Rated 4.0 out of 5 by 23
Rated 5.0 out of 5.0 by Brandon Great product. Easy installation
This rail kit was easy to assemble and install. I cut this down to a 4' section and mounted it between my house and a 50" post. I couldn't find the exact post I wanted on Home Depot's website, so I contacted the manufacturer and they were happy to make a welded base, 50" bronze post for my application; and I only needed one! Dan at Madden Manufacturing was extremely helpful and quick to respond. I can't believe Home Depot doesn't stock these in store. When compared with the stuff in store, this is much better.
April 14, 2015
Rated 4.0 out of 5.0 by HomeDIYer Good American made product
The railings were put on a second floor roof deck 7'x18'x7', no stairs, and it took two people all day. They were pretty easy to cut to length and assemble, but be warned, you should download the newest instructions from the manufacturer website as the ones that came in the box were incorrect in a couple of details.
1. Holes to anchor the posts to the deck bracket should not be drilled one above the other at 3/4" and 1 1/4". There is not enough room to use washers and the bolt heads nearly touch. The downloaded instructions describe
the bolts as installed at 90% to each other. A more secure approach.
2. Railing mounts do not have bolt holes in the casting to secure the railing to the mount. The only predrilled holes secure the mount to the post. They should be drilled and the railing screwed to the mount also, so the railings do no float between the posts.
November 5, 2011
Rated 4.0 out of 5.0 by XRinger For the very handy Handyman..
When I wanted to transition downwards (two steps), the install manual wasn't a lot of help. I had a 35 deg step, so I used a level on a stick between the rail (swivel) mounting brackets taped to the two posts. When the level said 35 degs and the stick was cut to fit into the bottoms of the swivel mounting brackets, then I knew how long to cut the down-rails..
PS: I ordered the taller posts, I was afraid that my bottom step post would be too short, so I planned to cut off the tops of any too-tall posts. But, I kinda like the Castle look.
October 6, 2012
Rated 5.0 out of 5.0 by DIYinUT Great Looking Railing When Finished.
The railing may be tough for some beginner do-it-yourselfer's. It took me about 4 hours total to install this railing start to finish. All in all in happy with the outcome, though I'm not a big fan of working with metal. however this is far better than any vinyl step option as or wood for out door use. and the results turned out better than expected.
This product arrived in an 8ft box with everything you need inside.
When mounting the posts to concrete you will really want to use a hammer drill with a concrete bit. A high speed drill and masonry bit will get you nowhere fast.
The instructions will suggest to mark the four holes with the base of the post and drill the holes. Be vary careful doing this. if the hole is off my less than a 1/16th of an inch you will have issues install all 4 bolts without stripping out the concrete. you cannot force the bolts or the concrete will strip out.
To install the posts I marked the hole locations. Drilled the first hole and installed the bolt half way. I then lined up the holes and drilled the remaining 4 holes. To prevent damage or scratching to the posts I took an old sock and cut the end off and slipped it over the post. also be aware that concrete is not always even or flat. make sure to use a bubble level and shim as you go. it will save you a bunch of headache further along in the process. I used the flat washers to shim as the kit didn't come with anything else.
I found the rise over run chart to not be accurate. I compared this to an actual angle finder that I have. According to the chart my angle should have been 30.5. however it was actually 38 degrees. I would highly suggest using an angle finder and discarding the table found in the manual. the manual suggests downloading free apps. I would suggest doing so.
Also, since this it is aluminum you will need to clean and de-bur any cuts you make to the metal. It was mostly an issue with cutting the bolsters with a miter saw for the steps. I used a file to clean the edges and a small drill to clean the screw holes to help with installation.
September 22, 2013
Rated 5.0 out of 5.0 by diybeginner high quality beautiful product
After reading reviews by others and comparing with several other types of handrails such as composite and vinyl, I decided to buy this product. For me, I feel pickets / balusters of composite or vinyl are too wide (1.5 inch). EZ Handrail's 1 inch picket is just right for the small size of our porch. Delivery was very quick. As a DIY beginner, it took me a while to install it. But once installed, it looks so beautiful and sturdy. Time well spent.
By the way, I learnt from other's review about installing the post (pasted here for quicker reference). Thank you HomerDiyer! "Holes to anchor the posts to the deck bracket should not be drilled one above the other at 3/4" and 1 1/4". There is not enough room to use washers and the bolt heads nearly touch. The downloaded instructions describe the bolts as installed at 90 degree to each other. A more secure approach."
One more thing, I called the manufacturer asking some installation questions. Dan was so friendly and helpful. Thank you!
July 31, 2012
Rated 4.0 out of 5.0 by ThisOldGarageNJ I been working on the Rail Kit.....
I couldn’t have found this item at a better time. After 40 years my current homeowner’s insurance company decided I needed a railing on only one end of my front porch, This fit the bill exactly. I was able to assemble, cut, drill and install in less than 2 hours. Once installed I had a solid well-built railing that matched fairly well to what the rest of the porch had, and was approved by my homeowners insurance for safety and at an economical price….. I didn’t want to order 2 when I got this because I wanted to see how it would look and work out, I will be ordering another to match for the other end of the porch.
• Ships in one box
• Each piece is well wrapped and packed to prevent any
scratches or damage
• Well written clear & concise instructions with good
• All materials are well painted and solid
• You are able to customize size
• 1. Lay out pieces
• 2. Assemble railing
• 3. Attach to structure
• 4. Sit and relax
December 17, 2013
Rated 5.0 out of 5.0 by Fish overall very happy with the product
Items were ordered through the store shipping was fast all items were there and in good condition many compliments on how good the railing looks. Much better looking than other railing systems that were available in store. You need to have a sample in store so everyone can compare this railing with the others that are offered.
September 4, 2013
Rated 5.0 out of 5.0 by palaranda Very solid Rail
This is my second time getting another of the Baluster Railing. In my first review I stated my frustration of trying to cut it to size and fit them by myself and having to acquire a friend to assist in the assembly as well as the fitting to my multi-story decking. However I found it was much easier the second time round and completed the work without needing assistance (practice makes perfect) Again as stated in my last review, the railing is very sturdy and well-made and really is in a class of its own.
My first Baluster 8’ rail has been fitted on my multi-story decking for a couple of months now and despite the snow and the freezing rain, it still has retains that `brand new look`
Supplied with the Baluster Railing are the four post mounts so be aware that if you have to cut the rail and use it as a two piece, you have to buy another four post mounts (2 top, 2 bottom) plus of course extra posts.
Having said that, the unit, once completed and set, it is a perfect addition to the porch/decking. It looks nice and is very sturdy and well worth the effort. It is well made and is supplied with good solid accessories.
April 23, 2013