Model # 53743

Internet #202176089

Toro 570Z Pro Series Plastic 6 in. Pop-Up Sprinkler Head Body
0021038537436

Toro

570Z Pro Series Plastic 6 in. Pop-Up Sprinkler Head Body

$814 /each
store icon Loading Buying Options...
package icon Loading Buying Options...
Sorry, but we ran into issues loading these options. Please try refreshing.

Frequently Bought Together

Product Overview

The Toro 570Z Pro Series Plastic Pop-Up Sprinkler Head Body is constructed from plastic for durability. This sprinkler body features a built-in X-Flow shut-off device that eliminates water loss when the sprinkler nozzle is damaged or removed.

  • Add any Toro 570 nozzle to create a custom water-saving irrigation design
  • 6 in. pop-up height is ideal for clearing tall grass
  • 1/2 in. FNPT inlet
  • 15 sq. ft. of coverage
  • Plastic material
  • X-flow shut-off device helps eliminate water loss when the sprinkler nozzle is removed or damaged
  • Install Toro matched precipitation rate (MPR) nozzles to ensures even water distribution, any pattern and any radius to prevent over or under watered areas
  • Superior seal resists corrosion to prevent water waste
  • Patented zero flush seal saves water by preventing water loss when the system starts up
  • Flush plugs are included to keep dirt and debris out during maintenance or installation
  • 1/2 in. side inlet is included in addition to the 1/2 in. bottom inlet for ease of installation
  • 570Z Pro series body only sprinklers with X-flow are available in 4 in. (model 53742) and 6 in. (model 53743) pop-up lengths to accommodate short and tall landscape grasses, shrubs and ground cover

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

Hi, How can I replace a broker 6" Toro pop-up spray head with a side inlet? must get the inlet p...

Hi, How can I replace a broker 6" Toro pop-up spray head with a side inlet? must get the inlet pipe replaced? wish I can rotate the pop-up spray head off the inlet pipe somehow. Thanks,
Asked by: Roy
If you need to replace the entire spray body, the process will differ depending upon whether you installed the body using the bottom versus the side inlet. In either scenario, you will probably have to do some digging to access the connection point. Whether the connection is made on the bottom or the side, you may be able to get away with using the existing riser or Funny Pipe (swing pipe) connection. If not, you will need to dig a little deeper to access and replace the connector (riser/nipple or Funny Pipe connection). Once replaced, be sure to flush your system to remove any debris that could clog your heads. If only the head of the spray or the guts have been damaged, you can simply remove the existing cap (including spring, riser, nozzle, etc.) and screw a new cap (entire cap and inner assembly) into the old body.
Answered by: Toro
Date published: 2017-07-17

looking for a pop up for a small area 42" x 33" is there one?

Asked by: Anonymous
Try the Toro 5' MPR+ nozzle. The radius adjustment screw on the top of the nozzle can be turned to decrease the throw distance by 25%. Otherwise, we suggest using a drip irrigation micro-spray for this small of an area.
Answered by: Toro
Date published: 2015-09-17
  • y_2017, m_7, d_18, h_23CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_2
  • loc_, sid_202176089, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 66ms
  • QUESTIONS, PRODUCT

Customer Reviews

570Z Pro Series Plastic 6 in. Pop-Up Sprinkler Head Body is rated 3.0 out of 5 by 1.
Rated 3 out of 5 by from Valve ok without flow check valve I like toro products but the X flow does not work. Upon installing valves and runningt system, valves would not allow water flow. Had to pull the small flow check valve out of valve body. In calling toro for support, did not get a solution that worked. Valve works fine without the flow control. In talking to other folks who use and install sprinklers, they do not like this design and do not use it.
Date published: 2012-06-19
  • y_2017, m_7, d_19, h_7
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_1
  • loc_, sid_202176089, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 12ms
  • REVIEWS, PRODUCT