Q:can i use these lights in a pvc soffit porch celing
by|Aug 16, 2023
1 Answer
Answer This Question
A: Please note Yes, HLBSL4069FS35 are cULus certified type IC suitable for direct contact with air permeable insulation, Not recommended for use in direct contact with spray foam insulation, reference NEMA LSD57-2013. refer to the below link for more information.
https://images.thdstatic.com/catalog/pdfImages/bc/bc52f967-47e2-4b0a-9f3f-2b8aa2257453.pdf
by|Aug 17, 2023
Q:Currently I have a fan on a wall switch. Can I run a wire from the fan to one of the 4" light and daisy chain to the other 3? I realize they will all come on but I can turn the fan off by pull chain.
by|Aug 13, 2023
1 Answer
Answer This Question
A: Please this question can be better assisted by local electrician.
by|Dec 19, 2023
Q:Can I use the Halo 6" lights on the driver junction box that came with the 4" versions?
by|Jul 24, 2023
1 Answer
Answer This Question
A: Please not you cannot use the 6"fixture with 4" driver box. Each fixture comes with Junction box.
by|Sep 18, 2023
1 found this answer helpful
Q:Installed a Leviton slide dimmer switch lights are popping when turned on?
by|Jul 19, 2023
1 Answer
Answer This Question
A: The popping is purely mechanical. There is a tin plate underneath the lens that is expanding when heating up and pops outwards. There is no risk of overheating or premature failure for this fixture.
by|Feb 13, 2024
1 found this answer helpful
Q:I have sunco recessed led 4inch lighting. For some reason.They keep burning out on me and i have to constantly replace them.I checked the ballast and it is not the ballast. Are the connectors on the HALO recessed lights able to connect to another ballast?
by|Jul 14, 2023
0 Answer
Answer This Question
Q:Is the junction box supposed to be hot? It is hot after the lights are on for awhile, I know this because I went to paint the ceiling and let the light ? dangle? so I could paint and I noticed the junction box was hot when removing it from the ceiling.
by|Jul 10, 2023
1 Answer
Answer This Question
A: Please note the junction box and fixture will be hot to the touch. The wiring and component above the ceiling are rated for 90°C.
by|Jul 10, 2023
Q:I currently have PAR20 lights installed in the ceiling. Can I easily replace them with this product?
by|Jul 3, 2023
1 Answer
Answer This Question
A: Please note HLBSL4069FS351EMWR can be installed in 3/8” to 5/8” thick ceilings Round ceiling cutout. Refer the below link for more information.
https://www.cooperlighting.com/api/assets/v1/file/CLS/content/23bd1668d4d44416939bad41007de845/halo-hlbsl4-module-spec_hlbsl4069fs351emwr
by|Jul 4, 2023
Q:do these come in a soft offwhite vs a harsh bright white
by|Jul 1, 2023
1 Answer
Answer This Question
A: Please refer the below link for more information.
https://www.cooperlighting.com/api/assets/v1/file/CLS/content/23bd1668d4d44416939bad41007de845/halo-hlbsl4-module-spec_hlbsl4069fs231emwr
by|Jul 11, 2023
1 found this answer helpful
Q:What is the lumen output for each of these fixtures?
by|Jun 29, 2023
1 Answer
Answer This Question
A: Please note HLBSL4069FS351EMWR has 650 lumens output for each fixture, refer the link below for more information.
https://www.cooperlighting.com/api/assets/v1/file/CLS/content/23bd1668d4d44416939bad41007de845/halo-hlbsl4-module-spec_hlbsl4069fs351emwr
by|Sep 18, 2023
1 found this answer helpful
Q:Are these dimmable
by|Jun 27, 2023
2 Answers
Answer This Question
A: yes, with led dimmer.
by|Feb 24, 2024
1 found this answer helpful
A: Yes HLBSL6099FS35 is dimmable, refer the below link for more details,
https://images.thdstatic.com/catalog/pdfImages/59/59104303-442a-48bf-8955-0f1e3f3a39c9.pdf