Model # RT550

Internet #100372043

Store SO SKU #1000238590

Ultra Protect 45 in. x 26 in. Rectangular Clear Polycarbonate Window Well Cover

Ultra Protect

45 in. x 26 in. Rectangular Clear Polycarbonate Window Well Cover

$84.40 /each

Frequently Bought Together

Product Overview

The "Ultra Protect" basement window well covers are designed with "Safety" and "Security" for your home and family in mind. These versatile basement window well covers are manufactured using virtually indestructible clear polycarbonate plastic riveted to a continuous structural grade aluminum angle rear support. These basement window well covers will support a minimum of 250 lbs. when properly installed using our patented "SAF-T Lock" Locking System that is included with each "Ultra Protect" window well cover. Installing these basement window well covers over your basement window wells minimizes the risk of persons falling into deep, uncovered, unprotected basement window wells, preventing possible injury. The model RT550 (45 in. x 26 in.) basement window well cover is designed for use over Rectangular shaped Egress basement window wells. Its versatility makes it possible to be installed and trimmed to the profile of any type (steel, plastic, brick, wood tie, concrete etc.) basement window wells. Once installed it can be trimmed to the profile (plus up to a 1 in. overhang around the perimeter) of the window well openings using an ordinary jigsaw with an aluminum cutting blade (8 to 12 teeth per in. blade for best results)to make for a perfect fit window well cover. A patented, solid steel locking system with pull pin release quickly unlocks the basement window well covers (without the use of a tool, required by code) from inside the basement window well.

  • Basement window wells are the #1 entry point for home burglaries, deter intruders with "Ultra Protect" basement window well covers
  • Made with durable UV protected clear polycarbonate plastic and high strength structural grade aluminum
  • Installation hardware includes our patented & secure “SAF-T Lock” locking system to help keep your home safe and secure
  • Supports a minimum of 250 lbs. when installed using our “SAF-T lock” locking system (included)
  • 21 stock sizes to choose from
  • Can be trimmed to the profile of any shape or type window well for a perfect fit
  • When choosing an “Ultra Protect” basement window well cover be sure to choose a cover large enough to be cut to the size & profile plus a minimum 1/2 in. overhang of the window well
  • Durable and lightweight so even young children can lift cover off and escape in case of emergency
  • Keeps out unwanted animals, debris and precipitation
  • Meets or exceeds IBC & IFC building codes
  • Limited lifetime guarantee

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.




Warranty / Certifications

More Products With These Features


Customer Questions & Answers

  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 54ms
  • bvseo-msg: The resource to the URL or file is currently unavailable.;

Customer Reviews

45 in. x 26 in. Rectangular Clear Polycarbonate Window Well Cover is rated 4.0 out of 5 by 12.
Rated 3 out of 5 by from a lot of work Still a LOT of work Especially the need for a hammer drill for concrete braces..either have to rent one, borrow or buyone .. or take an hour per hole....4 holes... will not use cotter pins to secure. ..a person tring to get out probably would panic trying to release 4 of them
Date published: 2016-08-23
Rated 5 out of 5 by from High Quality and did the job very well ! This unit was used on a concrete window well over 100 years old but required very little modification. Because of how the house and window well were configured, I decided to join the cover to the house through siding at about 15 degrees so water would run away from the house. I also used a pair of small brass hinges for the attachment. This way I just lift the cover up for any cleaning of the well from leaves, etc. I also put a small latch in the center of the aluminum frame to hold the cover open during cleaning. Everything has worked out great! Unit was a little expensive but in this case I got what I paid for.
Date published: 2016-07-05
Rated 3 out of 5 by from Decent window well covers Decent product but I wouldn't trust anyone weighing 250 to walk on them. I installed them at an angle to promote run-off and get some air circulation at the sides. Made supports out of 2X6" cedar boards braced with 6in lengths of PT balusters attached with stainless L brackets. Just set the back edge of the cover on the board. Also used strips of white vinyl interior trim attached with construction adhesive to camouflage the bright aluminum support pieces because they looked weird with our old house. Had to make cuts in one to allow for AC lines. The aluminum was tough to cut but the plastic cut easily with a jigsaw. They're a vast improvement over the flimsy pieces of corrugated plastic that my husband used for covers, that I fell through once and the grandkids fell through twice.
Date published: 2013-08-21
Rated 3 out of 5 by from Window well cover Was not aware when buying the cover that it attaches to the outside of the well rather than the wall of the house. The cover cannot be attached to the well if you live in an old house (ours is circa 1938) if the perimeter of the well is brick. We have the cover just sitting on the well which is not ideal. Seems strong and would work well on a newer home. Expensive for what it is.
Date published: 2006-07-14
Rated 3 out of 5 by from Overpriced I was disappointed in the quality of this product. It was basically a piece of polycarbonate with a few pieces of aluminum riveted on. Easy to manufacture yourself for under $30 which is what I intend to do. If you have the skill to install this, you could easily make it yourself.
Date published: 2016-07-19
Rated 4 out of 5 by from What I Was Looking For Shipped to my door quickly, no damage to packaging. You must drill your own mounting holes but this is to account for all the slight variations of installed well frames. I'm not a fan of the latch system so I modified it and used my old clips. Bottom line it's what I was looking for to replace the previous covers which were less sturdy and worn out.
Date published: 2015-11-10
Rated 5 out of 5 by from Just What I Needed This is a very heavy duty window well cover that I purchased as a replacement for a very flimsy one that cracked when I inadvertently stepped on it when it was covered with snow. While I haven't tried to bear my 110 pound weight on this one, I believe that it could easily stand up to it.
Date published: 2014-07-01
Rated 3 out of 5 by from Nice product but very poor installation instructions The directions for installation were essentially unintelligible to this non-engineer. I fortunately had no need for it to swing open, so I just screwed it to the house which worked fine. There is no way I could have figured out how to install it to swing open with the directions which were provided. The product itself seems adequate for the purpose.
Date published: 2012-08-07
  • y_2017, m_1, d_17, h_1
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_12
  • loc_, sid_100372043, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 35ms