Questions and Answers for Everbilt 1/8 in. x 30 ft. Vinyl Coated Steel Wire Rope Kit

A:  Everbilt 1/8 in. x 30 ft. Vinyl Coated Steel Wire Rope Kit, Metallics can be cut with a heavy duty bolt cutter or with a grinder.

A:  you put one end through the clamp, then loop  that end around thimble, and insert the wire it in the clamp , and tighten the clamp nuts.

A:  This is why I come to the comments. Thanks for the info.

A:  no 1/4" would

A:  Yes, Everbilt 1/8 in. x 30 ft. Vinyl Coated Steel Wire Rope Kit can be used to tie out the dog, but we would recommend model # 803202 / internet # 203958753 which was designed specifically for dogs.

A:  I would say yes to that question. I used it to hold a leaning tree that was going to fall on my shed. I cranked it in the other direction and cut the tree down. It was a pretty big and heavy tree.

A:  The Everbilt 1/8 in. x 30 ft. Vinyl Coated Steel Wire Rope Kit can be used for a variety of projects. This product may be able to support your shade cloth depending on the span between connections and the tautness of the wire rope. Please contact a local professional or store associate for specific questions regarding your project.

A:  It takes quite a bit of tension to keep it straight and not sagging, so it really depends on what you’re hooking it to.  It would work, but it is a tad overkill.

A:  Everbilt 1/8 in. x 30 ft. Vinyl Coated Steel Wire Rope Kit, Metallics can be used to hang curtains as a room divider. However we would recommend using a traditional curtain rod system to hang curtains.

A:  I would suggest a ceiling mounted curtain hanger. I don't think this item would best suit your intended use.

A:  No. This would be ok, the esthetics , because of the hardware , is utilitarian, and might not be that pleasing .

A:  Mine came with the right hardware, not sure what size. Seems very sturdy to me. I didn't remove the vinal coating. Probably can make stronger connection without it.

A:  Yes. Purchased in July 2023 and the hardware is for 3/16 wire rope.

A:  Internet #205887568 and Model #43104 is a product with same thimble and clamps, but without the wire.

A:  Yup… don’t see why you couldn’t do that

A:  Yes, you should be able to use the Everbilt 1/8 in. x 30 ft. Vinyl Coated Steel Wire Rope Kit to help in stringing outdoor lights.

A:  Lo compre pensando en instalar mi juego de luces de patio y es un exito para la instalacion de la luces de patio Lo recomiendo facil de instalar ,es fuerte y duradero aparte que le da un toke elegante a tus luces de patio.

A:  No I used for my Antenna

A:  Yes, I used these to hand my string lights.

A:  The torque requirement is 4.5 lbs/ft. There are 3 clips at each end and there is no specific requirement for amount of rope to turn back in inches for Everbilt 1/8 in. x 30 ft. Vinyl Coated Steel Wire Rope Kit, Metallics.