0011675710521

GE

Model 71052

Internet #202715282

Store SO SKU #1000033167

Low Voltage Module for Briggs & Stratton and GE Home Standby Generators

$72.49 /each

Frequently Bought Together

Product Overview

The Briggs & Stratton 71052 Low Voltage Module can be used in coordination with the Symphony II Transfer Switch to communicate via existing wiring on your backup generator to manage generator output and turn on and off thermostatically controlled appliances during a power outage. Use with any thermostatically controlled appliance like your air conditioner or heat pump. UL Listed. The Briggs & Stratton 71052 Low Voltage Module comes with a 3-year limited warranty that protects against defects in materials and workmanship. Keep it running - Keep it genuine. Help keep your outdoor power equipment running at peak performance and avoid costly repairs by ordering Briggs & Stratton replacement and maintenance parts. Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines. Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations. For more than a century, Briggs & Stratton branded engines and power equipment have helped consumers get the job done. Known for hard-working, dependable, efficient products, Briggs & Stratton is the world’s largest producer of gasoline engines for outdoor power equipment. Briggs & Stratton products are designed, manufactured, marketed and serviced in over 100 countries on all 7 continents.

  • Modules can be placed anywhere throughout the home for a customized installation
  • 1 or 2 modules should be sufficient for most homes
  • Weather resistant NEMA 4 rated enclosure and UL listed
  • Place where the thermostat control wire is accessible
  • Can use up to 8 modules with symphony II power management system
  • Click here for more information on Electronic Recycling Programs

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

3 Questions4 Answers

Customer Questions & Answers

Low Voltage Module for Briggs & Stratton and GE Home Standby Generators
Low Voltage Module for Briggs & Stratton and GE Home Standby Generators

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
 
2 answers

this box you showed me, not much help . Is there wire with it ? how do you mount the wire? is there a thermostat to turn it on and off?

This question is from Low Voltage Module for Briggs & Stratton and GE Home Standby Generators
Asked by
just me
August 15, 2011
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

Asked by
Houston, TX
Read all my Q&A
November 8, 2011
Answer: 
Best to download the manuals from the Home Depot or GE website to see and better understand how these are installed. The need either a low or high voltage feed (depending on which switch you need) to monitor the appliance (say A/C, Electric ovens, Pool, Spa, etc.) and they also need a 120 ac current hookup as well to power the unit.
There is no wire with it just a sealed control board. You have to mount Read More
Best to download the manuals from the Home Depot or GE website to see and better understand how these are installed. The need either a low or high voltage feed (depending on which switch you need) to monitor the appliance (say A/C, Electric ovens, Pool, Spa, etc.) and they also need a 120 ac current hookup as well to power the unit.
There is no wire with it just a sealed control board. You have to mount the unit to your local city electrical codes which might require conduit depending on the load and location (inside or out).
There is no thermostat. It is monitor of the power draw from the Genny and it tells the Genny computer which order you set as a priority to run the appliances you hook these up to. Up to eight priorities can be set. Read Less
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
SteelToes
Chicago IL
August 16, 2011
Answer: 
Hi there and thank you for your question.
This unit doesn't come with the wire, wire is to be provided by the certified installer.Wiring diagrams and instructions can be viewed bellow (see relevant images) and also obtained from this site;
http://bsintek.basco.com/BriggsDocumentDisplay/default.aspx?filename=gfhqxHXDnfBhU7y
Hope this helps.
George How-To-Community
User submitted photo
+1point
2out of 3found this answer helpful.
Was this helpful?helpful2unhelpful1
 
1 answer

Does this unit require a low volt line run to the auto transfer switch to work? If so, #18 guage? How many pairs?

This question is from Low Voltage Module for Briggs & Stratton and GE Home Standby Generators
Asked by
Hershey, pa
Read all my Q&A
July 7, 2015
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

July 9, 2015
Answer: 
Please refer to the unit's installation manual for further assistance.
-3points
0out of 3found this answer helpful.
Was this helpful?helpful0unhelpful3
 
1 answer

do they still make a low voltage ice melt system for roofs and guters

This question is from Low Voltage Module for Briggs & Stratton and GE Home Standby Generators
Asked by
justme
August 14, 2011
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

Asked by
Tangelo
Chicago
August 18, 2011
Answer: 
Hello This is Tangelo from the How-To Community! Home Depot does carry the low voltage roof de-icing cable either on the website (see link below) or at the store, and they come in various lengths. I hope this helps, if you have any more questions you can find me on our website at Read More
Hello This is Tangelo from the How-To Community! Home Depot does carry the low voltage roof de-icing cable either on the website (see link below) or at the store, and they come in various lengths. I hope this helps, if you have any more questions you can find me on our website at community.homedepot.com
http://www.homedepot.com/h_d1/N-5yc1v/R-100187093/h_d2/ProductDisplay?langId=-1&storeId=10051&catalogId=10053 Read Less
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
1 of 1
  • 2016-09-18 T12:08:32.118-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_202715282, prod, sort_default
1 of 1
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 59ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 4.0 out of 5 by 1 reviewer.
Rated 4.0 out of 5.0 by Great approach to managing what you want to run vs. have to run Liked how this whole new approached is worked out. I didn't know enough to go with one, dual, low voltage unit for my 2 A/C units. I went with 2 separate ones thinking they needed to be in 2 different areas but they didn't. But very good setup to manage the system assuming it works. We will see the 1st time the power goes off. November 8, 2011
  • 2016-09-18 T12:29:45.968-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_1, tr_1
  • loc_en_US, sid_202715282, prod, sort_default
1-1 of 1
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 56ms
  • REVIEWS, PRODUCT