Rated 4.6 out of 5 by 7
Rated 5.0 out of 5.0 by Texas Easy to install
This light fixture is supplied fully assembled and ready to mount. It attaches to a standard electrical back box, and took me just two minutes to install.
The finish of the bar and mount is an oil rubbed bronze finish, and the shades have an amber look to them.
The light accommodates four standard A19 bulbs, we opted for 'daylight' LED bulbs as shown in the picture we uploaded.
It really dressed up the bathroom.
January 1, 2016
Rated 3.0 out of 5.0 by DonF Stylish
I like the appearance of this light, that's the reason for the Excellent under Appearance, it seems to be well made, so my hats off the the design team. On the down side, the light seems to be pricey for something made in China. Also the biggest issue is the light globes had a yellowish look to them, That's the reason for Fair under Quality, when we took the globes out of the packaging we used a damp paper towel to clean the Styrofoam off, that's when we noticed the yellowish had come off on the towel. So we clean with running water and a towel. See before and after photos. After they dried we now have 2 globes that have a frosted look to them, one that's amber looking, specially at the bottom rim and one that is both frosted and has a amber area about a quarter away around at the bottom rim. We're not sure we're going to keep it at this point.
October 29, 2015
Rated 5.0 out of 5.0 by JPN80 Modern and Bold impact for light fixture, easy to install
From the pictures, I was expecting a typical 4 light oil-rubbed bronze light fixture sans frills and was completely fine with that design; however, once I assembled the light shades to the light fixture, that's where the "wow" factor happened in my opinion. Those shades are delightfully huge and make the light fixture itself more pronounced feature in the bathroom; turn the lights on, the amber shades produce a nice ambient effect in the room.
Light Installation: Since all hardware was included, installation was really easy. The shades are slightly heavier than the light fixture itself - not a deal breaker for me; I think since the domes are bigger than the domes on an average light feature that might be the reason that they're heavier than others.
Light Fixture Description: It's oil-bronze color but it has more of a satin finish. The shades are frosted and amber in color.
October 15, 2015
Rated 5.0 out of 5.0 by Roger Great looking Bathroom lights
Jackson 4-Light Oil-Rubbed Bronze Wall Mount Bath Bar Light came ready to install straight out of the box. The metal parts of the fixture are light in weight but the light feels heavier as the glass shades are heavy. Glass shades fit tight and snug using the threads on the ceramic base. Once assembled we used LED bulbs to go with the light. The shades soften the lights a little bit but that adds to the overall look of the lights. This vanity light made a huge impact on t he overall looks of our bathroom.
May 1, 2016
Rated 5.0 out of 5.0 by ih82spd Nice look, easy install, mounts glass up or glass down.
Very stylish rubbed bronze light bar. Installation is quick and easy with this light fixture. It came with all required hardware for installation. It took less than 20 minutes to install. The glass diffuses a lot of light, so I switched to brighter bulbs to get the same brightness as what I had previously. My wife is very happy with the look of this new fixture.
November 26, 2015
Rated 5.0 out of 5.0 by Smarteboy Bathroom vanity light
I received this light for a bathroom remodel. The light was packaged very well from the factory, and was flawless when I opened it. The glass has an amber tint to it, which makes it look a little aged. The bronze finish is about your basic bronze finish that matches all of my bronze fixtures.
I had an outlet box above my mirror for install. Electrical connections were straight forward and easy. The light attached to the wall and looks great. I wish there was more that I could write about this light - it feels like a quality light, it works perfectly. The light it gives off is just right for the bathroom. The glass connects with a threaded nut on a porcelain spindle, which is superior to the screws that sit on the collar of the glass on other lights I have installed. I really like the clean lines and look of the metal parts on the light. I think it is a perfect mix of modern rustic.
I am happy with the fixture, and i think the price is good to about average. I visited a lighting store for fixtures, and the prices there were a lot more for basically the same thing.
November 8, 2015
Rated 4.0 out of 5.0 by pmikejunot Bronze finish, not Venetian bronze
This light fixture has a satin bronze finish, more like a brown satin paint than a metal finish. It does not have any copper accents, so don't confuse this finish with a Venetian bronze finish, as I did. Still, it works fine with my Venetian bronze faucet and hardware. I was also concerned about the glass shades. I prefer white shades with maximum light reflection. I was surprised at how much light these shades allowed through the amber colored glass. Also, the downward facing shades allow maximum light to be cast where it is most needed, in front of the mirror.
Although the thick glass shades are a heavy weight glass, the fixuture metal is lighter in weight. Despite this, the fixture is rock solid strong, moreso than fixtures much heavier. Nothing is loose, and I love the dual mounting posts, connecting the horizontal rod to the base. Also, this didn't present any problems with mounting the fixture, nor did I have any issues with the weight of the shades after everything was mounted. Just make sure the mounting screws are tight. (Also, make sure the installed juction box is securely mounted to the wall. The fixure will only be as secure as the mounted junction box.) The shades mount with a porcelain threaded ring inside the shade. This is a much better system than the traditional knurled set srews that tighten against the glass.
The installation is standard among this type of fixture, requiring a wall box with the appropriate wiring. Because of the oversized base plate, any recessed junction box will work, including standard switch boxes up to 2-gang sizes. The base plate measures 4 3/4" high x 7 3/4" wide, and looks great installed.
One nother note: the packaging of this fixture is great. The shades as well as the frame are custom fitted in one solid block of styrofoam, fitted perfectly to the cardboard box. I think this fixture would survive the worst any shipping company would have to offer!
Overall, despite the finish difference, amber shades, and the weight of the frame, this tixture looks good and functions great.
October 24, 2015