0026715195428
Discontinued

NuTone

Model QTN80L

Internet #202491884

Store SO SKU #1000536252

QT Series Very Quiet 80 CFM Ceiling Exhaust Bath Fan with Light and Night Light

This item has been discontinued.
The Home Depot no longer carries this specific product.

Frequently Bought Together

Product Overview

The NuTone QT Series Very Quiet 80 CFM Ceiling Exhaust Bath Fan with Light and Night light features an 80 CFM fan to help reduce moisture. The motor operates at 0.8 sones for efficiency and can be used in rooms up to 70 sq. ft. for ideal operation. The fan uses a 100-Watt bulb to provide light and a 4-Watt bulb to act as a night light.

  • 80 CFM fan helps reduce moisture
  • Motor operates at 0.8 sones for efficiency
  • For use in rooms up to 70 sq. ft. for ideal operation
  • Uses 1 incandescent 100-Watt bulb for bright illumination
  • Employs a 4-Watt bulb as a night light
  • Made from galvanized steel for strength
  • UL listed for safety
  • Can be mounted over bathtubs or showers when connected to a GFCI protected branch circuit
  • Can be mounted on an I joist with the unique spacer
  • 4 in. duct

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

8 Questions16 Answers

Customer Questions & Answers

QT Series Very Quiet 80 CFM Ceiling Exhaust Bath Fan with Light and Night Light
QT Series Very Quiet 80 CFM Ceiling Exhaust Bath Fan with Light and Night Light

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
 
4 answers

does this fan have a backdraft damper to stop cold air from entering the bathroom?

This question is from QT Series Very Quiet 80 CFM Ceiling Exhaust Bath Fan with Light and Night Light
Asked by
Dave
June 4, 2012
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (4)

Asked by
Green Valley, AZ
Read all my Q&A
Home Improvement Profile: DIYer
January 27, 2014
Answer: 
Yes, it does have a damper and it is designed to not click in windy conditions.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Read all my Q&A
October 21, 2013
Answer: 
There is a damper in the vent outlet opening, but it does not fit very tightly, so some cold air may get past it. I haven't had mine long enough yet to know for sure.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Chicago
Read all my Q&A
November 4, 2012
Answer: 
Yes, if installed correctly, there is a dmaper that will close if air attempts to flow into the unit from the exhaust port
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

June 5, 2012
Answer: 
Yes, the damper is in th 4" duct connector.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
 
4 answers

Will a single on/off switch work this unit? Or will it require rewiring to allow the light, nitelight and fan to be run independent of each other?

This question is from QT Series Very Quiet 80 CFM Ceiling Exhaust Bath Fan with Light and Night Light
Asked by
Mary
Cleveland, Ohio
January 27, 2012
I'd like to replace a 20 yr. old simple fan with this unit as I require more light in the room. Current unit used a simple on/off switch.
+1point
1out of 1found this question helpful.
Was this helpful?helpful1unhelpful0

Answers (4)

Asked by
navarre florida
Read all my Q&A
Home Improvement Profile: Professional
June 24, 2014
Answer: 
you have to have a special switch from Nutone in order to use a single switch and 5 wires to make it work(white neutral, black hot, blue hot for fan, red hot for light and a ground). You have to have two switches without the special switch. Most house wiring only has three wires for a single switch and 4 wires for two switches on a single circuit. So 99% of the time a rewire will be required to get this Read More
you have to have a special switch from Nutone in order to use a single switch and 5 wires to make it work(white neutral, black hot, blue hot for fan, red hot for light and a ground). You have to have two switches without the special switch. Most house wiring only has three wires for a single switch and 4 wires for two switches on a single circuit. So 99% of the time a rewire will be required to get this fan to work. Read Less
+2points
2out of 2found this answer helpful.
Was this helpful?helpful2unhelpful0

Asked by
Green Valley, AZ
Read all my Q&A
Home Improvement Profile: DIYer
January 27, 2014
Answer: 
If you have existing wiring where you have only one switch, you can wire such the fan and light runs at the same time. If you wish independent operation, you will have to rewire. I could not rewire, so I could not use the night light feature.
+3points
3out of 3found this answer helpful.
Was this helpful?helpful3unhelpful0

Asked by
Chicago
Read all my Q&A
November 4, 2012
Answer: 
There are separate wiring leads for each function: Fan, Main Light and Night Lite. You can do what you asked, but it doesn't make sense to do it. If you are looking for having them all controlled from a single switch then you will be wasting money on a night light function. There are other models that you can get with only a main light and fan, no night light. They will probably less expensive if the Read More
There are separate wiring leads for each function: Fan, Main Light and Night Lite. You can do what you asked, but it doesn't make sense to do it. If you are looking for having them all controlled from a single switch then you will be wasting money on a night light function. There are other models that you can get with only a main light and fan, no night light. They will probably less expensive if the noise and CFM ratings are similar Read Less
+3points
3out of 3found this answer helpful.
Was this helpful?helpful3unhelpful0

January 30, 2012
Answer: 
Hi, Mary. Thanks for your questions about this unit. The short answer is yes, you will have to run extra wires. It would be my recommendation that you get a 3-function switch (model 66W), which will fit into a single-gang box, and then contact our Technical Support group if you have further questions about this installation. Please dial 888-336-6151. Thanks.
+2points
2out of 2found this answer helpful.
Was this helpful?helpful2unhelpful0
 
3 answers

How big does the opening have to be to install?

This question is from QT Series Very Quiet 80 CFM Ceiling Exhaust Bath Fan with Light and Night Light
Asked by
Lester
Grand Rapids,MI
November 23, 2011
My opening is 9 by 15 will it fit?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (3)

Asked by
Green Valley, AZ
Read all my Q&A
Home Improvement Profile: DIYer
January 27, 2014
Answer: 
The box picture has incorrect diimensions. From the mountin plate to opposite side needs 11 3/8 (Box calls for 10½". Fore and aft takes about 10 ¾"
Measure the actuall housing...don't use the dimensional installation pictrue provided...it is incorrect.
+2points
2out of 2found this answer helpful.
Was this helpful?helpful2unhelpful0

Asked by
Chicago
Read all my Q&A
November 4, 2012
Answer: 
Check the install manual for the opening measurements. There is a link in the More Info section ofthe product description.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

November 24, 2011
Answer: 
Hello, Lester. Thank you for your question. The housing dimensions for the QTN80L are as follows: 10-1/2" x 11-3/8" x 7-5/8" in depth. It would appear that you need to increase one side and possibly patch the other. The grille cover is 13" x 14". IF you have further questions and would like to speak with a Technical Support person, dial 888-336-6151. They are available Mon-Fri EST.
+3points
3out of 3found this answer helpful.
Was this helpful?helpful3unhelpful0
 
1 answer

what is the actual size of the grille?

This question is from QT Series Very Quiet 80 CFM Ceiling Exhaust Bath Fan with Light and Night Light
Asked by
NH
Read all my Q&A
June 24, 2015
I am replacing an 11x16 and need this to be either slightly larger of the same dimensions
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

June 24, 2015
Answer: 
Thanks for your question. Here are the dimensions: Grille: 13” x 14”. Housing: 10-1/2” x 11-3/8” x 7-5/8”. This may not work for your replacement. You are welcomed to call our Customer Service Department at 888-336-3948. Thanks, again.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
2 »
  • 2016-08-24 T13:58:27.297-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_202491884, prod, sort_default
2 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 47ms
  • QUESTIONS, PRODUCT

Customer Reviews

  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 72ms
  • REVIEWS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;