Q:Is this laser safe? Can I cut to engrave this wood using laser cutters?
by|Sep 16, 2020
1 Answer
Answer This Question
A: I would not recommend our bending panels for use in a laser machine. We have other products that work better for this application. Email me at mhale@cfpwood.com if you would like some recommendations. Thanks -- Michael
by|Sep 16, 2020
Q:I do not need this to be bent around anything. I just need a cabinet grade 3/8 plywood for a drawer front. Will this product serve my needs or is there another, non-bending product available?
by|Aug 20, 2020
1 Answer
Answer This Question
A: This product is specifically designed to be used in curved applications. I would not recommend it for a project that requires a flat panel. If you specifically need 3/8" thick plywood, I may be able to help you find some options. Give me a call at 336-291-5869 so we can discuss. Thank you -- Michael
by|Dec 27, 2020
2 found this answer helpful
Q:Can you cut a piece of ply wood into a 5ft star ?
by|Aug 7, 2020
1 Answer
Answer This Question
A: I would like to discuss this with you in more detail before providing an answer. Give me a call at 336-291-5869 if you would like to discuss. Thanks -- Michael
by|Sep 29, 2020
1 found this answer helpful
Q:What type or specie if wood is this pluwood made from? I’m trying to match a maple kitchen cabinet .
by|Aug 2, 2020
1 Answer
Answer This Question
A: There are a couple of different species this product is made of, depending on the type and your location. Keep in mind, it is an unfinished panel, designed to achieve a certain form. It is typically finished with a paper veneer or something similar for aesthetic purposes. Contact me at mhale@cfpwood.com if you would like to discuss. -- Michael
by|Aug 2, 2020
Q:Can this be used for marine use behind vinyl and foam pading.
by|Jul 12, 2020
1 Answer
Answer This Question
A: This is not marine grade plywood, it is meant for interior, decorative use only
by|Jul 12, 2020
Q:Can this be treated to be used outdoors?
by|Jul 6, 2020
1 Answer
Answer This Question
A: We do not recommend this product for exterior use. It is designed for interior, decorative applications only.
by|Jul 7, 2020
Q:I want to “sister” my sink cabinet floor. I had to cut out a water-damaged section. I want to use thin plywood to cover the entire floor area instead of 3/4” so it won’t be so clunky. There’s a big gap where I plan to put some supports under it, but the new floor will span sections of about 8”, so I need it to be firm
by|Jun 27, 2020
1 Answer
Answer This Question
A: Hello, the panel is not “floppy”. It will not be as rigid as a non-bending panel. If you are only spanning 8”, this should be fine. You may consider using the ¼” panels we have available online, for example the ¼” maple. Thanks, Kevin
by|Aug 20, 2020
1 found this answer helpful
Q:can this be painted
by|Jun 25, 2020
1 Answer
Answer This Question
A: This can be painted, but keep in mind the outer veneer is a rough, unfinished veneer. More commonly, this panel is finished with a paper veneer or other type of adhesive finish.
by|Jun 25, 2020
Q:Is one side truly smooth. I need to glue vinyl headliner material to one side and the surface needs to be fairly smooth or the undulations will show through.
by|Jun 7, 2020
1 Answer
Answer This Question
A: Both sides of the panel are unfinished, they are not sanded smooth