Rated 3.9 out of 5 by 7
Rated 4.0 out of 5.0 by LylaD A very useful tool.
I got this tool because it offered a chance to get a second router base that would work with it, for a very reasonable price ( which I did get along with a guide set ). It is light weight, strong and seems that it will give me no problems using it. The guide set also allows for the use of a Porter-Cable brass guide set as well. I am looking forward to a lot of projects using this tool.
August 2, 2016
Rated 4.0 out of 5.0 by Vic Router circle cutter
Very easy to set up and use. Works great. I would recommend this product.
January 12, 2016
Rated 5.0 out of 5.0 by Carvemaster Milescraft router guide kit
This item is addition to my other Milescraft tools used with my Routers.
February 3, 2015
Rated 4.0 out of 5.0 by John Works well, a bit of a learning curve
The instructions had to be gone over more than once and the pieces tried to come apart a couple of times. The center piece of the circle cutting jig needs to be a little more substantial to hold it in place better, but those are my only two real complaints. I needed two plywood circles of 24.5" diameter and I got those exactly. Product works well...just could use a little better stability and better instructions.
August 13, 2013
Rated 4.0 out of 5.0 by Buff see below
product worked well, I would suggest the centering cone be made out of more durable material (the mounting hole tended to alonggate) and centering pin be made out something other than a aluminum nail (it would bend)
March 25, 2014
Rated 5.0 out of 5.0 by BIGAL GOOD DESIGN,SMALL PROBLEM W/ KNOBS ALK
GREAT SERVICE,VERY GOOD PACKING
EASY TO USE, VIDEO GOOD HELP
SMALL PROBLEM. THE LOCKING KNOBS THAT HOLD
THE ROUTER TO THE BAR ARE JUNK ...
.THE KNOBS ARE
PLASTIC . THREADED INTO A METAL BOLT THATS STRIPS OUT EASY. UPGRADE TO A KNOB THAT HAS A METAL INSERT IN IT OR A NUT AND WASHER.
BE CAREFUL NOT TO OVER TIGHTEN OR YOU WILL
BREAK THE BASE PLATE. GOOD PRODUCT.
I WUOLD BUY THIS AGAIN !!THANKS -- ALK
December 11, 2012
Rated 1.0 out of 5.0 by Gerg Many features
I did not use the guide because it had play between the subbase and the plastic part that connects to the straight edge the guide mounts to. I have a Porter Cable router and I bought the Porter Cable edge guide that cuts circles elsewhere. I also bought an offset subbase that is one piece from Pat Warner directly.
June 6, 2011