Model # 4584838P

Internet #100187346

Char-Broil Universal-Fit Temperature Gauge
0047362848383

Discontinued Char-Broil

Universal-Fit Temperature Gauge

Frequently Bought Together

Product Overview

The Char-Broil Universal-Fit Temperature Gauge provides a replacement to older or worn-out temperature gauges so you can grill your food to optimal temperatures for safety and taste.

  • Lets you a ccurately gauge temperature of grill for safety and taste
  • Stylish chrome housing is long-lasting to keep you grilling
  • Fits 1/2 in. hole
  • Weather resistant for durability
  • Fits most gas grills

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

Is the back of the guage threaded so a 1/2" nut can be applied through a steel drum, as in a homemade smoker?

Asked by: Anonymous
I believe it is 3/8 inch since a 1/2 inch hole was drilled to accommodate the stem of the thermometer.
Answered by: BBQmom
Date published: 2015-09-17

How to zero

I've purchased this thermometer and its reading at the 100 degree Mark. How do it get the Gage to read zero??
Asked by: Anonymous
Mine has never read zero. It is usually about what the temperature is outside. Also, it may read higher if it your grill is in the sun
Answered by: BBQmom
Date published: 2015-09-17

can this be used in a kitchen range to test for accruacy of the oven's gauge?

Asked by: Hayes
This Universal-Fit Temperature Gauge can be used as long as the face of the temperature gauge is not in direct heat. Please follow this link for more information on this product... http://www.charbroil.com/temperature-gauge-universal-fit.html
Answered by: Charbroil
Date published: 2015-09-20

where is the proper placement of the temp gauge on the Brinkman grill

Asked by: Anonymous
WMH, This will be dependent on the specific grill you have. Generally the temperature gauge is located in the center of the front of the lid. If you are replacing the original temperature gauge that came with your grill this would be used in the same locatoin. There will be a small hole where you would insert the stem of the temperature gauge. The Univiersal-Fit Temperature Gauge is designed to fit a 1/2" hole. Again, you will want to check your specific grill to make sure it is compatible as It is possible that you may have a grill that was not designed to accept a temperature gauge and does not have the hole for instillation.
Answered by: Charbroil
Date published: 2015-09-20
  • y_2017, m_4, d_24, h_7CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_4
  • loc_, sid_100187346, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 24ms
  • QUESTIONS, PRODUCT

Customer Reviews

Universal-Fit Temperature Gauge is rated 3.7 out of 5 by 13.
Rated 5 out of 5 by from Good product. I bought two of these to go on my 2-burner Char-Broil gas grill. I placed one about 2/3 of the way up on the grill lid roughly centered over each burner. Since my grill did not come with thermometers I had to drill a 3/8" (not 1/2") hole for each. I used a standard drill bit but went slowly and didn't allow the bit to "walk." I've used these twp times and they've turned my cheapo grill into a grilling machine. I'm not sure exactly how accurate they are but they are consistent. I also use a Weber digital meat thermometer to monitor the internal temp of the meat while cooking. My cooking has improved greatly. I strongly recommend this product along with an internal thermometer.
Date published: 2011-08-21
Rated 5 out of 5 by from Easy installation My grill didn't come with a thermometer and this was easy to install. Just drill a hole, insert thermometer and tighten wing nut. Then you are ready to grill. I smoked a whole chicken which required 250* for 4 hours. The temperature stayed steady with no waivering at any time. Since then, have baked cornbread, potatoes and corn on the cob with excellent results.
Date published: 2013-05-07
Rated 3 out of 5 by from Fair!! it wasn't as universal as it say's it is so I had to make modifacations so it could fit my grill, I don't understand why there is not a temp gauge that is just for my model grill.
Date published: 2014-06-10
Rated 5 out of 5 by from Works as designed Installed in Weber Q. Drilled a small hole in the lid and put this gauge in. Took all of a minute and is the best improvement one can make to the Weber. Don't know why they don't do it anyway at Weber - it's less than $10 retail!!
Date published: 2011-11-17
Rated 5 out of 5 by from Temp gauge - exactly what we were looking for.. I bought this product for an existing gas gril we owned for yearsl (& it wasn't a Charbroil so you know you can buy this for any grill.) My husband is a great cook, loves to grill but hated not knowing how hot the grill was. Bought this last year, easy to install (drilled one small hole)..and its still working. He now knows approx. temp of the grill at all time & he's grilling all sorts of things even better than he did before. Thanks!
Date published: 2014-06-11
Rated 2 out of 5 by from The actual gauge look very different from the picture on the web The display on dial is every 100 degree instead of 50 degree. Dial does not have cooking temperature, warm,BBQ(in black band) Grill indicators on it. The diameter of the dial is only 1.75 inches. According the website product overview will fit 1/2 inch hole but the package indicates fit 3/8 inch hole. So the gauge is very different from the product describe on the website. I will return the guage.
Date published: 2013-09-04
Rated 1 out of 5 by from Not a good purchase I bought this a few months ago and it has filled with condensation and I cannot read the temperature on hot days.
Date published: 2014-06-25
Rated 4 out of 5 by from Belongs with that model BBQ That gauge appears well made, fits well and looks good.
Date published: 2014-07-06
  • y_2017, m_4, d_24, h_8
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_13
  • loc_, sid_100187346, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 22ms
  • REVIEWS, PRODUCT