Rated 4.1 out of 5 by 85
Rated 4.0 out of 5.0 by ktex Gets the Job done
The light weight is of the impact very nice. The air requirement does require an air hose that is shorter than 25' for maximum torque though.
August 30, 2016
Rated 4.0 out of 5.0 by TimK Outstanding Entry Level Impact
I bought this thing to make tire rotations quicker and easier. This thing makes easy work of lug nuts. Definitely happy with my purchase.
August 30, 2016
Rated 5.0 out of 5.0 by Maldo19d Great Impact Wrench for the price!
This impact is a great purchase. I work as an Automotive Technician and use it everyday without and issues. Has more power than some of the guys that have a craftsman impact and is pretty comparable to the snap on in weight and power. If you want a great tool and don't want to spend a ton of money get this and be you won't be disappointed.
July 26, 2016
Rated 1.0 out of 5.0 by Crow5716 Could not remove bolts!
I bought this because it had better stats than my current Craftsman one. I specifically bought this to remove some bolts for a brake job. It would not budge them. This thing is garbage. I don't think it's rating is right.
I am using a 25 gallon compressor which should be more than enough.
I bought this yesterday, used it today and am talking it back today. I just purchased an AirCat impact online that actually states the breakaway/reverse torque is 1295 pounds. Hopefully this new one will do the job that this Husky could not.
I would not recommend this for anyone doing serious work on a vehicle. It might be fine for changing tires.
I am including a picture of the bolts it would not remove.
December 16, 2015
Rated 5.0 out of 5.0 by Dave Great Tool
Great tool, works well for the price! im using a 20 gallon huski compressor with 4 scfm@ 90 psi and it overcame ever challenge so far. Don't use it everyday though so not sure for longevity.
August 5, 2016
Rated 5.0 out of 5.0 by Chevy513 Monster of a gun, punishes any bolt with ease!
This gun is amazing! First off it is simply a monster 800ft lbs easy! I love the composite house it makes it light weight, the forward backward switch is nice and the power setting control knob is high quality, the ring holder that holds sockets on is great it's not to tight or to loose. Prior to this gun I had an IR titanium running 780ft lbs, with a claimed 1200ft lbs of nut busting torque, unfortunately my IR was stolen and I had worked in the truck industry for 15 years now not doing that for a living anymore I couldn't justify spending over $300 on a new IR so I got this Husky 1/2" 800ft lbs Impact Gun, well so far it has done everything my IR ever did and at a third the price, I'm am very impressed with this gun and I highly recommend it! Before I purchased this gun my friend had loaned me a craftsman gun and it would not remove lug nuts and I know I'm running enough power with a 60 gallon compressor running 155psi with 11.5scfm at 90psi, so I went and bought this gun I had my eye on it for months. before I used it I was re configuring my air filter, ball valve shut off and regulator setup, as I went to tighten my regulator it exploded into about a dozen pieces and reading up I realized it was way to small for my setup. wanting to try my new Husky gun I just ran without a regulator to give it a shot. first I flooded it with oil like the manual says to do and then ran it in both directions for about 30 seconds. Then down to business I put it on my truck lug nut that i had tightened with a 24" breaker bar and all my weight on it, I put the gun in reverse and bam it took that lug nut off faster than I could blink an eye! I proceeded to take of the other 5 lug nuts and zip zip zip I felt like I was in a NASCAR pit crew! I ran all 6 of those bolts off in less than 20 seconds! and the compressor used hardly any air and never kicked on it only use about 5 pound of air. I should mention that I was running 50 feet of 3/8" air hose and I was using those new husky high flow aluminum fittings Model # 036-0138H, and believe me those suckers push some CFM and psi! Let me put this straight right now, ANYONE WHO SAYS THIS GUN HAS NO POWER IS NOT RUNNING ENOUGH PSI OR CFM TO IT! You had better get yourself in line and not try to run some little 8 gallon compressor and then try and say that this gun has no power and is junk, the fact is that if you can't run this gun then your compressor is junk or your air is getting bottlenecked somewhere. So if you can't run this gun then take it back and realize your compressor isn't made to run serious air tools or buck up and buy a real compressor if your want to run a real 1/2" gun and you want to run other serious air tools and if you do that then you'll see the real capabilities of this gun and realize that it's a beast!!!
March 17, 2016
Rated 5.0 out of 5.0 by Luckydog1955 Excellent value
I'm an experienced auto DIYER. This wrench is a nice step up. Great power with a modest cfm requirement, low noise, light weight, I love it,
August 2, 2016
Rated 5.0 out of 5.0 by Andy Impact
I purchased this week ago i Work in a shop that uses Cornwell tools and i did not want to pay their price i change tires and brakes everyday and this gun works as good as the better ones on the truck and feels better and has a better reverse button it is light and has lots of power this is the most powerfull gun for the price i found i would buy it again it's a good tool as good as the tool truck sells at 1/3 the price
July 16, 2016