recommend cutting the copper tubing off near the old compression nut and installing the stop per the
Read More
Mzone,
We are sorry you are having troubles with the valve replacement.
From the description of your issue it sounds like you have reused the compression nut and ring when you replaced the old valve. BrassCraft does not recommend the reuse of those components as they are altered with installation. We recommend cutting the copper tubing off near the old compression nut and installing the stop per the instructions printed on the inside of the package. Please note that after cutting off the old compression nut and ring you must still have an inch of copper tubing to install the new stop.
If you require additional instructions please call our Product Experts at 877-272-7755. Read Less
0points
2out of 4found this answer helpful.
Was this helpful?helpful2unhelpful2

Asked by
George_HD_CHI
Chicago
March 26, 2013
Answer: 
HI mzone 45,
You don't need to use white Teflon tape with the compression nut threads.That actually prevents the ring from sealing fully around the copper pipe.I'm confident this will take care of the problem you're having.
George
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
 
1 answer

Which is better...the 1/4 turn or the multi-turn? I'm having pressure issues on the "cold side"?

This question is from 1/2 in. Nominal Compression Inlet x 3/8 in. O.D. Compression Outlet Multi-Turn Angle Valve
Asked by
Read all my Q&A
August 1, 2016
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

Asked by
California
Read all my Q&A
Home Improvement Profile: Other
August 4, 2016
Answer: 
Hi Ken C, I prefer the 1/4 turn as you can turn the valve off quickly if you need to.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
1 answer

Are these made to seal air also?

This question is from 1/2 in. Nominal Compression Inlet x 3/8 in. O.D. Compression Outlet Multi-Turn Angle Valve
Asked by
Read all my Q&A
January 24, 2016
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

February 11, 2016
Answer: 
Hi Bradley - Our multi-turn stops are design, tested and certified for use in potable water distribution systems. They are not intended for use with air.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
1 answer

Had our house built 2 years ago. One of these shut off valves is starting to leak. The type used is a compression valve but the supply line is cpvc.

This question is from 1/2 in. Nominal Compression Inlet x 3/8 in. O.D. Compression Outlet Multi-Turn Angle Valve
Asked by
Richmond, VA
Read all my Q&A
February 13, 2015
Is this valve supposed to be used with a cpvc pipe?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

February 18, 2015
Answer: 
Kevin,
Thank you for your question. This BrassCraft 1/2 in. Nom Comp Inlet x 3/8 in. O.D. Comp Outlet Multi-Turn Angle Valve has a compression inlet that is not intended for installation on a CPVC pipe.
For CPVC pipe installation we have BrassCraft 1/2 in. Nom CPVC Inlet x 3/8 in. O.D. Comp Outlet Multi-Turn Angle Valve (Model # PR19X C, Internet # 202973970, Store SKU # 390118) that you can find at
Read More
Kevin,
Thank you for your question. This BrassCraft 1/2 in. Nom Comp Inlet x 3/8 in. O.D. Comp Outlet Multi-Turn Angle Valve has a compression inlet that is not intended for installation on a CPVC pipe.
For CPVC pipe installation we have BrassCraft 1/2 in. Nom CPVC Inlet x 3/8 in. O.D. Comp Outlet Multi-Turn Angle Valve (Model # PR19X C, Internet # 202973970, Store SKU # 390118) that you can find at your local Home Depot or on homedepot.com. Please follow the how-to video on the product page for installation instructions. You are also welcome to call our Product Experts toll free at 877-272-7755 if you have any further questions.
Read Less
+3points
3out of 3found this answer helpful.
Was this helpful?helpful3unhelpful0
2 »
  • 2016-10-30 T22:18:37.368-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_202047058, prod, sort_default
2 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 40ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 4.4 out of 5 by 16 reviewers.
Rated 5.0 out of 5.0 by Easy Install While remodeling my guest bathroom, I noticed the old valve beginning to leak (it's 33 years old). This was an easy replacement for the old. Just remember to have a clean straight edge to install. August 28, 2016
Rated 1.0 out of 5.0 by Poor Seal Like many HD products, this one is a low cost import. Fine. Imports are OK. BUT, the valve fails to seat properly after just a few uses v.v. won't shut off water flow fully when turned to 100% off. Given the time and hassle required to replace a valve, one would want it to last ... this product DOES NOT LAST. And, this view isn't just about one valve but based on experience with 3. These valves won't last. July 6, 2016
Rated 5.0 out of 5.0 by Great Great installer had no problem when it was installed. July 5, 2016
Rated 5.0 out of 5.0 by Perfect replacement while doing faucet I replaced a faucet on the bathroom vanity and needed a wrench to turn the water off! After realizing my original valves are 30 years old, I picked these up to replace at the same time. Super easy to put in a compression valve. Put the nut on first, then the copper sleeve. Push the valve all the way onto the system then hand tighten everything. Then, just a 1/2 turn with a wrench and you're done. Supposedly if you have an old copper fitting on there you can reuse it. I'm not a fan but people tell me it's acceptable. March 16, 2016
Rated 5.0 out of 5.0 by Thanks Home Depot I went to clean my toilet, and when I reached under the bathroom sink to get the cleaner, I noticed water, and upon inspection I thought it was going to be the pipes, but it turned out my shut off valve was dripping, I tried tightening, and loosening and leak just got worse. I took the old valve off, and it was through, Went to home depot, and purchased a new one that installed in minutes, no leaks. Thanks Home Depot for carrying these. November 7, 2013
Rated 5.0 out of 5.0 by Good quality, easy to install. Good quality valve. Easy to install to replace old valves that were dying. September 19, 2014
Rated 4.0 out of 5.0 by the valve works as expeded the compression conection is great for replacing solder conection the redemtion of the online gift card was a real pain the online help was finally able to work thru the problem with out her help I would have given up kudoes to your service depi. October 29, 2013
Rated 4.0 out of 5.0 by great product This product was very easy to install. It took no time to attach it to my existing pipes and had no leaks on the first try!! January 25, 2014
  • 2016-10-30 T20:21:18.469-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_16, tr_16
  • loc_en_US, sid_202047058, prod, sort_default
2 >>
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 34ms
  • REVIEWS, PRODUCT