Model # 138274

Internet #202516574

Store SKU #600037

Delta Greenwich Towel Ring in Satin Nickel
0885785382745

Delta

Greenwich Towel Ring in Satin Nickel

$18.98 /each
Color/Finish: Satin Nickel
  • Polished Brass
  • Polished Chrome
  • Satin Nickel

Frequently Bought Together

Product Overview

The Delta Greenwich Towel Ring in Satin Nickel is easy to install and is designed to coordinate with multiple faucet types (sold separately). The satin nickel finish combines style with classic beauty. Easy clip mounting eliminates the need for a set screw.

  • Satin nickel finish combines effortless style with classic beauty
  • Wall-mount design
  • Zinc construction
  • Holds up to 35 lb.
  • Easy clip mounting system makes installation simple
  • Instructions and template included for easy installation
  • View More from the Greenwich Collection

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Details

More Products With These Features

Search

Customer Questions & Answers

Delta Greenwich Towel Ring - Model # 138274 - Store SKU 600037 -- What is the diameter of the base that anchors to the wall?

Asked by: Anonymous
The bracket is 1 5/8 in at its widest point. see photo
Answered by: Holdbridge
Date published: 2015-09-20

Can I get a spare hanging bracket as I lost the original. I refer to the piece that is screwed into the wall and then is used to hang the actual rack

Asked by: Mikeo
I needed only the hanging bracket and could not find it I even went to the Delta site and all they had were the set screws . One of our Towel ring was very loose and the set screw was stripped. I couldn't get it off the wall with out pulling it off and creating a larger hole where the bracket was. so I bought 2 new Towel rings. The hole was easy to patch and the new brackets are very easy to install and didn't cost very mush. Well worth the price.
Answered by: Holdbridge
Date published: 2015-09-20

How to install directions for Greenwich Towel Ring

Current towel ring is loose, how can I tighten the wall mount and ring?
Asked by: 1313
See the Photo. Very easy
Answered by: Holdbridge
Date published: 2015-09-20
  • y_2017, m_2, d_26, h_18CST
  • bvseo_bulk, prod_bvqa, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_3
  • loc_, sid_202516574, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 86ms
  • QUESTIONS, PRODUCT

Customer Reviews

Greenwich Towel Ring in Satin Nickel is rated 4.5 out of 5 by 34.
Rated 5 out of 5 by from I never needed a towel ring before... I recently renovated a bathroom in an old house in Pennsylvania. I didn't have plans for a towel ring, but I realized that in that small bathroom, I wasn't going to install another towel bar by drilling into my new ceramic tile. I initially purchased an uber-inexpensive towel right from a major discount retailer starting with the letter of "W," but it was simply too cheap and flimsy for my liking. I found this towel ring at the Home Depot, and although slightly more expensive, it is incredibly sturdy. I installed it, and I am very pleased.
Date published: 2016-10-04
Rated 3 out of 5 by from Bad bracket design Cheap feeling chrome with terrible mounting brackets that don't mount the rack flush. Taking the rack off or on while adjusting fitment scratched the wall and you'll need to touch up. Mounting brackets have NO slider holes for adjusting, so if your drilled holes are off bit you're screwed.
Date published: 2016-10-04
Rated 5 out of 5 by from I hate the traditional mounting methods that use a set screw to clamp onto a bracket. When you ti... I hate the traditional mounting methods that use a set screw to clamp onto a bracket. When you tighten up the set screw it pushes the bracket off the wall eventually tearing out the anchors. This uses a different bracket that is the same as my towel racks and those have been holding great for about 2 years now. I have no doubt this bracket will hold without constant re-tightening. When installing make sure your anchors are flush with the wall. Otherwise it wont clamp against the wall and eventually pull the anchors out due to wiggling (see the scuff marks on my wall in my photo showing it's tight hold due to flush anchors). Generally anchors have a lip that prevents them from sitting fully flush with the wall, but if you tap it in a little more so the lip is recessed, these hold great.
Date published: 2017-02-08
Rated 5 out of 5 by from Exactly What We Needed We wanted a towel holder at the master bathroom entrance and don't have much horizontal space to work with. This was a perfect fit and easy to install. I'm thinking about adding a matching one above it since we have more vertical space to work with.
Date published: 2016-11-08
Rated 5 out of 5 by from divabarbie Purchased this towel ring to match my brass fixtures in my smaller bathroom. I was glad to have found them,since most styles are using brushed nickel or chrome. I searched and Home Depot had my polished brass rings. And priced very well.
Date published: 2016-11-08
Rated 5 out of 5 by from Good product and function. Easy to install. As some have mentioned, "doesn't mount tight to the w... Good product and function. Easy to install. As some have mentioned, "doesn't mount tight to the wall"... I suspect they didn't install quite correctly. The installation is relying upon a bit of "tension" between the wall and the clips. If you use the wall anchors, the lip around the anchor hole will sit against the wall and the mounting bracket will sit against the lip of the anchor. That small thickness of the anchor lip is/may be enough to prevent the ring from mounting securely. Solution... Instructions say to drill a 3/16" hole for the anchor. After that, I suggest you use a 1/2" drill bit and "counter sink" the hole just enough for the lip of the anchor to seat flush with the wall... and if the lip seats a bit below the surface of the wall, that's OK. The counter sink needs to be only something like 1/32"... just the thickness of the anchor lip. The mounting bracket will now sit flush on the wall and provide the needed tension for snug installation. This solution especially applies if the wall is textured. You wouldn't want to try to mount the bracket on a "high spot" in the texture.
Date published: 2017-01-29
Rated 4 out of 5 by from Wall mount is not tight The device is fine, but the wall mount is not tight in the wall. Do not like the new way to mount this towel bar.
Date published: 2017-01-03
Rated 4 out of 5 by from Installed on a hollow closet door. Had to use different fasteners that came with the Towel Ring. Installed on a hollow closet door. Had to use different fasteners that came with the Towel Ring.
Date published: 2016-11-13
  • y_2017, m_2, d_27, h_7
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_34
  • loc_, sid_202516574, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 65ms
  • REVIEWS, PRODUCT