0885785153604
Discontinued

Safety First

Model S1F5642SS

Internet #202204946

42 in. x 1-1/2 in. Concealed Screw Grab Bar in Stainless Steel-DISCONTINUED

This item has been discontinued.
The Home Depot no longer carries this specific product.

Frequently Bought Together

Product Overview

The Safety First 42 in. x 1-1/2 in. Concealed-Screw Grab Bar in Stainless Steel supports up to 500 lb. This safety feature adds security throughout the bathroom. Its concealed hardware and stainless finish provide a sophisticated look. Hardware is included with this item.

  • Heavy-duty, stainless-steel construction
  • ADA compliant
  • Concealed mounting screws and stainless finish for a sophisticated style
  • Supports up to 500 lb.
  • Use to help provide support and maintain balance for additional security in the bath
  • For wall mounting
  • Hardware included for easy installation

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

4 Questions19 Answers

Customer Questions & Answers

42 in. x 1-1/2 in. Concealed Screw Grab Bar in Stainless Steel-DISCONTINUED
42 in. x 1-1/2 in. Concealed Screw Grab Bar in Stainless Steel-DISCONTINUED

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
 
3 answers

How to properly mount grab bar?

This question is from 36 in. x 1-1/2 in. Concealed Screw Grab Bar in Peened and Bright Stainless Steel-DISCONTINUED
Asked by
Burt
Dalton, GA
May 22, 2013
I want to install this 36" grab/safety bar in our ceramic tile shower. What is the proper way to mount it? I do not think I will be able to use the studs.
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (3)

Asked by
St. Louis, MO, USA
Read all my Q&A
August 11, 2013
Answer: 
I'm an experienced amateur and make no claim to doing this the best way. I find a solid ceramic tile enclosure around the tub and shower to be one of the easier installs. The method I'm most confident with is to lay the grab bar in the position where the tub/shower user will find it most useful and determine which tile squares to drill into. I put masking tape over those squares where I plan to drill Read More
I'm an experienced amateur and make no claim to doing this the best way. I find a solid ceramic tile enclosure around the tub and shower to be one of the easier installs. The method I'm most confident with is to lay the grab bar in the position where the tub/shower user will find it most useful and determine which tile squares to drill into. I put masking tape over those squares where I plan to drill holes, put the grab bar back in place on top of the tape and use a Sharpie to make pin point dot at the center of the 3 holes at each end of the bar that I plan to use. I then use spring loaded center punch to put a slight ding in the ceramic right underneath the Sharpie "dots". I want the drill bit to start cutting in that slight indentation.
I use variable speed drill with a 5/8" carbide tile bit (purchased at Home Depot) to slowly drill a quarter inch or so into the tile surface at each of the black marks. The purpose of the masking tape is to keep the bit from wandering. If those holes are more than an 1/8" off it's going to become a messy installation. I prefer to avoid the grouted areas between the tiles and drill into solid ceramic tile (not too near the edges). I'll be using 5/8" Toggler Alligator anchors which I find very versalile and easy to use. At this point I've drilled through the ceramic tile deeply enoughto reduce the risk of cracking the tile and I'll now use a 5/8" SDS hammer drill bit to complete drilling the hole to the proper depth for the anchor. I could have used the ceramic bit in the standard drill to do several inches in but I'm trying to preserve the bit and save time by switching to a hammer drill. And if I started immediately with the hammer drill, I'm more like to crack the tile and wander off the marked hole. If I take my time I can tell if the SDS bit is running into a stud (that's a good thing, right!) Ideally I'd put all the grab bar screws into studs - but I'm not much good at accurately finding studs behind ceramic tile and I have no idea of exactly what's behind that tile, especially on an exterior wall. If there's an air space back there, the alligators will poke into it and spread their "wings". If I get through the tile and my bit is still finding resistance, I'll poke a nail into the hole and if it hits a stud, I stop drilling and a pan head screw without the Alligator anchor in that particular hole. If I go into a stud with a 5/8" bit too deeply, I can still use the Alligator achor - no problem. How deep to hammer drill if you don't hit an obstruction?
Just a bit deeper than the length of your Alligator anchors. BTW, these are made of different material than ordinary plastic anchors and I do NOT recommend those.
I used to use toggle bolts but it required a half inch hole in the ceramic for each screw and I never knew what length of bolt to push through the hole. If the ceramic is solid and sound I'm thinking the grab bar anchors will last as long as the tile is there. Good luck!
Fitz
PS I recommend a fresh SDS bit in a hammer drill as well as a slow drilling of no more than 1/2"
deep pilot holes. I don't use water to cool the bits. I use slow, steady pressure with sharp bits and a gentle touch with the hammer drill as well.
It's all about not breaking up the ceramic tile and getting a tight hole for the fasteners.
Read Less
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Evergreen, AL 36401, USA
Read all my Q&A
June 4, 2013
Answer: 
Find where you want to mount your bar and mark the holes. I use a glass-tile bit to bore the holes.Use a slow speed drill and a spray bottle of water. As you drill your holes, spray water on your bit as it drills the tile. Don't rush the job. After your holes are drilled, place your plastic anchors in the holes and fill the anchor holes with a good caulk. Place your bar in place and insert the screws. Read More
Find where you want to mount your bar and mark the holes. I use a glass-tile bit to bore the holes.Use a slow speed drill and a spray bottle of water. As you drill your holes, spray water on your bit as it drills the tile. Don't rush the job. After your holes are drilled, place your plastic anchors in the holes and fill the anchor holes with a good caulk. Place your bar in place and insert the screws. Again, don't rush the job. The stainless screws are soft and the head can strip out. Slide the covers over the screws and you're ready to go. Good luck! Read Less
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

May 22, 2013
Answer: 
At least one end of the Grab Bar must go into a Stud. The grab bar will not function properly if at least one of the ends is not attached to a Stud. You can use Anchors for the other end if needed.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
3 answers

specs say this is s.s. ,but yet white. will white flake, fall off in time?

This question is from 24 in. x 1-1/2 in. Concealed Screw Grab Bar in White -DISCONTINUED
Asked by
jim
iowa
May 9, 2013
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (3)

Asked by
Kissimmee, Florida
Read all my Q&A
August 13, 2013
Answer: 
Appears to be a vinyl coating. Looks extremely durable.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Palmyra, NJ, USA
Read all my Q&A
July 9, 2013
Answer: 
I have one of the grab bars I my bathroom right now and have had it there for over five years. there has been no deterioration of the surface whatsoever. I just purchased three more for a new bathroom which is being installed.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

May 10, 2013
Answer: 
The white is Powder Coated and should last the life of the Grab Bar.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
4 answers

what is weight of product

This question is from 36 in. x 1-1/2 in. Concealed Screw Grab Bar in Stainless Steel-DISCONTINUED
Asked by
g
February 4, 2013
+1point
1out of 1found this question helpful.
Was this helpful?helpful1unhelpful0

Answers (4)

Asked by
Gainesville, GA, USA
Read all my Q&A
June 4, 2013
Answer: 
3 lbs
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Issaquah, WA, USA
Read all my Q&A
April 2, 2013
Answer: 
3 pounds
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

March 6, 2013
Answer: 
each piece is no more than a pound or so...........
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

February 4, 2013
Answer: 
This Grab Bar is 2.75 pounds.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
9 answers

will this product screw into the narrow edge of a 2x4?

This question is from 42 in. x 1-1/2 in. Concealed Screw Grab Bar in Stainless Steel-DISCONTINUED
Asked by
Johnboy
November 23, 2012
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (9)

Asked by
Lancaster, OH
Read all my Q&A
September 5, 2013
Answer: 
Only 2 screws would hit he 2x4 They make a mounting system that can be used where there is no stud. I've never used it but it looks very sturdy. I installed this in new construction so was able to put blocks of wood between the studs where the bar was going to be mounted.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
41043
Read all my Q&A
August 22, 2013
Answer: 
It will not. The flange on the end is wider than the edge of a 2 x 4.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Read all my Q&A
August 6, 2013
Answer: 
Yes. Depending on the stud spacing, you may have to install at an angle to fasten both ends. See installation instructions that are provided with the product.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Chula Vista, CA, USA
Read all my Q&A
July 9, 2013
Answer: 
Yes, it can be screwed into the narrow edge of a 2 x 4, but be sure the screw is centered.
User submitted photo
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Decatur, GA, USA
Read all my Q&A
July 3, 2013
Answer: 
Some of the screws will align with the edge. You will need to use some very strong anchors for the other screws.
Another option is to install a nice finished piece of 1X4 or 1X6 or 2X4 or 2X6 about 6 inches longer than the handy cap bar, attaching it to all the studs with two #10X2.5" or 3.5"SS screws and attach the grab bar to it.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Spokane, WA, USA
Read all my Q&A
June 4, 2013
Answer: 
No, not securely.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Baton Rouge, LA, USA
Read all my Q&A
June 4, 2013
Answer: 
No. The narrow side of a 2X4 is only 1-5/8-inches wide. The tube, alone, is 1-1/2" in diameter. If you choose to screw it to the narow side of the 2X4, only two screws will line up.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Payson, AZ 85541, USA
Read all my Q&A
March 5, 2013
Answer: 
YES
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

November 26, 2012
Answer: 
You might be able to fit one of the screws into it but you would not be able to get 2 screws into it which is what is needed in order to hold the maximum weight capacity.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
1 of 1
  • 2016-09-22 T17:42:02.496-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_202204946, prod, sort_default
1 of 1
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 62ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 4.6 out of 5 by 58 reviewers.
Rated 5.0 out of 5.0 by excellent safety bar It is a very sturdy, stainless steel, safety bar that I had installed above a bathtub. While hardware (screws) and instructions are included, I think it requires someone to install it that has had experience installing safety bars...the consequences of not doing it well could mean a possible injury by the person using it, if it should become detached. July 9, 2013
Rated 5.0 out of 5.0 by Nice clean lines and dual functionality I bought these beautiful safety grab bars to outline the new boat dock we just built. They add a touch of class as well as offering swimmers an easy place to hold onto the dock. They also come in handy for tying up watercraft for mooring. Easy install and i could'nt beat the sale price. August 22, 2013
Rated 5.0 out of 5.0 by Easy to install and very strong with nice finish I needed a grab rail for the lower stairs in my bi-level house for my Mother-in-Law with a bad knee. She loves this rail and feels secure climbing up and down the stairs again. It was easy to install. I would highly recommend you get this model with the concealed fasteners since I was only able to put 2 screws on each end into the studs, and this way the extra holes are covered and it looks good. Two screws on each end into the studs are more than adequate for a secure installation. April 9, 2013
Rated 5.0 out of 5.0 by I Love these Grab Bars!! I use these Grab Bars Daily to help me get up and down. July 2, 2013
Rated 5.0 out of 5.0 by Safety rail This rail is good for elderly and people recovering from surgery to be able to use showers and tubs independently July 2, 2013
Rated 5.0 out of 5.0 by easy to install- great price - reliable merchant installed in 15 minutes - no joke. I like it too, that if you had a problem...Home depot will not let you down, they will help March 8, 2013
Rated 3.0 out of 5.0 by Bery good for the price i go it on line a little bit of work to instal it's a two person job look good work great bery study for an olderly person to hold on wen it needs to like my dad his 90 years old and can stil walk arownd and needs his pravacy wend he gose to the resroom i wold recomen it make sure wend u instal it it has to be drill in to a wall studs so it can soport anyones wend theuy hold on to it. July 30, 2013
Rated 5.0 out of 5.0 by THIS PRODUCT IS BETTER THAN DESCRIBED I USED THESE STAINLESS STEEL GRAB BARS IN MY MOTOR HOME IN SEVERAL PLACES TO INSURE THE SAFETY OF MY GUESTS WHILE COMING IN OR GOING OUT OF HOME AND THROUGHOUT MOTOR HOME AS I HAD PURCHASED THEM FROM HOME DEPOT BEFORE. June 25, 2013
  • 2016-09-23 T02:44:07.037-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_58, tr_58
  • loc_en_US, sid_202204946, prod, sort_default
2 3 >>
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 34ms
  • REVIEWS, PRODUCT