0027557983129

Lutron

Model MS-OPS2H-LA

Internet #203202140

Store SKU #490643

Maestro 2 Amp Single Pole Occupancy Sensing Switch - Light Almond

Frequently Bought Together

Product Overview

Let Lutron's Maestro Occupancy Sensor switch turn the lights on and off for you. It's a simple, easy, and low cost way to save energy and add light automation to your home. Install a Maestro Sensor and lights turn on when you enter the room, and then turn off automatically after you leave. This sensor features XCT Sensing Technology which detects fines motion, such as typing at a desk or reading, ensuring lights do not turn off inadvertently. Equipped with ambient light detection, you can customize your sensor to detect daylight so lights don't turn on with enough natural light in your room. Keeping the sleek design of the Maestro family, Lutron sensors will match the decor of any room in your home. Install it in the laundry room for added convenience when your hands are full, or in the kids' rooms and never worry about lights being left on by mistake. Maestro Sensors work with any bulb type, including CFLs and LEDs. This switch can also be easily programmed to function as a vacancy (manual-on) sensor. Coodinating Claro Wallplates and Accessories sold seperately.

  • Automatically turn lights on and off based on room occupancy
  • Uses Advanced XCT sensing technology, offering the most reliable on/off performance up to 30 ft.
  • Works with all bulb types
  • Senses daylight, so lights don’t turn on inadvertently (optional)
  • Can be switched to vacancy mode (manual-on, auto off)
  • Great for small rooms like laundry rooms, closets, and bathrooms
  • Simple, easy, and low cost way to bring light automation to your home
  • Sleek design of Maestro controls
  • Programmable time-out of lights - 1, 5, 15, or 30 minutes
  • Up to 250 W incandescent, halogen, electronic low voltage; 200-Watt magnetic low voltage; 150 W CFL/LED; 2 Amp ballasts
  • Single-pole only
  • No neutral wire required
  • Coordinating Claro wall plates and accessories sold separately



  • Click here for more information on Electronic Recycling Programs

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

48 Questions185 Answers

Customer Questions & Answers

Maestro 2 Amp Single Pole Occupancy Sensing Switch - Light Almond
Maestro 2 Amp Single Pole Occupancy Sensing Switch - Light Almond

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
 
2 answers

how do you change the time the light is on?

This question is from Maestro 2 Amp Single-Pole Occupancy Sensing Switch - White
Asked by
Lake Jackson TX
Read all my Q&A
August 1, 2016
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

August 3, 2016
Answer: 
You will need to press and hold the button to set the time the light is on.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Read all my Q&A
August 2, 2016
Answer: 
TO change the timeout function you need to press and hold the large on/off button until the sensor blinks the correct number of times. 2 blinks is a minute, 3 blinks is 5 minutes, 4 blinks is 15 minutes and 5 blinks is 30 minutes.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
2 answers

I bought Lutron motion detector switch

This question is from Maestro 2 Amp Single Pole Occupancy Sensing Switch - Light Almond
Asked by
cincinnati ohio
Read all my Q&A
June 17, 2016
My wall socket has Perl Red ,Black and a bare wire teminal. The switch I bought has 2 black one green and one bare wire on the outside. How do I connect which one to which one Thank you
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

Asked by
Nampa, ID
Read all my Q&A
Home Improvement Profile: DIYer
June 28, 2016
Answer: 
I assume the Perl red wire is a ground wire (usually white) or it may be a switch-to-switch wire for a dual switch setup (like a stair light where there is a switch at the top and bottom of the stairs). This switch can be wired for this application according to the instruction sheet. It doesn't matter which black wire is hooked to line power and which is hooked to the load (light, fan, etc.) Bare wires Read More
I assume the Perl red wire is a ground wire (usually white) or it may be a switch-to-switch wire for a dual switch setup (like a stair light where there is a switch at the top and bottom of the stairs). This switch can be wired for this application according to the instruction sheet. It doesn't matter which black wire is hooked to line power and which is hooked to the load (light, fan, etc.) Bare wires are always ground and are hooked together in common. Green usually is also ground. I always try to determine which wire is 'hot' 9use 125 AC volt range) and if ground wires are common (use ohm-meter) on inexpensive multimeter (you can purchase from HD--every DIY'er needs one of these). Also, you might look on U-tube to see if someone has made a video. I use them all the time. BE SURE YOU DO NOT EVER HOOK A HOT (BLACK) WIRE TO A WHITE OR BARE WIRE! You could start a fire or get a bad burn and will probably damage your house wiring. Good luck. Read Less
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Sacramento, CA
Read all my Q&A
Home Improvement Profile: DIYer
June 18, 2016
Answer: 
Assuming the outlet is wired comventionally -
Black is hot from the breaker box to the switch.
Red is the switched hot from the switch to the light.
Green & Bare are both grounds.
White is Neutral, but your house is older (pre 1960's?). Luckily for you this switch design doesn't need it.
Be sure to have the breaker turned off (fuse pulled) the whole time when working with any wiring.
The 2 black
Read More
Assuming the outlet is wired comventionally -
Black is hot from the breaker box to the switch.
Red is the switched hot from the switch to the light.
Green & Bare are both grounds.
White is Neutral, but your house is older (pre 1960's?). Luckily for you this switch design doesn't need it.
Be sure to have the breaker turned off (fuse pulled) the whole time when working with any wiring.
The 2 black wires from the switch are inter changable. One to back kn the switch box and the other to the red.
I don't recall this switch having both bare & green wires - check your instruction sheet that came with your switch.
Read Less
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
2 answers

DOES NOT WORK PROPERLY

This question is from Maestro 2 Amp Single-Pole Occupancy Sensing Switch - White
Asked by
BURLINGTON CONNECTICUY
Read all my Q&A
July 24, 2016
IT WILL NOT STAY PROGRAMMED. WORKS FOR A WILE THEN THE LIGHT STAYS ON
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

Asked by
Racine, WI
Read all my Q&A
Home Improvement Profile: Professional
July 26, 2016
Answer: 
the usual cause for such a behavior is the switch not being grounded. It needs an actual ground. you can put a wire from the frame of the switch to another known ground somewhere nearby (like an outlet) to confirm.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Read all my Q&A
July 25, 2016
Answer: 
In order to properly diagnose and resolve this issue, Lutron would recommend that you reach out to their 24/7 tech support hotline at 1-844-588-7661 where an agent would be happy to assist you.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
3 answers

Will the light off in the morning when there is sunshine? Why is it said optional? thank you

This question is from Maestro 2 Amp Single-Pole Occupancy Sensing Switch - White
Asked by
Read all my Q&A
July 15, 2016
Senses daylight, so lights don’t turn on inadvertently (optional)
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (3)

Asked by
CA
Read all my Q&A
Home Improvement Profile: DIYer
July 19, 2016
Answer: 
This switch is an occupancy switch and works on occupancy only. You can set the amount of time the light stays on when it senses movement. Every time it senses movement that time will reset.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

July 16, 2016
Answer: 
No, this is a motion detector switch.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Rosenberg, Texas.
Read all my Q&A
Home Improvement Profile: DIYer
July 16, 2016
Answer: 
This is a programable switch.
You can setup the switch not to turn on when there is ambient light. All programs are optional
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
2 3 4 »
  • 2016-08-29 T16:01:39.476-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_203202140, prod, sort_default
2 3 4 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 39ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 4.3 out of 5 by 176 reviewers.
Rated 4.0 out of 5.0 by First one didn't work but replacment did I put this switch in my guest bath and was totally happy with its performance turning the exhaust fan off and on for my deaf wife. I decided to put one in my main bath too. Thr first one wouldn't stop cycling off and on, no matter what adjustments I made so I took it back and Home Depot replaced it, no questions asked except to describe the problem. The new one works beautifully! Does take a little time and patience to program, though. Thanks, Home Depot employees for your service. June 28, 2016
Rated 5.0 out of 5.0 by Occupancy Senssing switch it was a very easy installation to the new switch. Works great June 8, 2016
Rated 4.0 out of 5.0 by Good, but range is limited The switch works well and responds quickly. The problem is, that the range seems to work horizontally ONLY. I placed it at the top of a basement stairway. When trying to come UP the stairs, it won't read my presence until I am inline with the sensor -- HORIZONTALLY. It doesn't recognize vertical movement August 16, 2016
Rated 5.0 out of 5.0 by Great product! This sensor works very fast! Installed it in high traffic laundyr/mudroom with one door 20' away & it works perfectly. Easy to wire up also. August 17, 2016
Rated 5.0 out of 5.0 by Great product! I just moved into a new place. I hate where the kitchen light switch is located so I bought one of these so the kitchen lights would go on automatically when I walk in and I don't have to mess with the switch. It works exactly as I had hoped and I'm very glad I bought and installed it. An added benefit I found is that I can leave the kitchen with a plate of food in one hand and a glass of milk in the other hand and not have to bother with turning the light off since it goes off automatically. I may buy another one for the garage. July 10, 2016
Rated 5.0 out of 5.0 by It just works ... I've actually used these for the past 5 years. Easy to install, configure, and operate. Perfect for the Powder Room, Laundry Room and kids bathroom (helps limit those extended showers to 15 minutes). This was actually the first accessory I purchased for our new home. July 19, 2016
Rated 5.0 out of 5.0 by Works as designed. Using in a pantry, automatically comes on when door is opened. April 27, 2016
Rated 5.0 out of 5.0 by Motion detection switch works! I installed the switch in the small dark room next to garage door and it always turned on when we entered house from garage. Super convenient! April 5, 2016
  • 2016-08-29 T17:21:49.945-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_176, tr_176
  • loc_en_US, sid_203202140, prod, sort_default
2 3 4 5  ... 7 >>
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 33ms
  • REVIEWS, PRODUCT