Model # NT 10 B

Internet #202804589

Store SO SKU #1000630154

Superior Building Supplies 4-1/4 in. x 3-7/8 in. x 14 ft. 9 in. Faux Wood Beam
0815268010735

Superior Building Supplies

4-1/4 in. x 3-7/8 in. x 14 ft. 9 in. Faux Wood Beam

$17677 /piece

Frequently Bought Together

Product Overview

The NT 10 is part of the Superior Building Supplies contemporary faux wood beam line. The NT 10 has a top notched or beaded corner. This faux beam comes prefinished in a interior grade golden pine finish which enriches it's fine grain. Superior Faux Beams provide warmth, character and a sense of history wherever they are used. Every Superior Faux Beam is hand stained to ensure a realistic color variance from beam to beam. If using the beams outdoors, we recommend purchasing unfinished beams and painting or staining them in an exterior grade product.

  • Light weight
  • Easy to install
  • Insect resistant
  • Virtually maintenance free
  • Very realistic
  • Moisture resistant
  • Doesn't warp, crack, split, twist or turn like real wood
  • Made from polyurethane

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

How do you connect the faux wood beam solid one to the ceiling??

How do you connect the faux wood beam solid one to the ceiling??
Asked by: Ladybug
I used drywall anchors with expandable end with a 2x4 piece maybe 4-6 inches long width cut slightly less than the inner dimensions of the open side of the beam, laid down a chalk to make sure it is straight drilled hole in ceiling to place expandable portion of the anchor into the ceiling with the cut 2x4 piece attached and tightened. I did mark with tape the location because it is hard to tell where your mount is once the beam is up and screwed it into place. I had complex cuts and used an digital angle finder (Husky Home depot) and it worked great to preciously get the beam to sealing angle. I installed in a cathedral ceiling area (review left on the site for our dinning area for pictures) and there was a complex junction with the top center beam. Using the angle finder and a scrap piece of the beam I laid the scrap on the side of the beam at the ceiling angle (using the angle finder) and traced out the contour of the center beam junction. Tough part is matching the opposite side cut, go slow and check your measurements to see if they are similar. I cut it with a osculating tool for a tight fit (within 1-2 mm) filled the small gaps with wood putty and it looked great. Nice product and very beautiful. By the way cut the beam an inch or so longer and trim it off in small segments to get the tightest fit. I pre-fit many times to see where the high spots with the adjacent beam or wall and trimmed down till it is nice and fit (some of the stain rubs off on the cut end section for information on tight or high areas) . Take your time and you'll be very happy. First one or two take the longest. Cuts easy with the osculating blade
Answered by: SteMK
Date published: 2017-06-17

Is this 4 or 3 sided and are both ends closed or just one end closed?

Asked by: artist
3 sided with the 4 side open for attaching. Both ends on my products were closed.
Answered by: SteMK
Date published: 2017-06-16

Is this 4-1/4 IN. X 3-7/8 IN. X 14 FT. 9 IN. FAUX WOOD BEAM restainable

I understand this beam is already stain but can it be stain darker?
Asked by: Carmen
Thank you for your question. Yes, you can stain or paint over the beam to make it darker.
Answered by: SuperiorBuildingSupplies
Date published: 2015-09-20
  • y_2017, m_6, d_23, h_7CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_3
  • loc_, sid_202804589, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 95ms
  • QUESTIONS, PRODUCT

Customer Reviews

4-1/4 in. x 3-7/8 in. x 14 ft. 9 in. Faux Wood Beam is rated 4.3 out of 5 by 4.
Rated 5 out of 5 by from Modified the ceiling in our dinning area and added the chalet beams and we are so happy with the ... Modified the ceiling in our dinning area and added the chalet beams and we are so happy with the product. It looks great and is easy to work with, Superior Building Supplies has a superb product.
Date published: 2017-06-16
Rated 5 out of 5 by from So easy to install & it looks so much like... So easy to install & it looks so much like real wood that we even forget that it's not! Highly recommend!!
Date published: 2017-04-11
Rated 5 out of 5 by from Great Product! Easy to install. No problems and they look great!!
Date published: 2015-08-11
Rated 2 out of 5 by from Good product but no directions and shipping and color problems OK product but no directions. Had to download video of a similar product from other website to figure out how to install. Replacement beam that arrived to replace damaged beam was different color
Date published: 2012-06-08
  • y_2017, m_6, d_23, h_14
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_4
  • loc_, sid_202804589, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 98ms
  • REVIEWS, PRODUCT