Model # SBA025BC

Internet #205617271

Store SKU #1001093932

Everbilt 1/4 HP Submersible Sump Pump with Tether

Everbilt

1/4 HP Submersible Sump Pump with Tether

  • Motor comes with a thermal overload protection
  • Aluminum housing provides maximum durability
  • Replaces pedestals or submersible sump pumps
$8798 /each

Frequently Bought Together

Product Overview

The Everbilt 1/4 HP sump pump is built with reinforced aluminum housing for maximum durability. The pump is designed for easy installation, and can replace a pedestal or submersible sump pump. The tethered float switch will allow the pump to fit into basins 14 in. or larger. The heavy duty motor comes with a thermal overload protection. The pump comes with a 1 year limited warranty.

  • Easy installation and can replace pedestal or submersible sump sumps
  • Will fit into a 14 in. Dia basin or larger
  • Heavy duty motor supplied with thermal overload protection
  • Top suction discharge filters debris and minimizes clogging
  • For professional technical support call 1-844-241-5521

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

Can float be adjusted

Asked by: nita
I did, don't know if you are supposed to. I loosened up the screw on the umbilical cord, pushed the float closer. But you have to be careful not too close. The "bulb" will catch on the motor head on the way back down and not shut off. You have to make sure there is clearance. Shortening the cord will turn the pump on sooner. When you lengthen the chord, it will allow more water to come in before the pump turns on: aka, longer cycle times.
Answered by: hawkk
Date published: 2017-04-18

Can this unit be used in a 5 gallon Home Depot bucket? Will the float function properly?

Can this unit be used in a 5 gallon Home Depot bucket? Will the float function properly?
Asked by: JJ
Yes, I did. You cannot see it, but it's under there in the water. It wasn't a home depo bucket, it was a sheetrock mud bucket. The bucket I used is shorter which makes the top wider. Move the pump to one side and with moving the float to cycle faster, the bulb has plenty of room. I put rocks in the bottom to catch silt like in the instructions.
Answered by: hawkk
Date published: 2017-04-22

How to switch it on

Is there a switch?
Asked by: Menon
Plug it in. Automatically starts if submerged in water.
Answered by: TJ
Date published: 2017-04-23

Is this a dirty water pump?

Asked by: fla32703
Used it to pump very dirty water from months of rain water with leaves and algae inside. Had no issues.
Answered by: TJ
Date published: 2017-04-23
  • y_2017, m_5, d_25, h_12CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_22
  • loc_, sid_205617271, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 97ms
  • QUESTIONS, PRODUCT

Customer Reviews

1/4 HP Submersible Sump Pump with Tether is rated 4.1 out of 5 by 49.
Rated 5 out of 5 by from 1/4 hp submersible pump I bought this pump to replace my old pump I use to remove rain water from the top of our swimming pool winter cover. Our pool is 20' X 40' I ground. The pump we had took forever to pump the water off. This one is light weight enough sit upright on the cover and it pumps the heck out of some water. Sucks from the top so it doesn't try to suck your pool water through the cover.
Date published: 2016-12-27
Rated 1 out of 5 by from the tether switch never rose enough to activate the pump.... the tether switch never rose enough to activate the pump. replaced it within 2 weeks. waste of time and money. will never again get the tether switch kind.
Date published: 2017-01-18
Rated 5 out of 5 by from Used it to pump out an in-ground pool and it... Used it to pump out an in-ground pool and it worked well, and quickly.
Date published: 2017-04-18
Rated 2 out of 5 by from Was disappointed in this pump. Does it work? Yes it does but not the way you want it to. We set u... Was disappointed in this pump. Does it work? Yes it does but not the way you want it to. We set up our sump and bucket and we had just purchased it so we were doing some practice runs to see that it worked. The instructions specify how deep the bucket should be and how many inches of water it would take to raise the floater to activate the pump. The recommended amount was 14 to 18 inches or something like that. He had this pump submerged in over 16 inches of water and the floater was in fact floating but was not activating the pump. The problem was that the little floater attached to the rubber tube had to almost be vertical and that meant your sump would have to be a lot more than the indicated inches it said it would operate at. We tried adjusting the little tube length it has a screw for that, we made it shorter, we made it longer we submerged it in even more water and all it took was for someone to grab the little floater and pull it up and it would activate it. Not sure if this one is defective but we had build a contraption to operate it manually from inside the house while this was in the back yard so we could used a string to raise the floater up when the rain started pouring. Didn't do what it was advertised to do.
Date published: 2017-02-17
Rated 4 out of 5 by from Why do sump pumps fail when you are gone. Coming home to find water standing in the basement a q... Why do sump pumps fail when you are gone. Coming home to find water standing in the basement a quick trip to Home Depot and the purchase of this pump. The discharge attachment comes with an adapter to fit either 1 1/4 and 1 1/2" pipe. Disconnected the check valve, pulled the old pump. Connected the new pump, reconnected the check valve and watched the water go down. This replaced a 1/3HP pump but still has the head to empty the receiver up through the basement wall. I'm sure it will last till our next trip.
Date published: 2017-05-09
Rated 5 out of 5 by from This little pump works great! I used it to drain about 3-4 inches of water out of my pool and it ... This little pump works great! I used it to drain about 3-4 inches of water out of my pool and it did the job very fast! I used the optional plastic discharge tube that cost about $12 that is about 15 feet long. The instructions say it is not made for pools but I highly recommend it to anyone who wants to drain something very fast for a reasonable expense.
Date published: 2017-02-01
Rated 3 out of 5 by from I'm a little torn between two opinions. I think... I'm a little torn between two opinions. I think it does a great job pumping. No complaints there. What I don't like is it doesn't kick in until the float is vertical. In essence, it won't start pumping until you have about 18" of water. I was looking for a pump that would start at 1" of water.
Date published: 2017-05-09
Rated 5 out of 5 by from I know it says it's not for pools but we had hundreds of gallons of rain water in empty pool. Thi... I know it says it's not for pools but we had hundreds of gallons of rain water in empty pool. This sump pump worked like a dream. Used the two everbilt hoses which connected easily. Took about 10 minutes to setup. Highly recommend!
Date published: 2017-04-22
  • y_2017, m_5, d_24, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_49
  • loc_, sid_205617271, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 96ms
  • REVIEWS, PRODUCT