Free Shipping and BOPIS


Model # THDJW136501026

Internet # 202036884

Store SKU # 198225

30 in. x 80 in. Textured 6-Panel Primed Composite Molded Bored Interior Door Slab

This item has been discontinued.
The Home Depot no longer carries this specific product.
Please select another option below.

$37.00 /each


Model # THDJW136501026

Internet # 202036884

Store SKU # 198225

The Jeld-Wen 30 in. x 80 in. Wood White 6-Panel Slab Door offers a traditional 6-panel design in primed, ready-to-finish molded wood. The 1-3/8 in. thick construction is an economical and environmentally friendly choice made from wood by-products. It has a pre-bored lock-set opening for time-savings and convenience. The door is reversible and can be mounted to either the left- or the right side of the opening.

California residents: see  Proposition 65 information

  • Pre-bored and ready for handleset for your convenience
  • Matching Bi-folds also available
  • Textured woodgrain surface is primed and ready to paint
  • Doors must be finished on all 6 sides
  • Trimmable allowance of 1/2 in. from door height and width (1/4 in. from each side)
  • Reversible handing allows flexibility when installing

  • Design your custom door online
  • Note: Product may vary by store

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.


Door Size (WxH) in. 
30 x 80 
Door Thickness (in.) 
1.375 in 
Color Family 
Primed White 
Core Type 
Door Handing 
Door Material 
Door Type 
Interior Slab 
Lockset Bore 
Finish Type 
No additional items or accessories included 
Panel Type 
6 Panel 
Product Weight (lb.) 
24 lb 
Warranty / Certifications
Manufacturer Warranty 
5-Year Limited Warranty 


Rated 3.8 out of 5 by 17 reviewers.
Rated 1.0 out of 5.0 Fell Apart After 2 Weeks POOR DESIGN = POOR QUALITY = POOR PERFORMANCE! Bought this door 2 weeks to replace a 20 yr old door that fell apart, due to inadequate glue as have several other doors in our house - all identical in construction, design and appearance to this door. The door I bought hasn't been installed yet, in part because it is 1/4" wider and 1/2" longer than the door it would have replaced. In the mean time, while I arranged for someone to do all the work of cutting the door down, I looked at it yesterday, and it's coming unglued! It's been standing upright for 2 weeks inside our air conditioned house in the room the door will "live" in, and the "skin" has come unglued at the inside edge near the top of the door, with the "skin" bowing out maybe 1/4" from the particle board frame. I've attached a picture of the top half of the door. You can't miss the problem! I am STUNNED and frustrated! This door is junk, and I have zero faith that a replacement will fare any better. I have tried before to fix doors like this one, using wood glue and clamping and it doesn't work. The door looks good in the store and is cheap, but I will not buy this again if I can find something of better quality. How is it even possible for an unused door to fall apart?? Wow. April 24, 2013
Rated 5.0 out of 5.0 by Excellent value replacement doors I purchased 6 of these doors in various widths to replace the flat doors in a 20 year old home. These doors were exactly what I needed. I purchased the doors with the door knob hole pre-drilled and they matched the old doors and jambs perfectly. Needed 2 coats of paint before installation. I removed old doors individually and used as a template for routing the hinges. I purchased a Milescraft hinge template which worked perfectly with my router. i also bought shiny new hinges to replace the painted-over old ones. Now the doors look clean and sharp and it a few years off the house! December 10, 2012
Rated 4.0 out of 5.0 by Door was fine - label was awful The door is a very good substitute for a wood paneled door. Appearance is very good as is ease of installation. I would strongly encourage Home Depot and / or JenWeld review the labels on the product. It had a paper label and I spent far too much time removing the torn paper and adhesive from the door. It should have a vinyl type label to avoid the nuisance and time associated with cleaning adhesive off of the product May 2, 2014
Rated 5.0 out of 5.0 by 5 stars This door are excellent for the price I paid they look great April 28, 2015
Rated 5.0 out of 5.0 by Bathroom Door Install was easy and it looks great. Hollow core doors are not designed to be trimmed more than 1/2 in from the top or more than 1 in from the bottom. If you properly trim the door and SEAL it, the door will not split and warp. Most people skip that step, install them and complain that the door is now warping or coming apart. December 20, 2013
Rated 4.0 out of 5.0 by Exactly matched existing doors What can I say, they are cheap doors yet they matched the doors being replaced exactly. They machined well with the proper router templates and installation was a breeze. March 18, 2014
Rated 3.0 out of 5.0 by Beware: Installation can be a nightmare!!! I replaced 4 doors (30" and 28") in my house this week with these doors, and it turned out to be a nightmare. First, the widths are misleading. The 30" doors are 30 and 1/16", and the 28" is 28 and 1/8". That alone had me having to use a circular saw to make up for the difference. Secondly, there is only boring for the door knobs and not the hinges. If you do not have a router with a hinge kit or aren't experienced in using a chisel, good luck. I bought the Ryobi kit and used it with a router. Lastly, removing the sticker is a nightmare. Quick trick . . . use a hair dryer. Again, the doors are good but without knowing the real widths or having all the right equipment, installation can and will be, a nightmare. April 21, 2012
Rated 5.0 out of 5.0 by Excellent buy for the price I bought three of these doors for the bedrooms of a second house we own, to replace doors that had suffered a lot of wear and tear from children and animals. These are very basic doors, but totally adequate for this use. They are hollow core so you do have to be careful not to trim too much off the sides or top or bottom. A quarter inch appears safe. If you need to take more off, there is a procedure in the DIY books for removing the solid border piece, cutting the shell and replacing the solid piece. Didn't need to do that. Mortising the hinges was easy, using a hinge mortise template and a basic router. I got the doors positioned to line up almost perfectly with the existing latches, using the precut holes for the door handles. The main thing to remember is the old carpenter's maxim, measure twice, cut once. The doors are holding up well to kids and animals so far. August 28, 2013
  • 2015-08-30T11:17:13.092-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_17, tr_17
  • loc_en_US, sid_202036884, prod, sort_default
2 >>