ECHO Speed-Feed 400 Universal Trimmer Head-99944200907 - The Home Depot
Discontinued

ECHO

Model # 99944200907

Internet # 204159249

Store SKU # 205022

Speed-Feed 400 Universal Trimmer Head


ECHO Speed-Feed 400 Universal Trimmer Head
 

This item has been discontinued.
The Home Depot no longer carries this specific product.

$29.97 / each
Loading...

PRODUCT OVERVIEW

Model # 99944200907

Internet # 204159249

Store SKU # 205022

The revolutionary ECHO Speed-Feed 400 takes the hassle out of refilling your trimmer head, and is one of the easiest tap-to-advance heads available. Reloads in under 30 seconds in just 3 easy steps, all without disassembling the head. Comes with a 90 day consumer, 30 day commercial warranty.

  • Easy tap-to-advance to reload
  • Holds up to 20 feet of 0.095 diameter line
  • Accepts 0.080 in. - 0.095 in. diameter line
  • Reloads in less than 30 seconds with 3 easy steps

SPECIFICATIONS

Dimensions
Assembled Depth (in.)  3.25 in  Assembled Height (in.)  10 in 
Assembled Width (in.)  6.5 in  Recommended line diameter (in.)  .095 
Details
Fits brands  ECHO  Fits models  All ECHO Trimmers 
Hand Orentation  Universal/Reversible  Returnable  90-Day 
Trimmer Part Type  Bump Feed Trimmer Head  UV Protected  Yes 
Weatherable  Yes 
Warranty / Certifications
Manufacturer Warranty  90 day consumer, 30 day commercial 

CUSTOMER REVIEWS

Rated 4 out of 5 by 20 reviewers.
Rated 5 out of 5 by Greatest Thing Since Sliced Bread SRM Speed-Feed Universal 400 Trimmer Head is very easy to install and fitts on most trimmers. I have and Echo GT2400 and installed it in less then 10 minutes. The package comes with all bushings and studs for right or left hand threaded spindles. This particular model holds 20ft of 80 or 95 gauge line, If you can wind a clock you can install the line it is that easy. Take 20ft of line pass thru both holes on head until equal amounts are hanging on both sides of head then crank head until about 5" protrude thru holes, that's all there is to it. No taking head apart ond trying to install line so it won't bind. I would recommend this upgrade. October 23, 2013
Rated 2 out of 5 by Not so "universal".... I have a craftsman straight shaft trimmer without a bump feed head. I bought this because I got tired of changing line ever 5 minutes. It comes with many parts and seemed like it should fit, but the one nut in the kit I needed to use wasn't threaded all the way through... It had a counter bore instead of continuing the thread like all the other ones. No idea why, but basically that means the threaded shaft on your trimmer has to be like 2" long. Stupid design oversight, but there isn't much else available. I will be keeping it only because I have access to a machine shop and I'll just make the nut I need. It would be nice if I didn't have to spend $30 on an M10x1.0 left hand tap though. May 31, 2014
Rated 5 out of 5 by lot easier than they used to be. This is pretty easy and quick to wind new trim line on. I really like it. It last OK I wish the top could be made of something stronger, but it last a couple years of medium use before it is totally worn through from bumping it to feed the line. September 3, 2014
Rated 5 out of 5 by Very Good Quality This speed feed 400 head works great and with the arbors supplied can fit multiple trimmers. I use it on my stihl fs55. August 20, 2014
Rated 5 out of 5 Best Trimmer Head Ever purchased. This is the easiest trimmer head I have ever used. November 4, 2014
2 3 >>

SHIPPING AND DELIVERY OPTIONS

Standard Shipping includes delivery by small parcel service. Processing time varies by product.


If product is eligible for shipping to AK, HI and US Territories additional transit time and remote surcharges may apply.